Dual-Row Bright 48V Long Addressable UCS7624 RGBW LED Strip (to 20 Meters)

Introducing the ultimate solution for large-scale, dynamic lighting projects: the 48V UCS7624/UCS7614 Addressable RGBW LED Strip. Engineered specifically to overcome voltage drop, this strip allows for continuous runs of up to 20 meters from a single power connection, drastically simplifying wiring and reducing installation costs. The high-voltage 48V DC input is the core of the strip's long-run capability, allowing current to be transmitted more efficiently over copper traces, maintaining consistent voltage and brightness.

Featuring a high-density, dual-row design with 168 LEDs per meter and dual-signal redundancy, the UCS7624/UCS7614 IC incorporates a backup data line (BI) alongside the primary data line (DI). This redundancy ensures that the failure of any single IC does not affect data transmission to subsequent ICs, dramatically improving the robustness of the entire lighting system.

Our bright addressable RGBW led strip delivers brilliant, reliable performance for professional architectural facades, expansive commercial spaces, and ambitious creative installations where length and reliability are paramount. With 12 individually controllable ICs per meter, you can achieve smooth animations and high-resolution lighting effects, even over vast distances.

How do I control and power a 48V Addressable RGBW LED strip light?

To control this 48V addressable RGBW LED strip, you need a pixel controller that is fully compatible with the UCS7624/UCS7614 or UCS2904 RGBW IC protocol. Some standard controllers, such as the SP107E and SP530E, are not compatible with this UCS7624/UCS7614 IC, so please make sure your controller IC library includes this IC model.

If your pixel controller does not support a 48V direct power input, here is how to step-by-step:

1. Powering the Controller: Use a separate, low-voltage small power adapter (such as DC 12V 1A or DC 24V 1A) that matches your controller's input specs to power it on independently.

2. Connecting Signals: Connect only the Data (DAT) output wire and the Negative/Ground (GND/-) wire from the controller to the corresponding ports on the digital 48V LED strip.

3. Powering the LED Strip: Connect the 48V addressable LED strip directly to a dedicated 48V power supply that has sufficient wattage to cover the total length of your strip.

Product Specifications

Parameter	Details
Product Model	48V-UCS7624-RGBW-168W15
Input Voltage	DC 48V
Power Consumption	17.4 Watts per meter
IC Type	UCS7624/UCS7614 (Dual Signal, Breakpoint Resume)
IC Quantity	12 ICs per meter
LED Type	SMD 5050 RGBW (4-in-1)
LED Density	168 LEDs per meter
Pixel Configuration	14 LEDs per pixel (per IC)
Color	RGB + White
PCB Width	15mm
Max Run Length	20 meters (65.6 feet) with single-end power feed
Cutting Unit	Every 14 LEDs (approx. 83.33mm / 3.28 inches)
IP Rating	IP20, IP67, IP68
Operating Temperature	-20°C to +50°C

Power Consumption Reference

⚠ Precautions

• This product requires a 48V DC power supply (sold separately). Using any other voltage will damage the strip.
• This product requires an addressable LED controller compatible with UCS7624/UCS7614 signal protocols (sold separately).
• Handle the strip carefully, avoiding excessive pulling or stress on the PCB and components.
• Static electricity can damage the ICs. Use anti-static precautions during installation.