Related Products
Tick the accessories you need and add them in one go
€105.95
€19.42
€14.99
€7.93
€48.55
€40.60€44.158% off
€46.78€52.9612% off
Product Information
1. LED density is 55LEDs/Ft super bright, it is the brightest TM1934 addressable LED strip light, you can customize the IP67/68, suitable for indoor & outdoor large space lighting.
2. Special Triple rows arranging structure, PCB wide is 30mm/1.18in, with a good heat dissipation; works with the LED aluminum channel or LED neon light, softly achieve the whole roll without light spot.
3. Support DC24V low voltage input, every triple rows 6LEDs cuttable, you can customize the length of LED strip light, 10m/32.8Ft without voltage drop.
4. Breakpoint resume programmable LED strip, a single pixel failure will not affect the signal transmission unless two consecutive adjacent pixels fail.
Product Feature
-
TM1934 Epistar IC
-
Adopt high voltage power CMOS process
-
55LEDs/Ft Super density
-
Multiple waterproof level available
-
Triple rows 1.18in wide LED strip
-
DC24V input voltage
-
6LEDs cuttable, customize length
-
Breakpoint resume dual channel
-
256 gray levels available
-
Built-in 5V regulator in VDD
-
Built-in RC oscillation
-
Built-in power-on reset circuit
-
Data transmission rate up to 800KHz
-
16 million dynamic color chasing effects
Standards and Certifications
Product Specifications
Product Name: 5050 TM1934 External IC addressable RGB LED strip light
IC Type: Epistar
PCB Width: 30mm/1.18in
Input Voltage: DC24V
LED Chip Model: TM1934 IC
LED Resource: SMD 5050 RGB
PCB Color: Black
Colors: Full-color RGB, dream color changing;
Greyscale: 256 levels
Average Life (hrs): 50000Hours+
Beam Angle: 120 degrees
Circuit Board: Double-sided FPC electrolytic copper circuit board
Cuttable: 6LEDs
LED Quantities: 55LEDs/Ft, 180 LEDs/m
Rated Power: 13W/Ft; 43.2W/m; 216W/Roll
Waterproof Rating: IP20(non-waterproof) IP65/67/68(waterproof)
IC Quantities: 10ICs/m
Package List:
1* TM1934 16.4Ft 900LEDs addressable LED strip light
For indoor environment, you can choose the CONFULL-SP107E LED controller.
For outdoor environment, you can choose the CONFULL-SP107E LED controller + WATERPROOFIP67BOX.
How to choose LED power supply and LED controller?
For the LED power supply, the power of the LED strip light is 216W/roll, to avoid the power load, the power of the LED power supply must be 216*1.2=259.2W.
For indoor environment, you can consider the LRS-350-24 MW UL-Listed LED power supply.
For outdoor environment, you can consider the PSWP-24V-300W waterproof LED power supply.
Pin Function
DO: Control data signal output
DI: Control data signal input
BO: Backup control data signal output
BI: a Backup control data signal input
GND: Data &Power Grounding
How to install addressable led strip lights?
Addressable LED Strip Lights Wiring Diagram
| ►Connection method one: |
*SPI LED Strip lights wiring diagram with 5m*
| ►Connection method two: |
*SPI LED Strip lights wiring diagram with 10m*
| ►How to connect the 3-pin JST connector to the Breakpoint Resume LED strips? |
| ►How to power addressable LED strip and SPI controller using different voltage power supply? |
| ►How to wire a ultra long addressable led strip lighting? |
*SPI LED Strip lights wiring diagram with 20m+*
Reviews
Customer Experience
Your feedback is important to us! Share your thoughts and photos with other customers.
Downloads
Files for DCFLS-24V-TM1934X900Images
These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!
LED Strip Light Guide
Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.
Customers who bought this product also purchased...
Scroll for more →
