Dual Signal 12V RGBW DMX Controlled Rope Light 300 LEDs 16ft

Name: Dual Signal 12V RGBW DMX Controlled Rope Light 300 LEDs 16ft
Brand: SuperLightingLED
SKU: DCFLS-DMX512-12VX300-RGBW
Price: 80.98 CAD
Availability: InStock

Model: DCFLS-DMX512-12VX300-RGBW Review stars

0.0 (0 Reviews) Various options in stock

Starting at: Can.$114.36

Qty Discounts Off Price
2-9 Can.$114.36	10-19 Can.$112.64	20-49 Can.$112.07	50+ Can.$109.79
* Discounts may vary based on options below

Select Specifications:

Select PCB Width:

12mm (0.47in)

Select Light Color :

Select PCB Color :

Select Waterproof Rating:

Select LED Quantity:

60 LEDs/m

Qty: -+Min: 2
*Mixed OFF

Free shipping over $299Ships via DHL / UPSWarranty covered

Accept the project customization, please contact us for commercial offers and technical support.

Product Information

A dual data signal 5 pin dmx controlled RGBW rope light with 60 LEDs per meter, DC 12 volts power input. Each 3-LED segment of this dmx RGBW led tape is controlled by a 10-pin UCS512H4L DMX512 IC chip, so three LEDs are a pixel, there are 20 pixels per meter, 100 pixels per reel.

This RGBW dmx light strip is compatible with your dmx lighting control system, no additional decoder required. With powerful dmx control, you can take RGBW color combinations to the extreme and create stunning lighting changes.

12V RGBW dmx led strip has a shorter cut length to more accurately fit your installation length needs. Cut every 50mm (2 inches). 12mm PCB wide.

DMX512 IC Chip UCS512H5L Datasheet

Product Specifications

Item Type:	12V DMX Controlled RGBW LED Strip
LED Chip:	SMD 5050
Input Voltage:	DC12V
Power:	18W/m, 90W/Roll
LED Color:	Addressable RGB+3000K/4000K/6000K
PCB Width:	12mm/0.47"
IC Chip:	10-pin UCS512H5L IC
Cut Length:	3-LED / 50mm
Pixel:	20/m, 100/Roll
Waterproof Rating:	Non-waterproof IP20, Indoor Waterproof IP65, Outdoor Waterproof IP67 IP68
Strip Length:	5m/16.4ft
Beam Angle:	120°
Lifespan:	50,000+hours

5-Pin RGBW DMX Lighting Wiring Diagram:

K-1000C connects dmx led strip lights

RGBW DMX 512 LED Strip

Reviews

Customer Experience

Your feedback is important to us! Share your thoughts and photos with other customers.

Write a Review & Upload Photos

Downloads

Files for DCFLS-DMX512-12VX300-RGBW

PDFDCFLS-DMX512-12VX300-RGBW product data sheetFull specifications, dimensions, cut points, wiring and IP options — the same details shown on this page, laid out for printing and engineering review.PDF · generated from the current product page · opens in a new tabOpen PDF

Need this page for a project file or an engineering check? Click Open PDF, then save or print it from your browser. For CAD drawings, IES files or a signed test report, contact our engineers and quote the model number.

Images

These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

LED Strip Light Guide

Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.

Which controller does this LED strip light need?

Addressable LED strip lights take a data signal, so they need an SPI (pixel) controller that supports this IC — an ordinary RGB controller will not drive them. Data flows one way: connect the controller to the input end marked with the arrow. Wiring addressable LED strip lights

Do I need power injection?

5 V addressable LED strip lights lose voltage fastest, so longer runs need power fed in at both ends and at intervals along the run; 12 V and 24 V versions carry further. Keep the data line short between controller and first pixel. Choosing an addressable LED strip light

Which waterproof rating should I choose?

Available on this model: Underwater IP68 - Adhesive Back · Outdoor Silicone Tube IP67 - With Brackets · Surface Glued IP65 - Adhesive Back · Non-Waterproof IP20 - Adhesive Back. IP20 is for dry indoor use, IP65 handles splashes, IP67 suits outdoor and wet areas, IP68 is for continuous submersion. Choosing a waterproof rating

Can I cut it to length?

Yes. Cut only on the marked cut lines between the copper pads — the cut interval for this model is on its spec sheet. Rejoin with solder or a solderless connector. Cutting LED strip lights · we can also cut to length and fit your connector before shipping: custom LED strip light assembly.

What size power supply do I need?

Take the watts per metre from the specification above, multiply by the length you are running, then add about 25% headroom. Power calculation guide · Choosing a power supply

Will it fit an aluminium profile, and how dense are the LEDs?

PCB width 12mm (0.47in) · LED density 60 LEDs/m. Choose a profile whose inner width is at least the PCB width; denser LEDs give a smoother line close to a diffuser. LED aluminium profiles

Complete your setup

Picked for this model from items in stock.

Controllers and dimmersFor RGBW LED strip lights at 12 V