External SK6813 RGBIC Great Wall Shape Bendable LED Strip Light

Model: GW-SK6813-RGB-60 Review stars 0.0 (0 Reviews) Various options in stock
Starting at: $30.98
Select Specifications:
Select PCB Width:
Select Length:
Select Waterproof Rating:
Qty: -+Min:  100
*Mixed OFF
Free shipping over $299Ships via DHL / UPSWarranty covered

Accept the project customization, please contact us for commercial offers and technical support.

  • Product Information
  • Reviews
  • Downloads
  • Images
  • LED Strip Light Guide

Product Information

Dual Data Signal External 8-pin SK6813 RGBIC Great Wall Shape Bendable LED Strip Light, compatible with DC12V and DC24V power input. Great Wall Strip Light is especially suitable for illuminated letter channel lighting and other signage advertising lighting, with flexible circuit board design, able to adapt to a variety of bending needs. The use of the dual-wire SK6813 makes this Great Wall RGB Strip addressable and programmable, and the color and brightness of the LEDs can be precisely adjusted to achieve rich color effects and dynamic lighting effects.

Since there is no stock of this Great Wall-type PCB board material, at least 500 meters of the light strip are required for production. If your order quantity is less than 500 meters, we will charge a customization fee of US$50 (one customization fee per order).

 

DC12V type: one external SK6813 IC controls 3 5050 RGB LEDs, 3 lights as a single pixel changed area; 50mm/2" cut length; 100 pixels per roll. 

DC24V type: one external SK6813 IC controls 6 5050 RGB LEDs, 6 lights as a single pixel changed area; 100mm/4" cut length; 50 pixels per roll. 

 

Product Specification

LED Strip Type:  Great Wall Shape LED Strip Light
LED Chip:  SK6813 Breakpoint Resume + SMD5050 RGB LED
Input Voltage:  DC12V, DC24V
Power:  8W/m, 40W/roll
LED Color:  Addressable RGB
PCB Width:  12mm/0.47"
LED Quantity:  60 LEDs/m
Cut Unit:  DC12V - 3 LEDs, 50mm/2", DC24V - 6 LEDs, 100mm/4"
IC Pixel:  DC12V - 20 pixels/m, DC24V - 10 pixels/m
Waterproof Rating:  Non-waterproof IP20
Beam Angle:  120°
Lifespan: 50,000+hours

 

4-Pin Breakpoint Resume Addressable LED Light Strip Wiring Diagram: 

how to connect ws2813 ws2815 led strip

 

Applications

  1. Advertasing lighting

  2. Signboard lighting

  3. Channel letter lighting

Bendable individually addressable great wall led strip

External SK6813 RGBIC Great Wall Shape Bendable LED Strip Light

Reviews

Customer Experience

Your feedback is important to us! Share your thoughts and photos with other customers.

Downloads

Files for GW-SK6813-RGB-60
Need this page for a project file or an engineering check? Click Open PDF, then save or print it from your browser. For CAD drawings, IES files or a signed test report, contact our engineers and quote the model number.

Images

These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

External SK6813 RGBIC Great Wall Shape Bendable LED Strip LightExternal SK6813 RGBIC Great Wall Shape Bendable LED Strip Light

LED Strip Light Guide

Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.

Which controller does this LED strip light need?
Addressable LED strip lights take a data signal, so they need an SPI (pixel) controller that supports this IC — an ordinary RGB controller will not drive them. Data flows one way: connect the controller to the input end marked with the arrow. Wiring addressable LED strip lights
Do I need power injection?
This model runs on DC12V · DC24V. 5 V addressable LED strip lights lose voltage fastest, so longer runs need power fed in at both ends and at intervals along the run; 12 V and 24 V versions carry further. Keep the data line short between controller and first pixel. Choosing an addressable LED strip light
Which waterproof rating should I choose?
Available on this model: Non-Waterproof IP20 - Adhesive Back. IP20 is for dry indoor use, IP65 handles splashes, IP67 suits outdoor and wet areas, IP68 is for continuous submersion. Choosing a waterproof rating
Can I cut it to length?
Yes. Cut only on the marked cut lines between the copper pads — the cut interval for this model is on its spec sheet. Rejoin with solder or a solderless connector. Cutting LED strip lights · we can also cut to length and fit your connector before shipping: custom LED strip light assembly.
What size power supply do I need?
Take the watts per metre from the specification above, multiply by the length you are running, then add about 25% headroom. Power calculation guide · Choosing a power supply
Will it fit an aluminium profile, and how dense are the LEDs?
PCB width 12mm (0.47in). Choose a profile whose inner width is at least the PCB width; denser LEDs give a smoother line close to a diffuser. LED aluminium profiles
Complete your setup
Picked for this model from items in stock.