WS2814 24V High Density 5050 Addressable RGBW LED Strip Lights 720 LEDs

This is an RGBW addressable LED strip controlled by WS2814 IC, operating at a low voltage of 24V. There are 144 LED chips across each meter, 720 LED chips per reel. (5m/16.4ft) High density ensures a bright and even RGBW LED lighting, with various dynamic lighting modes. One WS2814 IC controls 6 LED chips, so there are 24 ICs per meter. Each IC controls a segment that can also be cut, and the smallest cut unit is 42mm / 1.65in. Using scissors and connectors, you can cut or extend this 24V addressable RGBW LED strip to get customized length.

This WS2814 LED strip has a 12mm (0.47in) wide flexible board, with an adhesive backing for quick and stable installation. You can fold this digital RGBW LED strip to fit curved surfaces and illuminate edges of round tables. The signal transmission is single-ended. If you want to customize the illumination pattern, you can program this RGBW pixel LED tape light using the latest WLED WiFi controller. Within the 5050 SMDs, there is a blend of RGB beads (the white part of the LED chips) and white light beads (the yellow part of the LED chips) to help with more natural color mixing. The white light color temperature is selectable among 3000K warm white, 4000K natural white and 6500K cool white, solving the drawback of RGB's inability to emit pure white light.

WS2814 RGBW LED strip addressable adopts a reasonable LED chip layout, which ensures the luminous quality and at the same time helps the RGB W tape LED strip lights to dissipate heat better. If you want faster heat dissipation, you can install it into an aluminum channel. If you're looking for a more even glow, check out this LED COB strip light, also controlled by WS2814, with higher density but longer cutting units.

Features

1. 24V Addressable RGBW LED tape light, optional color temperatures including 3000K, 4000K, and 6500K.

2. WS2814 external IC, 24 ICs per meter, 120 ICs per reel. (5m/16.4ft)

3. Three wires for sending data: one V+ pin, one GND pin, and one data pin.

4. 5050SMD, high density of 144 LED chips per meter, 720 LED chips per reel. (5m/16.4ft)

5. Every 6 LED chips can be cut with scissors, the smallest cutting length is 42mm / 1.65in.

6. 12mm (0.47in) wide FPC, with adhesive backing for stable and quick installation.

Kit Products: 16.4ft WS2814 RGBW COB LED Tape Light + LRS-150-24 power supply (with an AC plug) + CONFULL-SP639E controller (without remote controll).

Standards and Certifications

Product Specification

How to Wire Addressable RGBW LED Strip?