12V Individually Addressable DMX LED RGBW Strip Lights 40LEDs/m

Model: DMXRGBW-UCS512H4L-IA40 Review stars 0.0 (0 Reviews) Various options in stock
Starting at: A$178.16
Qty Discounts Off Price
1-4
A$178.16		 5-9
A$175.49		 10-19
A$174.60		 20+
A$172.81
* Discounts may vary based on options below
Select Specifications:
Select PCB Width:
Select Length:
Qty: -+
Free shipping over $299Ships via DHL / UPSWarranty covered

Accept the project customization, please contact us for commercial offers and technical support.

  • Product Information
  • Reviews
  • Downloads
  • Images
  • LED Strip Light Guide

Product Information

Check our new 12V individually addressable DMX led strip RGBW with external 10-pin UCS512H4L DMX512 RGBW IC control, 40 5050 LEDs per meter. Each LED of this DMX RGBW strip is separately addressable, giving you individual control over its color and brightness for a high degree of lighting customization.

 

Individually Addressable DMX LED Strip Versus

Compared to the other individual addressable DMX RGBW led tape DCFLS-DMX512-5VX160, this one is upgraded to 12VDC, making it compatible with more DMX lighting projects. And compared to the individual addressable RGB DMX led tape DCFLS-DMX512-12VX300, this strip with 4-in-1 RGBW LEDs offers better color mixing and more color options.

 

DMX512 IC Chip UCS512H4L Datasheet PDF

 

Product Specifications

Item Type:  12V Individually Addressable DMX LED RGBW Strip Lights
LED Chip:  SMD5050 + 10-pin UCS512H4L IC
Input Voltage:  DC12V
Power:  15W/m, 75W/Roll
Working Temperature:  -20℃~+45℃
Storage Temperature:  -20℃~+60℃
LED Color Temperature:  Addressable RGB+3000K/4000K/6000K
PCB Width:  10mm/0.4"
LED Quantity:  40 LEDs/m, 200 LEDs per roll
IC Quantity:  40 ICs/m, 200 ICs/roll (1 pixel controls 1 LED)
Cut Unit:  25mm/1in - 1 LED can be cut
Waterproof Rating:  Non-waterproof IP20, Indoor Waterproof IP65, Outdoor Waterproof IP67 IP68
Strip Length:  5m/16.4ft
LED Chip:  Sanan
Lifespan: 50,000+hours
Beam Angle:  120°
Lumen:  22-24 lm/LED

 

How To Wire 5 Pin DMX RGBW LED Strip?

1. Through ArtNet controller to control DMX led strips:

t-300k led controller wiring diagram

2. Through programmable led controller to control DMX led strip: 

K-1000C led controller wiring diagram

 

Reviews

Customer Experience

Your feedback is important to us! Share your thoughts and photos with other customers.

Write a Review & Upload Photos

Downloads

Files for DMXRGBW-UCS512H4L-IA40
PDFDMXRGBW-UCS512H4L-IA40 product data sheetFull specifications, dimensions, cut points, wiring and IP options — the same details shown on this page, laid out for printing and engineering review.PDF · generated from the current product page · opens in a new tabOpen PDF
Need this page for a project file or an engineering check? Click Open PDF, then save or print it from your browser. For CAD drawings, IES files or a signed test report, contact our engineers and quote the model number.

Images

These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

12V Individually Addressable DMX LED RGBW Strip Lights 40LEDs/m

LED Strip Light Guide

Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.

Which controller does this LED strip light need?
Addressable LED strip lights take a data signal, so they need an SPI (pixel) controller that supports this IC — an ordinary RGB controller will not drive them. Data flows one way: connect the controller to the input end marked with the arrow. Wiring addressable LED strip lights
Do I need power injection?
5 V addressable LED strip lights lose voltage fastest, so longer runs need power fed in at both ends and at intervals along the run; 12 V and 24 V versions carry further. Keep the data line short between controller and first pixel. Choosing an addressable LED strip light
Which waterproof rating should I choose?
Available on this model: Underwater IP68 - Adhesive Back · Outdoor Silicone Tube IP67 - With Brackets · Surface Glued IP65 - Adhesive Back · Non-Waterproof IP20 - Adhesive Back. IP20 is for dry indoor use, IP65 handles splashes, IP67 suits outdoor and wet areas, IP68 is for continuous submersion. Choosing a waterproof rating
Can I cut it to length?
Yes. Cut only on the marked cut lines between the copper pads — the cut interval for this model is on its spec sheet. Rejoin with solder or a solderless connector. Cutting LED strip lights · we can also cut to length and fit your connector before shipping: custom LED strip light assembly.
What size power supply do I need?
Take the watts per metre from the specification above, multiply by the length you are running, then add about 25% headroom. Power calculation guide · Choosing a power supply
Will it fit an aluminium profile, and how dense are the LEDs?
PCB width 10mm (0.39in). Choose a profile whose inner width is at least the PCB width; denser LEDs give a smoother line close to a diffuser. LED aluminium profiles
Complete your setup
Picked for this model from items in stock.