Related Products
Tick the accessories you need and add them in one go
A$123.55
A$104.87
A$66.07A$80.4718% off
A$14.34A$22.9638% off
A$11.47
A$21.53
Product Information
This DC12V addressable LED strip pairs SMD3535 LEDs with the built-in 2814 IC to deliver programmable 6000-6500K daylight white illumination across an ultra-narrow 8mm white PCB. Engineered with break-point resume transmission, the backup signal line ensures that a single failed LED does not interrupt downstream communication. Running at 10W/m with 96 LEDs/m, it generates dense, uniform light output. It integrates directly into WS2814 ecosystem, providing individual pixel-level sequencing for architectural niches, gaming setups, and stage production displays.
Key Features
WS2814 Break-Point Resume
Dual-signal data lines permit continuous transmission so downstream 12V pixels remain operational even if one LED chip fails.
96 LEDs per Meter
High component density on an 8mm PCB produces smooth daylight running-water and chasing effects with minimal dark spacing.
Compact 8mm PCB Width
Narrow circuit board geometry fits into standard and slim aluminum channels without edge pinching.
Advanced Controller Pairing
Pairs directly with an external WS2814-compatible addressable white LED controller for custom color palettes and dynamic programming.
Product Specifications
| Parameter | Details |
|---|---|
| Model SKU | WS2814-DW-12V-96W8 |
| Operating Voltage | 12V DC |
| LED Chip Type | SMD3535 |
| LED Density | 96 LEDs/m |
| Total LED Count | 480 LEDs per 5m reel |
| IC Protocol | WS2814 (Breakpoint Resume Transmission) |
| Color Configuration | 6000-6500K Daylight White |
| Color Rendering Index (CRI) | Ra 80+ |
| Power Consumption | 10W/m (50W per 5m reel) |
| PCB Width | 8mm |
| PCB Color | White |
| Reel Length | 5m (16.4ft) |
| Ingress Protection | IP20 Non-waterproof / IP67 Tube Waterproof options |
| Beam Angle | 120 degrees |
| Signal Wiring | VCC (+12V), GND, Data (DI), Backup Data (BI) |
Application Scenarios
How to Install & Use This LED Strip
- Check controller data protocol compatibility and identify wire terminals: +12V (Red), GND (White/Black), Data (Green), and Backup Data (Blue).
- Connect the LED strip to a 12V DC power supply and pixel driver, and power on briefly to test signal continuity and pixel color order.
- Cut only along designated copper solder pads using sharp shears if shortening is necessary for the layout.
- Peel back the protective tape backing and press the LED strip firmly onto the substrate for 30 seconds along the entire run.
- Inject DC12V power at both ends of the run if daisy-chaining multiple reels to avoid end-of-line voltage drop.
What's in the Box
- ✓1 x 5-meter (16.4ft) Reel of 12V WS2814 Daylight LED Strip Light
- ✓2 x 4-Pin JST-SM Connector (Pre-soldered on input and output ends)
Frequently Asked Questions
Q: What is the benefit of the WS2814 break-point resume IC?
A:The WS2814 IC incorporates dual-channel data lines (DI and BI). If an individual LED chip or driver circuit fails, the backup signal pathway bypasses the broken unit so downstream pixels continue operating normally.
Q: What power supply is required for a 5-meter reel?
A:The strip consumes 10W per meter, totaling 50W for 5 meters. A 12V DC constant-voltage power supply rated for at least 60W is required to supply sufficient 20% operating headroom.
Q: Is this WS2814 LED strip dimmable?
A:Yes, brightness and individual color levels are fully dimmable from 0% to 100% via compatible SPI and digital pixel controllers.
Q: Can I connect multiple 5m reels end-to-end?
A:Data signals can travel across multiple reels, but 12V DC power must be injected every 5 meters to prevent voltage drop and dimming toward the far end of the installation.
Reviews
Customer Experience
Your feedback is important to us! Share your thoughts and photos with other customers.
Downloads
Files for WS2814-DW-12V-96W8Images
These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!
LED Strip Light Guide
Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.
