24V FW1935 Dual Data Signal 5050 RGB Addressable LED Strip, 84LEDs/m, 96LEDs/m

Name: 24V FW1935 Dual Data Signal 5050 RGB Addressable LED Strip, 84LEDs/m, 96LEDs/m
Brand: SuperLightingLED
SKU: DCFLS-24V-FW1935X420
Price: 33.98 GBP
Availability: InStock

Model: DCFLS-24V-FW1935X420 Review stars

0.0 (0 Reviews) Various options in stock

Starting at: £25.78

Qty Discounts Off Price
1-24 £25.78	25-49 £25.27	50-99 £24.49	100+ £23.46
* Discounts may vary based on options below

Select Specifications:

Select Kit:

Select Length:

16.4ft (5 meters)

Select Waterproof Rating:

Select LED Quantity:

Qty: -+

Free shipping over $299Ships via DHL / UPSWarranty covered

Accept the project customization, please contact us for commercial offers and technical support.

Product Information

High-density 84LEDs/m and 96LEDs/m digital RGB led strip for more uniform bright linear lighting with 1000 Hz high PWM output frequency and 800K Hz data transmission rate. Dual data wire transmission like WS2813 and WS2815, the control signal will not affect the normal operation of other SMD LEDs due to the abnormality of one SMD LED, and the serial data transmission rate is 800KHz.

Six LED diodes as a unit, one FW1935 IC controls 6 lights per time, each IC area with 256 brightness displays and 24-bit color displays. Pixel led strip must be connected to an SPI controller to achieve color changes. If you choose the kit, you'll get a X7 WiFi music controller.

This RGB strip comes with a 4-pin JST connector and a 2-pin power/ground wire at both ends, easy to connect multiple strips together, and inject power in time to run longer distances. Work with 24V led power supply (LRS-150-24 power in the kit).

If you need LED channel or silicone diffuser tube to cover your strip light, please purchase separately.

WS2815 12V addressable led strip lights

FW1935 RGB Datasheet Download

Product Specifications

LED Strip Type:	Addressable RGB LED Strip Lights
LED Chip:	FW1935 Breakpoint Resume + SMD5050
Input Voltage:	DC24V
Power:	16W/m - 84EDs/m, 18W/m - 96LEDs/m
LED Color Temperature:	Addressable RGB
PCB Width:	84LEDs/m - IP20/65 10mm/0.4", IP67/68 12mm/0.47", 96LEDs/m - IP20/65 12mm/0.47", IP67/68 14mm/0.55"
LED Quantity:	84/96 LEDs/m, 420/480 LEDs per 5m roll
IC Quantity:	14/16 IC/meter (1 IC drives 6 leds)
Cuttable:	6-LED, 71.4mm/2.8" - 84LEDs/m, 62.5mm/2.46" - 96LEDs/m
Waterproof Rating:	Non-waterproof IP20 / Indoor waterproof IP65 / Outdoor Waterproof IP67 IP68
Working Temperature:	-20℃~+45℃
Beam Angle:	120°

4 Pin Breakpoint Resume LED Strip Light Wiring

"24V+" to "VCC", data line "Di/Do" to "DAT", backup date line "Fi/Fo" to "DAT" to "GND", "GND" to "GND".

24V High Density 5050 RGB Addressable LED Strip Light

Reviews

Customer Experience

Your feedback is important to us! Share your thoughts and photos with other customers.

Write a Review & Upload Photos

Downloads

Files for DCFLS-24V-FW1935X420

PDFDCFLS-24V-FW1935X420 product data sheetFull specifications, dimensions, cut points, wiring and IP options — the same details shown on this page, laid out for printing and engineering review.PDF · generated from the current product page · opens in a new tabOpen PDF

Need this page for a project file or an engineering check? Click Open PDF, then save or print it from your browser. For CAD drawings, IES files or a signed test report, contact our engineers and quote the model number.

Images

These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

LED Strip Light Guide

Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.

Which controller does this LED strip light need?

Addressable LED strip lights take a data signal, so they need an SPI (pixel) controller that supports this IC — an ordinary RGB controller will not drive them. Data flows one way: connect the controller to the input end marked with the arrow. Wiring addressable LED strip lights

Do I need power injection?

5 V addressable LED strip lights lose voltage fastest, so longer runs need power fed in at both ends and at intervals along the run; 12 V and 24 V versions carry further. Keep the data line short between controller and first pixel. Choosing an addressable LED strip light

Which waterproof rating should I choose?

Available on this model: Underwater IP68 - Adhesive Back · Surface Glued IP65 - Adhesive Back · Outdoor Silicone Tube IP67 - Adhesive Back · Non-Waterproof IP20 - Adhesive Back. IP20 is for dry indoor use, IP65 handles splashes, IP67 suits outdoor and wet areas, IP68 is for continuous submersion. Choosing a waterproof rating

Can I cut it to length?

Yes. Cut only on the marked cut lines between the copper pads — the cut interval for this model is on its spec sheet. Rejoin with solder or a solderless connector. Cutting LED strip lights · we can also cut to length and fit your connector before shipping: custom LED strip light assembly.

What size power supply do I need?

Take the watts per metre from the specification above, multiply by the length you are running, then add about 25% headroom. Power calculation guide · Choosing a power supply

Will it fit an aluminium profile, and how dense are the LEDs?

LED density 84LEDs/m - 10mm · 96LEDs/m - 12mm. Choose a profile whose inner width is at least the PCB width; denser LEDs give a smoother line close to a diffuser. LED aluminium profiles

Complete your setup

Picked for this model from items in stock.

Often bought with this itemFrom real orders placed in the last 24 months

DC5-24V SP108E WiFi LED Addressable RGB SPI Pixel Controller, DIY Mode…£16.69

DC5/12/24V, SP105E New Style Dream Color LED Bluetooth Controller Cont…£9.85