Related Products
Tick the accessories you need and add them in one go
Can.$70.58
Can.$57.87
Can.$25.39
Can.$52.22Can.$55.085% off
Can.$32.45
Can.$23.98
Can.$12.70Can.$15.5218% off
Product Information
SuperLightingLED 2026 New 24V WS2815 RGB LED Strip is engineered for demanding, long-run digital lighting applications. By operating at 24V, this strip dramatically reduces voltage drop, enabling you to power a continuous 10-meter (32.8ft) length from a single end with virtually no color or brightness degradation. Each of the 60 high-performance 5050 SMD LEDs per meter is individually addressable, giving you pixel-perfect control for sophisticated animations and color effects.
The integrated WS2815 IC includes a crucial breakpoint resume feature and dual-signal wires, ensuring your installation remains operational even if a single LED fails. This makes the WS2815 LED strip an exceptionally reliable choice for architectural accents, large-scale signage, and immersive entertainment environments where performance and durability are paramount.
Key Features
24V for Extended Run Length
Power up to 10 meters (32.8ft) from a single power supply, minimizing wiring and ensuring consistent brightness across the entire strip.
Individually Addressable Pixels
Each LED acts as a single pixel, allowing for complete control to create dynamic chases, gradients, and custom lighting animations.
Dual-Signal Redundancy
Features both a Data (DI) and a Backup (BI) line, providing an extra layer of signal reliability for mission-critical installations.
Technical Highlights
- Operates at a stable DC 24V, significantly reducing voltage drop for runs up to 10 meters.
- Features built-in WS2815 ICs, allowing for individual control of each of the 60 pixels per meter.
- Redundant dual-signal design with data (DI) and backup (BI) lines enhances signal integrity.
- Compatible with a wide range of addressable LED controllers that support the WS2815 protocol, including Arduino, T-1000S, and SP-series controllers.
Product Specifications
| Parameter | Details |
|---|---|
| Product Model | WS2815-24V-RGB-5050X60 |
| Input Voltage | DC 24V |
| IC Type | WS2815 (Built-in) |
| Power Consumption | 14.4 Watts per meter |
| LED Type | SMD 5050 RGB |
| LED Density | 60 LEDs per meter |
| Pixel Density | 60 pixels per meter |
| PCB Width | 10mm |
| PCB Color Options | White / Black |
| Reel Length Options | 5 meters (16.4ft) / 10 meters (32.8ft) |
| Cutting Interval | Every 1 LED (approx. 16.67mm) |
| IP Rating | IP20 Non-Waterproof (IP65/IP67/IP68 available) |
| Greyscale Level | 256 levels |
| Beam Angle | 120° |
| Signal Protocol | WS2815 (Dual Signal: DI, BI) |
| Operating Temperature | -20°C to +50°C |
| Lead Time (Excluding Shipping) | Approx. 1 Week |
| Warranty | 2 Years |
Application Scenarios
How to Install & Use This LED Strip
- Measure your required length and carefully cut the strip at the designated copper cut lines located between each LED.
- Connect the strip's 4-pin connector to a compatible WS2815 controller and a 24V DC power supply. Ensure polarity (+24V, DI, BI, GND) is correct. Both DI and BI are connected to the controller's DAT port.
- Before final installation, power on the strip briefly to test functionality and color accuracy.
- For a professional, dot-free appearance in visible areas, consider installing the strip inside a silicone neon diffuser or aluminum channel.
- Always use a regulated DC 24V power source. Do not connect directly to 120V/220V AC.
- Ensure your power supply wattage is at least 20% greater than the total wattage of the strip length you are using. We recommend a DC24V UL-listed power supply for safety and reliability.
- While 10m runs are possible, do not exceed this length in a single series. For longer runs, inject power in parallel.
- Do not operate the strip while tightly coiled on the reel for extended periods, as this can cause overheating.
Power Consumption Reference
| Length | Power | Recommended Driver |
|---|---|---|
| 1m (3.3ft) | 14.4W | DC 24V, >18W (e.g., 24V 1A) |
| 5m (16.4ft) | 72W | DC 24V, >86W (e.g., 24V 100W) |
| 10m (32.8ft) | 144W | DC 24V, >173W (e.g., 24V 200W) |
What's in the Box
- ✓1 x Reel of 24V WS2815 RGB Individually Addressable LED Strip Light (5m or 10m)
Frequently Asked Questions
Q: Can this WS2815 LED strip be cut to a custom length?
A:Yes, this strip can be cut between any two LEDs at the designated copper pads. This gives you a very fine cutting interval of approximately 16.67mm.
Q: What is the maximum length I can run from a single power source?
A:Thanks to its 24V design, you can power a continuous 10-meter (32.8ft) length from one end with minimal voltage drop. For runs longer than 10 meters, you must inject power in parallel to maintain consistent brightness.
Q: Why should I choose this 24V WS2815 strip over a 12V or 5V version?
A:The primary advantage of 24V is the significant reduction in voltage drop. This allows for much longer single-ended power runs (up to 10m) and more stable performance, which is critical for large installations and professional projects.
Reviews
Customer Experience
Your feedback is important to us! Share your thoughts and photos with other customers.
Downloads
Files for WS2815-24V-RGB-5050X60Images
These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!
LED Strip Light Guide
Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.
Customers who bought this product also purchased...
Scroll for more →
