12V 10mm Addressable RGBW 5050 WS2815 LED Pixel Strip 150LEDs

Name: 12V 10mm Addressable RGBW 5050 WS2815 LED Pixel Strip 150LEDs
Brand: SuperLightingLED
SKU: WS2815-12V-RGBW-5050X30
Price: 30.98 CAD
Availability: InStock

Model: WS2815-12V-RGBW-5050X30 Review stars

0.0 (0 Reviews) Various options in stock

Starting at: Can.$52.22 Can.$43.7516% off

Qty Discounts Off Price
1-19 Can.$43.75	20-49 Can.$42.87	50-99 Can.$42.00	100+ Can.$41.12
* Discounts may vary based on options below

Select Specifications:

Select Kit:

Select Light Color :

Select PCB Color :

Select Length:

16.4ft (5 meters)

Select Waterproof Rating:

Qty: -+

Free shipping over $299Ships via DHL / UPSWarranty covered

Accept the project customization, please contact us for commercial offers and technical support.

Product Information

Important Notes for Waterproof WS2815 RGBW: If you select IP65 or IP68 ratings, the white light color temperature will change, 4000K will become 5000K and 4500-5000K will become 5500-6000K.

Our 2025 cutting-edge addressable RGBW LED strip uses the WS2815 IC to control 5050 high-brightness LED chips. It supports precise control over color, brightness and dynamic lighting effects of each individual LED.

Our 12v RGBW addressable LED strip has 30 LEDs per meter, with 150 LEDs per roll. The low-density arrangement supports the LEDs to produce more subtle lighting effects.

The Ws2815 IC features a break-point resume function, ensuring the entire lighting system working smoothly. Each ws2815 IC control one 5050 LED, enabling various animation, including color fade, chasing, blinking, breathing effect, etc. The four RGBW channels offer a wide range of colors and pure white color for user to choose. You can use an RGBW SPI LED controller to adjust the color and animation of thism letest RGBW individually addressable LED strip. With its rich dynamic lighting effects, this WS2815 led strip is perfect for advertising, signage, commercial and residential illumination.

In addition, each LED can be individually cut at 33.3mm/1.31’’ interval, making it flexible to adapt to various installations. The PCB width is 10mm, enabling it to be set into the aluminum channels (inner width ≥10mm). Paired with aluminum channel, this WS2815 12v led strip can create dynamic linear lighting.

Please note that the spare signal wire (BI-BO) of this LED strip cannot be connected to the negative pole. Please connect both signal wires of the light strip to the signal output of the controller.

You can also choose the CS8812 RGBW type as an economical option.

Feature

1. Each WS2815 IC control one 5050 LED, RGBW color individually addressable.

2. Density of 30 LEDs per meter, 150 LEDs per roll.

3. individually cuttable, can be cut every 33.3mm/1.31’’.

4. IP20, IP65, IP67 and IP68 waterproof ratings available, perfect as smart rgbic outdoor lights

LED Strips + Controller: 16.4ft LED Strip + SPIR3 led controller kit (include C6 RF remote)

LED Strips + Controller + Power Supply: 16.4ft LED Strip + SPIR3 led controller kit + LRS-75-12 + AC Plug

If you need lighting accessories, please click here to buy. For waterproof power supply, click here.

WS2815 5050 Individually Controllable LED Strip Lights Specifications Download

WS2815 Chips Specifications Download

Product Specification

LED Strip Type:	10mm WS2815 5050 RGBW LED Strip Light 30LEDs/m
LED Chip:	5050 SMD
Input Voltage(V):	12VDC
Length:	16.4ft/roll, every LED (33.3mm/1.31’’) can be cut
LED Quantity:	30 LEDs/m/3.28ft, 150 LEDs/16.4ft
IC Quantity:	30 pixels/m/3.28ft, 150 pixels/m/16.4ft
Working Power:	7.2w/M/3.28ft, 36w/16.4ft Max
LED Color:	Addressable RGB + 4000K/6000K
PCB Width:	10mm/0.39''
Waterproof Rating:	Non-waterproof IP20, Waterproof IP65/IP67/IP68
IC Type:	WS2815 IC
CRI:	85+
Lumen:	72.2LM/W, 520LM/M, 2600LM/Roll

Reviews

Customer Experience

Your feedback is important to us! Share your thoughts and photos with other customers.

Write a Review & Upload Photos

Downloads

Files for WS2815-12V-RGBW-5050X30

PDFWS2815-12V-RGBW-5050X30 product data sheetFull specifications, dimensions, cut points, wiring and IP options — the same details shown on this page, laid out for printing and engineering review.PDF · generated from the current product page · opens in a new tabOpen PDF

Need this page for a project file or an engineering check? Click Open PDF, then save or print it from your browser. For CAD drawings, IES files or a signed test report, contact our engineers and quote the model number.

Images

These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

LED Strip Light Guide

Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.

Which controller does this LED strip light need?

Addressable LED strip lights take a data signal, so they need an SPI (pixel) controller that supports this IC — an ordinary RGB controller will not drive them. Data flows one way: connect the controller to the input end marked with the arrow. Wiring addressable LED strip lights

Do I need power injection?

5 V addressable LED strip lights lose voltage fastest, so longer runs need power fed in at both ends and at intervals along the run; 12 V and 24 V versions carry further. Keep the data line short between controller and first pixel. Choosing an addressable LED strip light

Which waterproof rating should I choose?

Available on this model: Underwater IP68 - Adhesive Back · Outdoor Silicone Tube IP67 - Adhesive Back · Surface Glued IP65 - Adhesive Back · Non-Waterproof IP20 - Adhesive Back. IP20 is for dry indoor use, IP65 handles splashes, IP67 suits outdoor and wet areas, IP68 is for continuous submersion. Choosing a waterproof rating

Can I cut it to length?

Yes. Cut only on the marked cut lines between the copper pads — the cut interval for this model is on its spec sheet. Rejoin with solder or a solderless connector. Cutting LED strip lights · we can also cut to length and fit your connector before shipping: custom LED strip light assembly.

What size power supply do I need?

Take the watts per metre from the specification above, multiply by the length you are running, then add about 25% headroom. Power calculation guide · Choosing a power supply

Complete your setup

Picked for this model from items in stock.

Often bought with this itemFrom real orders placed in the last 24 months