5V SK6812 144 1-Meter Digital Dim to Warm to Bright WWA LED Strip

Name: 5V SK6812 144 1-Meter Digital Dim to Warm to Bright WWA LED Strip
Brand: SuperLightingLED
SKU: SK6812-144-5050SMD-WWA
Price: 20.98 GBP
Availability: InStock

Model: SK6812-144-5050SMD-WWA Review stars

0.0 (0 Reviews) Various options in stock

Starting at: £15.92

Qty Discounts Off Price
1-49 £15.92	50-99 £15.60	100-199 £15.12	200+ £14.49
* Discounts may vary based on options below

Select Specifications:

Select PCB Width:

12mm (0.47in)

Select PCB Color :

Select Length:

3.28ft (1 meter)

Select Waterproof Rating:

Qty: -+

Free shipping over $299Ships via DHL / UPSWarranty covered

Accept the project customization, please contact us for commercial offers and technical support.

Product Information

This high density 144LEDs/m 5V SK6812 WWA led light tape comes with 2-in-1 color temperature LEDs that can demonstrate static color temperature changes from dim 1800K-2000K amber light to warm light to 6000K-6500K cool white light. Combined with SK6812 IC chip control, each color temperature LED on this WWA strip can be individually controlled to program a wide variety of dynamic color temperature displays. The low voltage DC 5V voltage input makes it ideal for a variety of small decorative and DIY projects to provide ambience to your creations.

SK6812 WWA LED Datasheet Download

Product Specifications

LED Strip Type:	5V SK6812 144 1-Meter WWA LED Strip
LED Chip:	SK6812 + SMD5050
Input Voltage:	DC5V
Power:	28.8W/m, 1m/3.28ft per roll
LED Color Temperature:	1800-2000K amber to 6000K-6500K white
PCB Width:	12mm/0.47"
LED Quantity:	144 LEDs/m, 144 LEDs per roll
IC Quantity:	144 ICs/m, 144 ICs per roll (1 IC drivers 1 LED)
Cut Unit:	1-LED, 6.94mm/0.27"
Waterproof Rating:	Non-waterproof IP20, Indoor waterproof IP65, Outdoor waterproof IP67
Dimensions:	L100cm(39.3 in ) x W1.2cm(0.47 in ) x H0.3cm(0.12 in )
CRI:	85+
Beam Angle:	120°

How to connect and control

SK6812 WWA led strip lights should be connected to a digital SPI/TL controller that compatible with SK6812 protocol to change or program LED color effects. Powered by 5VDC power supply. Comes with a 3-pin JST connector and a 2-pin power wire at the ends, easy connection.

The BLACK ARROWS on the strip tells the signal transmitting direction. If connected oppositely, the strip will not work.

SK6812 hookup:

addressable SK6812 led strip wiring diagram

5V SK6812 144 1-Meter Digital Dim to Warm to Bright WWA LED Strip

Reviews

Customer Experience

Your feedback is important to us! Share your thoughts and photos with other customers.

Write a Review & Upload Photos

Downloads

Files for SK6812-144-5050SMD-WWA

PDFSK6812-144-5050SMD-WWA product data sheetFull specifications, dimensions, cut points, wiring and IP options — the same details shown on this page, laid out for printing and engineering review.PDF · generated from the current product page · opens in a new tabOpen PDF

Need this page for a project file or an engineering check? Click Open PDF, then save or print it from your browser. For CAD drawings, IES files or a signed test report, contact our engineers and quote the model number.

Images

These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

LED Strip Light Guide

Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.

Which controller does this LED strip light need?

Addressable LED strip lights take a data signal, so they need an SPI (pixel) controller that supports this IC — an ordinary RGB controller will not drive them. Data flows one way: connect the controller to the input end marked with the arrow. Wiring addressable LED strip lights

Do I need power injection?

5 V addressable LED strip lights lose voltage fastest, so longer runs need power fed in at both ends and at intervals along the run; 12 V and 24 V versions carry further. Keep the data line short between controller and first pixel. Choosing an addressable LED strip light

Which waterproof rating should I choose?

Available on this model: Outdoor Silicone Tube IP67 - With Brackets · Surface Glued IP65 - Adhesive Back · Non-Waterproof IP20 - Adhesive Back. IP20 is for dry indoor use, IP65 handles splashes, IP67 suits outdoor and wet areas, IP68 is for continuous submersion. Choosing a waterproof rating

Can I cut it to length?

Yes. Cut only on the marked cut lines between the copper pads — the cut interval for this model is on its spec sheet. Rejoin with solder or a solderless connector. Cutting LED strip lights · we can also cut to length and fit your connector before shipping: custom LED strip light assembly.

What size power supply do I need?

Take the watts per metre from the specification above, multiply by the length you are running, then add about 25% headroom. Power calculation guide · Choosing a power supply

Will it fit an aluminium profile, and how dense are the LEDs?

PCB width 12mm (0.47in). Choose a profile whose inner width is at least the PCB width; denser LEDs give a smoother line close to a diffuser. LED aluminium profiles

Complete your setup

Picked for this model from items in stock.

Often bought with this itemFrom real orders placed in the last 24 months