Flexible Color Changing RGB COB LED Strip Lighting - DC12/24V Input - 16.4Ft 800LEDs

This COB RGB LED strip light is a new type of dotted COB LED strip light. It is to cure the LED light-emitting chip directly on the flexible FPC board, and then directly cover the wick with fluorescent glue. Compared with traditional LED strips, it is constantly updated in LED density and lighting brightness, and decreasing the cost.

This COB LED strip light is packaged and integrated with 150LEDs COB chips per meter. The LED chip has high density and small size, which perfectly solves the problems of poor heat dissipation of high-density LED strips and provides sustainable time for COB LED strips.

Compared with ordinary SMD LED light strips, it is greatly flexible and can be bent at any angle. It supports a 180-degree lighting angle, parallel light-emitting, three-dimensional light perception, suitable for under cabinets lighting, and high-quality 3M tape is attached to the back, which is easy to install.

Using safe input voltage, when the voltage is lower than 36V, it is harmless to the human body. This RGB COB LED strip supports DC12/24V input voltage, DC12V 5-7m without voltage drop; DC24V 10m without voltage drop. For outdoor lighting, develop an IP67 waterproof kit.

RGB mixing can produce 16 million colors, a single static lighting color can be realized by matching the color changing RGB LED controller, suitable for decorative lighting.

Standards and Certifications

Product Specification

How to choose LED strip lights kit?

You can choose the controller or power supply or controller plus power option for this COB LED strip. Of course, only the COB LED light is also completely possible. The difference is whether you need to control the LED brightness change of the COB strip and whether you can supply power to the light strip.

In the following table, we list for you which products you will get if you choose the kit. If you have other needs, please check our product categories.

Wiring Diagram: How to Wire RGB Color Changing LED Strip Lights?

What is the difference between COB LED and SMD LED strip light?

1.180-degree light-emitting angle can cover a large range of lighting areas and provide easy lighting for complex environments

2.Good flexibility, LED chips are closely arranged and can be bent at any angle

3.The whole roll almost without spot light, lighting smooth.

What is the difference between white and RGB COB LED light strip?