Long 2 Pin Bi Color LED SMD2835 CCT Changing 8mm Black Board Tape Light 10M

This long-run Full Spectrum 24V led tape light brings a new CCT color temperature cool and warm adjustable lighting solution for kitchen, living room, and home outdoors. The 10-meter 32.8-feet / 20-meter 65.6-feet strip length reduces the hassle of complicated wiring for CCT tunable lighting projects and simplifies the installation process. 

This black board tape light features a two-in-one dual-color design that combines 2700K warm white and 6500K cool white light in the same 2835 SMD LED, and with an ultra-high density of 180 bi-color led lights per meter, it delivers a very bright and even lighting effect, whether you are adjusting the light to cool white or warm white.

It is important to note that this bi-color led strip uses 2-wire CCT dimmable white technology, which requires the use of a dedicated 2-wire CCT controller for light control. In the kit we offer the LC2-RF model with C1 remote control, if you would like to combine motion sensing or push switches with this tunable white lighting, please check out the Skydance RF CCT controller series, which can be paired with additional wireless sensors to trigger the warm and cool lights.

Product Features

• The spacing between each two bi-color LEDs is only 5.55mm, which provides high linear light uniformity. 

• 24V input provides good consistency for each color temperature light display over a 10m even 20m length. 

• Black PCB reduces the effect of reflections on the color temperature of the light, providing a pure white light. 

• Small PCB width of 8mm allows for hidden light in cabinets, skirting boards, staircase steps and other applications.

• One roll of 10 meters CCT consumes only 160 watts and needs to be used with a 24 volt DC power supply such as the LRS-200-24 Model in the kit.

Product Specification