Related Products
Tick the accessories you need and add them in one go
$16.98
$146.00
$13.98
$21.98$26.9819% off
$17.98
$6.99$7.9913% off
$11.98
Product Information
This 24V Tunable White LED Strip Light offers exceptional control over your lighting environment, allowing seamless adjustment from a cozy 2700K warm white to a crisp 6500K cool white. Featuring a high density of 132 SMD 2835 LEDs per meter on a narrow 8mm PCB, it produces a smooth, uniform line of light with minimal spotting, making it ideal for installations where the strip itself may be visible.
This product is designed for professionals seeking precise color temperature control. It's perfect for creating both functional task lighting and cozy ambient scenes. Each unit is a single 5-meter (16.4ft) roll, providing ample length for significant projects.
Key Features
Dynamic CCT Adjustment
Smoothly transition between 2700K warm white and 6500K cool white to match the mood or time of day.
High-Density & Uniform Light
With 132 LEDs per meter, this strip light minimizes hotspots for a clean, continuous line of light.
Narrow 8mm PCB
The slim 8mm width allows for installation in tight spaces and low-profile aluminum channels.
Efficient 24V DC Power
Operates on 24V for longer maximum run lengths with less voltage drop compared to 12V systems.
Cuttable for Custom Lengths
Can be cut at marked intervals to perfectly fit the length of your project requirements.
Simple Installation
Features an adhesive backing for a secure peel-and-stick installation on clean, dry surfaces.
Technical Highlights
- 2-in-1 SMD 2835 Chip: Each LED chip contains both a warm white and a cool white diode, enabling superior color mixing and a more consistent light output across the CCT range.
- 3-Wire Design: Utilizes a common anode (+24V) and separate channels for warm white (WW) and cool white (CW), ensuring compatibility with a wide range of CCT controllers.
- High Efficacy: Delivers up to 1980 lumens per meter while consuming only 24 watts, providing a balance of high brightness and energy efficiency.
Product Specifications
| Parameter | Details |
|---|---|
| Product Model | FSLSR-24V-2700-2835 |
| Input Voltage | DC 24V |
| Power Consumption | 24 W/meter (7.3 W/ft) |
| Total Power (5m Roll) | 120 Watts |
| Color Temperature (CCT) | Tunable 2700K to 6500K |
| Luminous Flux | Approx. 1980 lm/meter (603 lm/ft) |
| Total Luminous Flux (5m Roll) | Approx. 9900 lumens |
| Color Rendering Index (CRI) | Ra > 80 |
| LED Type | SMD 2835 |
| LED Quantity | 132 LEDs/meter |
| Beam Angle | 120° |
| PCB Width | 8mm |
| PCB Color | White |
| Reel Length | 5 meters (16.4 feet) |
| Cut Interval | Every 45.45mm/1.79in (6 LEDs) |
| IP Rating | IP20 (Non-Waterproof), IP67 (Silicone Housing) |
| Dimming | Yes, with a 3-wire CCT controller |
Application Scenarios
How to Install & Use This LED Strip
- 1. Surface Preparation: Thoroughly clean the mounting surface with isopropyl alcohol to remove any dust, oil, or residue. Ensure the surface is completely dry before proceeding.
- 2. Measure and Cut: Measure the required length and cut the LED strip only on the designated copper cut marks. Cutting anywhere else will damage the circuit.
- 3. Connect to Controller & Power: Connect the 3 wires from the LED strip to a compatible CCT controller (+24V, WW, CW). Then, connect the controller to a 24V DC power supply.
- 4. Pre-Installation Test: Before peeling the adhesive backing, power on the strip to test its functionality. Verify that you can control both brightness and the full range of color temperatures.
- 5. Peel and Stick: Carefully peel the protective layer off the 3M adhesive backing. Firmly press the LED strip onto the prepared surface, holding for 15-30 seconds to ensure a strong bond.
⚠ Precautions
- Ensure your 24V DC power supply has at least 20% wattage overhead. For a full 5m roll (120W), a power supply of 144W or greater is required.
- Do not exceed the maximum run length of 5 meters in a single series. For longer runs, power the strip from both ends or run parallel power feeds to prevent voltage drop.
What's in the Box
- ✓1 x 5-meter (16.4ft) Roll of Tunable White LED Strip Light
Frequently Asked Questions
Q: Is this LED strip dimmable?
A:Yes, it is fully dimmable. However, you must use a compatible CCT (Correlated Color Temperature) controller or dimmer. It is not dimmable with standard single-color or AC dimmers.
Q: What kind of power supply do I need for a full 5-meter roll?
A:The full 5-meter roll consumes 120 Watts (24W/m x 5m). We recommend a 24V DC power supply with a capacity of at least 144 Watts (120W x 1.2) to ensure stable performance and longevity. For the full 5-meter roll, we recommend a high-quality 24V power supply with at least 144W, like our MeanWell UL indoor power supplies.
Q: How do I control the color temperature and brightness?
A:You need a 3-channel (V+, WW, CW) CCT LED controller. It is fully dimmable when paired with appropriate dual white CCT LED dimmers, which will allow you to adjust both the brightness level and the color temperature from warm white to cool white.
Q: Why choose an 8mm PCB width?
A:The narrower 8mm PCB is advantageous for fitting into slim, low-profile aluminum extrusion channels or tight architectural spaces where standard 10mm or 12mm strips are too wide.
Reviews
Customer Experience
Your feedback is important to us! Share your thoughts and photos with other customers.
Downloads
Files for CCT-2835-2IN1-132W8Images
These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!
LED Strip Light Guide
Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.
