2-in-1 Bi Color White LED Tape

These 2-wire CCT light strips use specialized internal circuitry. The two wires have no distinction between positive and negative; each wire carries a specific color temperature and must be connected to a dedicated 2-wire CCT controller such as the V2-S to seamlessly adjust the LED’s CCT color temperature.

Yes, they are highly compatible when paired with the correct dimmable LED driver. To use a Lutron or other brand TRIAC or ELV wall dimmer, you must connect it to a compatible AC-input dimmable power supply. The driver converts the wall dimmer's signal into the clean DC power the strip needs. Never wire an AC wall dimmer directly to a low-voltage DC LED strip.

Absolutely. Since the dimming and CCT change is controlled by voltage, you simply need a controller that can modulate the 24V DC output. We stock a wide range of Dual White Color CT LED Dimmers and single-channel controllers that speak Zigbee 3.0, DALI, and other protocols. You connect the controller between your power supply and the 2-wire strip, allowing full integration into systems like Philips Hue, Tuya, or professional DALI lighting networks.

Yes, this is a core part of our business for commercial clients. A large portion of what we ship is built to customer drawings. You can send us your lighting plan or even a simple sketch with dimensions. Our engineers will create a wiring diagram and quote for pre-cut strips, with specific lead wire lengths and connectors pre-soldered in our facility. This saves significant on-site labor and ensures consistency. We typically return a full proposal within 12 hours with no consultation fee or obligation to order.

For most of our 24V dim-to-warm strips, the maximum recommended single-ended run is 5 meters (16.4 feet). For longer runs, you must power the strip from both ends or use multiple parallel runs back to the power supply to avoid visible dimming and color shifting at the far end. Some of our specialized long-run strips can go up to 10 or 20 meters, but always check the product's specific datasheet for its maximum run length.

Dim-to-warm is exceptionally well-suited for relaxation areas like bedrooms, living rooms, and restaurants where you want bright, functional light during the day and a very warm, cozy 'sunset' glow in the evening. While it can be used in a kitchen, a standard Warm And Cool White LED Strip often provides more flexibility for task lighting, as it allows you to have high brightness at any color temperature, not just the coolest one.

You should wire multiple strips to a single power supply in parallel, not in series (end-to-end). This means running separate pairs of positive and negative wires from each strip segment back to the driver's output terminals. You can use terminal blocks or wire nuts to consolidate the connections. This prevents voltage drop across the combined length and ensures every strip dims uniformly. We offer various 2-Pin Single Color LED Strips Parts to make these parallel connections clean and secure.

No, it does not. In fact, dimming an LED generally increases its operational lifespan. LEDs degrade faster at higher temperatures, and dimming them reduces both the current and the heat generated. The CCT shifting mechanism in these strips is managed by gentle voltage reduction, which is not stressful to the LED components. Like all our strips, they are rated for 50,000+ hours of operation.