SK6813 DC12V Narrow Individually Addressable Zig Zag RGB LED Tape Light

This SK6813 LED strip is just 6mm wide, pre-applied with 3M adhesive backing. Featuring a zigzag design, the narrow RGB addressable LED tape can be bent at a sharper angle, perfect for complex shapes, 3D signage, and lettering lighting. With a high density of 84 LED chips per meter, the strip’s length can be customized: every 3 LEDs is cuttable with scissors.

Each LED chip is embedded with an SK6813IC for fine control. This bendable zig zag LED strip is equipped with a BAK signal line, which can be transmitted continuously at breakpoints and is highly stable. SK6813 IC has a high refresh rate and usually operates at a voltage of 5V. In order to realize long-distance lighting, we use a 12V circuit board with external step-down circuits to ensure that the IC works under 5V voltage. Therefore, please use a 12V transformer for power supply.

Since this LED multi color changing tape light is an SMD version, light spots are unavoidable. If you prefer a spotless lighting effect, please consider using an aluminum channel or a neon tube to better disperse the light, or consider addressable COB light strips.

If select kit, you will receive SP530E LED controller and LRS-100-12 power supply with an AC plug. There is a slight voltage drop at the end of 5m/16.4ft when powered from one end.

Features 

1. Zigzag design, more flexible.

2. Integrated SK6813 IC, individually addressable.

3. Dual signal line, more stable.

4. 12V input voltage for longer linear lighting.

5. 3M adhesive backing equipped.

Product Specification

4-pin dual signal SK6813 RGB LED strip wiring diagram: