12V 8mm 480LEDs 5050 LED RGB Strip 5m Per Roll

Model: RGB-5050-480W8-12V Review stars 0.0 (0 Reviews) Various options in stock
Starting at: £12.89
Qty Discounts Off Price
1-19
£12.89
20-99
£12.63
100-199
£12.38
200+
£11.86
* Discounts may vary based on options below
Select Specifications:
Select Length:
Qty: -+
Free shipping over $299Ships via DHL / UPSWarranty covered

Accept the project customization, please contact us for commercial offers and technical support.

  • Product Information
  • Reviews
  • Downloads
  • Images
  • LED Strip Light Guide

Product Information

RGB 5050 led strip lights are the most common choice of RGB strip lights. Our this 5050 led RGB strip is designed to have 480 5050 RGB LEDs on a 5-meter long 8mm wide circuit board. Every two 5050 RGB LEDs are very close to each other. This high density LED design of 96 lights per meter makes the RGB led strip glow more evenly than its similar type 72LEDs/m VL5050RGB-360W8-24V.

This 8mm 5050 led strip RGB color performance is good with no color difference over the 5m length, suitable for most home room lighitng projects.

DC12V low voltage input, every three LEDs can be cut with 31.25mm (1.23") per cut section. The 5050 RGB led strip light comes with 4pin male and female pin connectors on both ends, making it easy to connect multiple rolls or to an RGB controller.

We offer Tuya 5-in-1 WIFI-BT-WB5 controller and 96W 8A power adapter as a kit to facilitate your choice.

 

Note: If you want to use RGB connectors to connect the solder joints, please make sure the size of the connectors match this RGB tape light.

 

Product Specification

LED Strip Type: 5050 LED RGB Strip
LED Chip: SMD5050
Light Color: RGB
Input Voltage:  12VDC
LED Quantity: 96 LEDs per meter, 29 LEDs/ft
Cut Unit:  3 LEDs, 31.25mm/1.23"
Dimensions: Length 5000mm(16.4ft), Width 8mm(0.3"), Height 2mm
Beam Pattern: 120 degrees
Working Power: 14.4W/m, 72W/roll max.
Lifespan: 50,000+hours
Waterproof Rating: Non-Waterproof indoor IP20, outdoor waterproof IP67

 

5050 led rgb strip wiring diaram

12V 8mm 480LEDs 5050 LED RGB Strip 5m Per Roll

12V 8mm 480LEDs 5050 LED RGB Strip 5m Per Roll

Reviews

Customer Experience

Your feedback is important to us! Share your thoughts and photos with other customers.

Downloads

Files for RGB-5050-480W8-12V
Need this page for a project file or an engineering check? Click Open PDF, then save or print it from your browser. For CAD drawings, IES files or a signed test report, contact our engineers and quote the model number.

Images

These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

12V 8mm 480LEDs 5050 LED RGB Strip 5m Per Roll12V 8mm 480LEDs 5050 LED RGB Strip 5m Per Roll12V 8mm 480LEDs 5050 LED RGB Strip 5m Per Roll12V 8mm 480LEDs 5050 LED RGB Strip 5m Per Roll12V 8mm 480LEDs 5050 LED RGB Strip 5m Per Roll12V 8mm 480LEDs 5050 LED RGB Strip 5m Per Roll12V 8mm 480LEDs 5050 LED RGB Strip 5m Per Roll

LED Strip Light Guide

Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.

Which controller does it need?
Colour-changing LED strip lights need a controller with one output per colour channel — for this model that is a 4-pin RGB controller at the same voltage. Choosing a controller
Which waterproof rating should I choose?
Available on this model: Outdoor Silicone Tube IP67 - Adhesive Back · Outdoor Silicone Tube IP67 - With Brackets · Non-Waterproof IP20 - Adhesive Back. IP20 is for dry indoor use, IP65 handles splashes, IP67 suits outdoor and wet areas, IP68 is for continuous submersion. Choosing a waterproof rating
Can I cut it to length?
Yes. Cut only on the marked cut lines between the copper pads — the cut interval for this model is on its spec sheet. Rejoin with solder or a solderless connector. Cutting LED strip lights · we can also cut to length and fit your connector before shipping: custom LED strip light assembly.
What size power supply do I need?
Take the watts per metre from the specification above, multiply by the length you are running, then add about 25% headroom. Power calculation guide · Choosing a power supply
Complete your setup
Picked for this model from items in stock.

Customers who bought this product also purchased...

Scroll for more →