Related Products
Tick the accessories you need and add them in one go
Can.$52.22
Can.$43.75
Can.$25.39
Can.$42.34Can.$45.196% off
Can.$14.09
Can.$1.40
Can.$1.40
Product Information
COB kelvin color temperature tuning LED strip lights ushering in a new design for 2025, SuperLightingLED has increased the number of light chips on board to a tightly packed 840 beads per meter (256 per foot). This innovation not only significantly increases the brightness of the cob lights, but also results in finer light distribution and more even illumination. More chips on the strip represent higher brightness visible to the naked eye, bringing a comfortable variation of warm and cool tones to your bedroom and home space.
Normally the solder joints of light strips are designed to be visible on the PCB board, this bright CCT light strip hides the solder joints on the backside, leaving only the necessary LED devices on the surface to stabilize the operation. This design enhances the aesthetics of the led strip and also reduces the scattering and reflection of light, minimizing possible failures due to exposed solder joints.
Use smart PW2 wireless controller, C3 CCT remote, and LRS-150-24 power supply to drive the 24V DC cob lights led tunable white strip.
|
Warm Notice For Used With Aluminum Profiles: Since the solder joints of this light strip are located on the back of the PCB, after soldering the light strip, the solder joints must not come into direct contact with the aluminum profile, as this could cause LED short circuits. Therefore, please cover the solder joints with an insulating film to ensure normal LED operation. If you have any suggestions or feedback regarding this design in practical applications, please feel free to share them with us. |
840 COB CCT Product Features
• 2700K and 6500K LED chips are covered by high translucent silicone for high light quality
• 10mm wide gold-plated electrolytic circuit board, oxidation resistance, high temperature resistance
• Extremely high flexibility to resist PCB rupture in bending process
• 180 degree light-emitting angle, light efficiency up to 1500-1700LM/M, 100-120LM/W
• 24V low voltage drive, 20W per meter (6.1W per foot) power consumption
• Cutting lines are visible on the cob strip and can be cut every 50mm (1.97in)
Product Specifications
| LED Strip Type: | COB Bright CCT Warm Cool Color Tuning LED Strip Aesthetics |
| Beam Angle: | 180° |
| Input Voltage: | DC24V |
| Power: | 20W/m, 6.1W/ft, 100W/roll max |
| LED Color: | Tunable White, 2700-6500 Kelvin color temp |
| PCB Width: | 10mm/0.4" for IP20, 12mm/0.47" for IP67 and IP68 |
| LED Quantity: | 840 Chips/m, 256 Chips/ft, 4200 Chips/roll |
| Length: | 5m/16.4ft |
| Cuttable: | 50mm/1.97" |
| Waterproof Rating: | Non-waterproof IP20, Waterproof IP67, Underwater IP68 |
| CRI: | Ra 90+ (High) |
| Lumen: | 1500-1700lm/m, 100-120lm/W |
| Outlet Cable: | 3-pin wires at both ends |
Reviews
Customer Experience
Your feedback is important to us! Share your thoughts and photos with other customers.
Downloads
Files for FCOB-CCT-840W10-24VImages
These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!
LED Strip Light Guide
Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.
3-Pin COB Press Fit Piercing Connectors For LED Light StripsCan.$1.40
COB 3 Pin LED Strip Connector For 10mm CCT Dimmable LED Strip LightsCan.$1.38
DC24V RGBCCT COB LED Strip Light with Thicker Encapsulation CoatingCan.$43.75
DC24V Smart RGBCCT COB LED Strip Addressable Flexible Dotless LightCan.$57.87
Customers who bought this product also purchased...
Scroll for more →
