24V SMD4040 DMX RGBW UCS512 LED Strip 100LEDs/m, Max 20m 65ft

The UCS512 4040 RGBW LED Strip for engineering and commercial DMX lighting systems is a high-performance DMX lighting solution that can reach up to 20 meters (65.6 feet) operating distance. This UCS512 led strip uses SMD4040 as the carrier for the 4-in-1 RGBW color changing light source. Each LED pixel has four color channels of red, green, blue, and white (RGBW) for a wider range of color combinations and richer color effects.

DMX RGBW LED Strip utilizes the standard DMX512 control protocol and the UCS512H4LB IC chips, which is compatible with a variety of DMX controllers for precise control and programming of RGBW LED light addresses. And its high LED density of 100 lights per meter provides a delicate color effect. Dual signal data transmission (A and B) with 5pin JST quick connectors on both ends of the DMX512 RGBW light strip.

• 24V voltage system, up to 20m/65.6ft a strip, perfect choice for engineering series and commercial series DMX RGBW lighting systems

• SMD4040 DMX RGBW four-channel design, rich lighting options, 65536 levels of grayscale

• 100 LEDs per meter density, 10 UCS512H4LB ICs per meter (or 96 LEDs per meter, 16 UCS512H4LB ICs per meter)

• 5-pin dual data signals, continue transmission at breakpoints

• Standard DMX UCS512H4LB chip control, compatible with various DMX controllers

• Match our 12mm PCB neon tubes for outdoor exterior use and optimize LED lighting effects

For convenient setup and operation, we offer complete control kits tailored to different strip lengths. Each kit includes the MIBoxer SPIB5 Bluetooth Tuya Mini DMX Controller (no remotes) for wireless control via smartphone and seamless integration with smart home systems. The 5-meter kit pairs the controller (50 pixels) with an LRS-150-24 power supply, while the 10-meter kit (100 pixels) uses an LRS-350-24 to accommodate higher power demands.

Please note that each SPIB5 controller can handle a maximum of 240 watts via inline connection. Since both 15-meter (150 pixels) and 20-meter (200 pixels) configurations would exceed this power rating, we do not offer complete kits for these lengths to ensure optimal performance and safety. For longer installations, we recommend using multiple controller units with separate power supplies.