DC24V Flexible S-Type DMX Pixel RGBW Shapeable LED Strip

Model: DMXRGBW-UCS512-S Review stars 0.0 (0 Reviews) Various options in stock
Starting at: £35.65
Qty Discounts Off Price
1-9
£35.65		 10-49
£35.11		 50-99
£34.94		 100+
£34.58
* Discounts may vary based on options below
Select Specifications:
Select PCB Width:
Select Length:
Select LED Quantity:
Qty: -+
Free shipping over $299Ships via DHL / UPSWarranty covered

Accept the project customization, please contact us for commercial offers and technical support.

  • Product Information
  • Reviews
  • Downloads
  • Images
  • LED Strip Light Guide

Product Information

DMX512 S-Type Pixel LED Strip

Flexible Zigzag PCB for Shapeable Architectural & Signage Lighting

When illuminated advertising signage needs to interact, synchronize, or animate in coordination with other lighting systems, a standard RGB LED strip is no longer enough. This is where DMX pixel-level control becomes essential.

Designed with a flexible S-type (zigzag) PCB, this DMX512 pixel LED strip allows smooth bending in both horizontal and vertical directions, making it ideal for curved advertising signs, channel letters, dynamic architectural outlines, and creative lighting installations. 

In bar, club, and entertainment venues, it pairs perfectly with bendable recessed aluminum profiles to create flowing, animated lighting lines that follow complex architectural forms.

 

Product Features

Every 6 LEDs form an independent circuit, and each 100mm/3.93" segment functions as an individual pixel, allowing you to program lighting effects through a DMX controller.

Direct DMX signal input, 10 pixels per meter. 

Low-voltage 24-volt drive, suitable for various commercial projects.

Comes standard in 5-meter rolls and can be cut at the marked black cut lines located at the solder pads.

5-pin JST-SM male and female connectors are pre-installed on both ends for easy DMX signal and power connection.

 

Product Specifications

LED System:  Addressable LED Strip Lighting
Brand:  SuperLightingLED
Item Type:  Flexible S-Type Shapeable DMX Pixel LED Strip
LED Chip:  SMD5050
IC Chip:  UCS512C1L (RGBW), TM512ACE (RGB)
Driven:  DMX directly control (DMX signal)
Input Voltage:  DC24V
Power: 
18.7W/m @RGBW, 15.8W/m @RGB
Length:  5m/16.4ft
PCB Width: 
12mm
LED Quantity:  60 LEDs/m
IC Quantity: 
10 ICs/m (1 IC controls 6 LED lights), 50 per roll
Cut Unit: 
100mm/3.93in, 6 LEDs can be cut
Waterproof Rating:  Non-waterproof IP20, Splash-proof IP54
Installation:  Adhesive backing
Solder Joints:  24V+, Pi/Po (DMX addresses), A (DMX signal 1), B (DMX signal 2), GND
Outlet Cable:  JST SM female male 5-pin connectors + 2-pin power connectors

 

Reviews

Customer Experience

Your feedback is important to us! Share your thoughts and photos with other customers.

Write a Review & Upload Photos

Downloads

Files for DMXRGBW-UCS512-S
PDFDMXRGBW-UCS512-S product data sheetFull specifications, dimensions, cut points, wiring and IP options — the same details shown on this page, laid out for printing and engineering review.PDF · generated from the current product page · opens in a new tabOpen PDF
Need this page for a project file or an engineering check? Click Open PDF, then save or print it from your browser. For CAD drawings, IES files or a signed test report, contact our engineers and quote the model number.

Images

These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

DC24V Flexible S-Type DMX Pixel RGBW Shapeable LED Strip

LED Strip Light Guide

Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.

Which controller does this LED strip light need?
Addressable LED strip lights take a data signal, so they need an SPI (pixel) controller that supports this IC — an ordinary RGB controller will not drive them. Data flows one way: connect the controller to the input end marked with the arrow. Wiring addressable LED strip lights
Do I need power injection?
5 V addressable LED strip lights lose voltage fastest, so longer runs need power fed in at both ends and at intervals along the run; 12 V and 24 V versions carry further. Keep the data line short between controller and first pixel. Choosing an addressable LED strip light
Which waterproof rating should I choose?
Available on this model: IP54 For Damp Environments · IP20 Non-Waterproof. IP20 is for dry indoor use, IP65 handles splashes, IP67 suits outdoor and wet areas, IP68 is for continuous submersion. Choosing a waterproof rating
Can I cut it to length?
Yes. Cut only on the marked cut lines between the copper pads — the cut interval for this model is on its spec sheet. Rejoin with solder or a solderless connector. Cutting LED strip lights · we can also cut to length and fit your connector before shipping: custom LED strip light assembly.
What size power supply do I need?
Take the watts per metre from the specification above, multiply by the length you are running, then add about 25% headroom. Power calculation guide · Choosing a power supply
Will it fit an aluminium profile, and how dense are the LEDs?
PCB width 12mm (0.47in) · LED density 60 LEDs/m (10 Pixels/m). Choose a profile whose inner width is at least the PCB width; denser LEDs give a smoother line close to a diffuser. LED aluminium profiles
Complete your setup
Picked for this model from items in stock.