SK6812 RGB 60LEDS/M DC12V 10MM-Wide Digital Intelligent Addressable LED Strip Lights - 5m/16.4ft per roll

Model: SK6812-RGB-60W10-12V Review stars 0.0 (0 Reviews) Various options in stock
Starting at: £37.17
Qty Discounts Off Price
60-4
£37.17
5-9
£36.42
10-14
£35.31
15+
£33.82
* Discounts may vary based on options below
Select Specifications:
Qty: -+Min:  60
*Mixed OFF
Free shipping over $299Ships via DHL / UPSWarranty covered

Accept the project customization, please contact us for commercial offers and technical support.

  • Product Information
  • Reviews
  • Downloads
  • Images
  • LED Strip Light Guide

Product Information

This built-in one-to-three SK6812 IC strip currently has no PCB inventory available. A minimum order quantity of 300 meters is required, plus a $100 customization fee. We recommend checking our 12V individually addressable model as an alternative. Or consider the similar RGBW model

There are 60 Addressable RGB LEDs per meter,  and 10mm wide for the 60LEDs/meter, DC 12V input, and every 3 LEDs can be cut! Yes, that's right, this is the digitally addressable type of LED strip. You can set the color of each LED's red, green, and blue component with 8-bit PWM precision (so 24-bit color per pixel). This strip comes as a single full meter with a 3-pin JST SM connector on each end. To power this strip, you need a 12V power supply.  

The LEDs are controlled by shift registers that are chained up down the strip so you can shorten or lengthen the strip. Only 1 digital output pin is required to send data down. The PWM is built into each LED chip so once you set the color you can stop talking to the strip and it will continue to PWM all the LEDs for you.

The SK6812 is very similar to the WS2812B, and it can be used as a drop-in replacement in most applications because it features the same interface and color order (so LED strips based on the SK6812 and WS2812B can be chained together). The main difference between the two drivers is that the SK6812 has voltage-independent color and brightness over a wide voltage range, which means that the colors of the LEDs should not be affected by a drop in the supply voltage as much as they are on the WS2812B.

 

SK6812 Chips Specifications Download   PDF  

 

Standards and Certifications

DC12V CE FCC RoHS ISA SGS ISO LIFETIME warranty waterproof

Specifications

Input Voltage:   DC12V

Power:   14.4watt/meter, 72watt/roll

LED Chip Model:   SMD 5050

LED resource:   SK6812 LED

IC Type:   SK6812 IC (1 IC drives 3 leds)

Q'ty of LED:    60 LEDs/Meter 

Q'ty of IC:   20 pixels /Meter

Cuttable:   every 3LEDs is cuttable

Dimensions:     L500cm(196.85 in ) x W1.0cm(0.39 in ) x H0.25cm(0.1 in )

Color Temp(K):   RGB full color

FPC color:   White

Protection rate:   Non-waterproof  or IP 65( gel coating) IP67 waterproof (sealed in silicone tube) 

Colors:   Full color RGB, dream color changing; 

Grey scale:   256

Bits/color:   8-bits/color;total 24bit for RGB color

LED wavelengths:   630nm/530nm/475nm

Average Life (hrs):   50000Hours+

 
 

 

Reviews

Customer Experience

Your feedback is important to us! Share your thoughts and photos with other customers.

Downloads

Files for SK6812-RGB-60W10-12V
Need this page for a project file or an engineering check? Click Open PDF, then save or print it from your browser. For CAD drawings, IES files or a signed test report, contact our engineers and quote the model number.

Images

These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

SK6812 RGB 60LEDS/M DC12V 10MM-Wide Digital Intelligent Addressable LED Strip Lights - 5m/16.4ft per rollSK6812 RGB 60LEDS/M DC12V 10MM-Wide Digital Intelligent Addressable LED Strip Lights - 5m/16.4ft per rollSK6812 RGB 60LEDS/M DC12V 10MM-Wide Digital Intelligent Addressable LED Strip Lights - 5m/16.4ft per rollSK6812 RGB 60LEDS/M DC12V 10MM-Wide Digital Intelligent Addressable LED Strip Lights - 5m/16.4ft per roll

LED Strip Light Guide

Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.

Which controller does this LED strip light need?
Addressable LED strip lights take a data signal, so they need an SPI (pixel) controller that supports this IC — an ordinary RGB controller will not drive them. Data flows one way: connect the controller to the input end marked with the arrow. Wiring addressable LED strip lights
Do I need power injection?
5 V addressable LED strip lights lose voltage fastest, so longer runs need power fed in at both ends and at intervals along the run; 12 V and 24 V versions carry further. Keep the data line short between controller and first pixel. Choosing an addressable LED strip light
Which waterproof rating should I choose?
Available on this model: Underwater IP68 - Adhesive Back · Outdoor Silicone Tube IP67 - With Brackets · Surface Glued IP65 - Adhesive Back · Non-Waterproof IP20 - Adhesive Back. IP20 is for dry indoor use, IP65 handles splashes, IP67 suits outdoor and wet areas, IP68 is for continuous submersion. Choosing a waterproof rating
Can I cut it to length?
Yes. Cut only on the marked cut lines between the copper pads — the cut interval for this model is on its spec sheet. Rejoin with solder or a solderless connector. Cutting LED strip lights · we can also cut to length and fit your connector before shipping: custom LED strip light assembly.
What size power supply do I need?
Take the watts per metre from the specification above, multiply by the length you are running, then add about 25% headroom. Power calculation guide · Choosing a power supply
Complete your setup
Picked for this model from items in stock.

Customers who bought this product also purchased...

Scroll for more →