SK6812 RGBW 60LEDS/M DC12V 10MM-Wide Digital Intelligent Addressable LED Strip Lights - 5m/16.4ft per roll

There are 60 Addressable RGBW LEDs per meter,  and 10mm wide for the 60LEDs/meter, DC 12V input, and every 3 LED can be cut! Yes, that's right, this is the digitally-addressable type of LED strip. You can set the color of each LED's red, green and blue component with 8-bit PWM precision (so 24-bit color per pixel).

The LEDs are controlled by shift-registers that are chained up down the strip so you can shorten or lengthen the strip.

Only 1 digital output pin is required to send data down.

The PWM is built into each LED-chip so once you set the color you can stop talking to the strip and it will continue to PWM all the LEDs for you.

The SK6812 is very similar to the WS2812B, and it can be used as a drop-in replacement in most applications because it features the same interface and color order (so LED strips based on the SK6812 and WS2812B can be chained together). The main difference between the two drivers is that the SK6812 has voltage-independent color and brightness over a wide voltage range, which means that the colors of the LEDs should not be affected by a drop in the supply voltage as much as they are on the WS2812B.

SK6812 Chips Specifications Download