SK6812 RGBW/WWA 144LEDS/M DC5V 12MM-Wide Digital Intelligent Addressable LED Strip Lights - 1m/3.28ft per roll

Model: SK6812-RGBW/WWA-144W12 Review stars 0.0 (0 Reviews) Various options in stock
Starting at: Can.$36.69 Can.$23.9835% off
Qty Discounts Off Price
1-19
Can.$23.98
20-49
Can.$23.50
50-99
Can.$23.02
100+
Can.$22.54
* Discounts may vary based on options below
Select Specifications:
Select Length:
Qty: -+
Free shipping over $299Ships via DHL / UPSWarranty covered

Accept the project customization, please contact us for commercial offers and technical support.

  • Product Information
  • Reviews
  • Downloads
  • Images
  • LED Strip Light Guide

Product Information

There are 144 Addressable RGBW/WWA LEDs per meter,  and 12mm wide for the 144LEDs/meter, DC5V input, and you can control each LED individually! Yes, that's right, this is the digitally-addressable type of LED strip. You can set the color of each LED's red, green and blue component with 8-bit PWM precision (so 24-bit color per pixel).

The LEDs are controlled by shift-registers that are chained up down the strip so you can shorten or lengthen the strip.

Only 1 digital output pin is required to send data down.

The PWM is built into each LED-chip so once you set the color you can stop talking to the strip and it will continue to PWM all the LEDs for you.

The SK6812 is very similar to the WS2812B, and it can be used as a drop-in replacement in most applications because it features the same interface and color order (so LED strips based on the SK6812 and WS2812B can be chained together). The main difference between the two drivers is that the SK6812 has voltage-independent color and brightness over a wide voltage range, which means that the colors of the LEDs should not be affected by a drop in the supply voltage as much as they are on the WS2812B.

SK6812 Chips Specifications Download   PDF  

 

Light strips advantages

arrow   With plasticity, can be free to bend the shape — fixed in the uneven surface, easy to install (using the 3M self-adhesive) and other advantages;

arrow   With waterproof, in case of high temperature and low temperature does not change color, low voltage long life, and other advantages;

arrow   With bright colors and soft light (1LED lights can be composed of a loop — every 1 light can be cut to use), energy saving and environmental protection and other advantages are the ideal replacement of neon products (than the neon energy saving 70%), It is decorative contours. Making a variety of modeling the ideal lighting.

 

Standards and Certifications

DC5V CE FCC RoHS ISA SGS ISO LIFETIME warranty waterproof

 

Specifications

Input voltage: DC5V

Power: 57.6watt/meter,57.6watt/roll

LED Chip Model: SMD5050

LED resource:  SK6812 LED

IC Type: SK6812IC (1 IC drives 1 led chip)

Q'ty of LED: 144leds/Meter Available

Q'ty of IC: 144 pixel /Meter

Cuttable: every LED is cuttable

Dimensions:  L100cm(39.4 in ) x W1.2cm(0.47 in ) x H0.25cm(0.1 in )

Color Temp(K): RGB full color

FPC color: WHITE/BLANK PCB

Protection rate: Non-waterproof  or IP 65( gel coating) IP67 waterproof (sealed in silicone tube) 

Colors: Full color RGB, dream color changing; 

Grey scale: 256

Bits/color: 8-bits/color;total 24bit for RGB color

LED wavelengths: 630nm/530nm/475nm

Average Life (hrs): 50000Hours+

 

How to connect and control

Similar to WS2812B LED strip, the SK2812 led strip has 3 wires for sending data - one V+ pin, one GND pin, and one data pin. That means you need 3 pins to control strip. Because the data is separated, you can use any processor speed or type to control these strips. an addressable RGB LED strip is a long flexible strand of LEDs each of which can be individually set to a certain color (hence: addressable). By varying the level of red, green and blue (RGB) per LED many color combinations can be made you can use any processor speed or type to control these strips, you can use any microcontroller or microprocessor, including Arduino, Raspberry Pi, BeagleBone, Propeller, SparkCore, and any 'raw' microcontrollers/microprocessors to control the strip. 

This strip comes as a single full meter with a 3-pin JST SM connector on each end. Every LEDs segment can be cut. Solder to the 0.1" copper pads and you're good to go.you can also connect strips together to make them longer. To power this strip, you need a 5V power supply.  

This is our recommended SPI and Programmable controller link. We are a professional lighting system company, you can tell us your lighting project requirements, we will recommend the most reasonable lighting solutions for you. If you need a customized lighting scheme, please feel free to contact me.

 

Waterproof Level Description

IP20 IP20 Non-waterproof (The PCB [Printed Circuit Board] surface of the bare, with a self-adhesive back, For Indoor);

IP65 IP65 Waterproof (Epoxy cover waterproof, PCB surface is encapsulated with plastic Gel, with self-adhesive 3M back, For Outdoor & Indoor);

IP67 IP67 Waterproof (Silicon sleeve waterproof, PCB is encapsulated with silicon tube, with a plastic fastener, better waterproof, For Outdoor);

 

 

Applications

These digital Addressable LED Strips are Applicable to people who would like to pursue fashion and romance, for individual creativity and the new apartment decoration, as its soft, light and thin features very suitable for DIY personal space.

LED programmable digital screen

Hotels decoration lighting

Backlighting decoration

Concealed lighting, Cove decoration

led wall, advertising board

Outdoor advertising signs,

Hotel, KTV, bars,

Wedding party lighting, 

digital rgb addressable led strip applications

Note

arrow The BLACK ARROWS on the strip tell the transmitting direction of the signal. When running more than one roll of the strip after the Dream Color Controller, the following rolls of Dream Color Strip should be run strictly follow the Arrow point direction. If connected oppositely, the strip will not work

arrow Electronic products to ensure that there will not be after-sales quality disputes, please use qualified manufacturers.

arrow LED lamp bead detection technology National leading: independent patent testing equipment in 3 minutes can be measured lamp light failure, color, life and other important electrical parameters, the machine dead light rate of fewer than one hundred thousandths, finished lamps Anti-static up to 20KV, the factory solemn commitment to light bar warranty for 2 years.

arrow Reduce more costs for customers: managers before the technical-based electronic components traders, the use of components without intermediate links, both genuine and inexpensive.

arrow Waterproof to achieve the highest IP68 level: independent waterproof patented technology. Outdoor products in the hottest Hainan Sanya, the coldest Shenyang, the factory’s fish tank all-weather two years to run, there is no water phenomenon.

arrow ISO9001 / 2 management model: to ensure that each product 100% qualified factory.

arrow Service-oriented: by the number of electrical professional technicians composed of the installation of the steering group, at any time to listen to customers dispatch. The products have been sold to the United States, Britain, Italy, India, Russia, Iran, Nigeria, Israel, and other countries and regions. The company through the CCC certification, CE certification, ROHS recognition, PCC, ISO9001, SGS, UL certification, and other domestic and international related industry certification.

 

Reviews

Customer Experience

Your feedback is important to us! Share your thoughts and photos with other customers.

Downloads

Files for SK6812-RGBW/WWA-144W12
Need this page for a project file or an engineering check? Click Open PDF, then save or print it from your browser. For CAD drawings, IES files or a signed test report, contact our engineers and quote the model number.

Images

These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

SK6812 RGBW/WWA 144LEDS/M DC5V 12MM-Wide Digital Intelligent Addressable LED Strip Lights - 1m/3.28ft per rollSK6812 RGBW/WWA 144LEDS/M DC5V 12MM-Wide Digital Intelligent Addressable LED Strip Lights - 1m/3.28ft per rollSK6812 RGBW/WWA 144LEDS/M DC5V 12MM-Wide Digital Intelligent Addressable LED Strip Lights - 1m/3.28ft per rollSK6812 RGBW/WWA 144LEDS/M DC5V 12MM-Wide Digital Intelligent Addressable LED Strip Lights - 1m/3.28ft per rollSK6812 RGBW/WWA 144LEDS/M DC5V 12MM-Wide Digital Intelligent Addressable LED Strip Lights - 1m/3.28ft per rollSK6812 RGBW/WWA 144LEDS/M DC5V 12MM-Wide Digital Intelligent Addressable LED Strip Lights - 1m/3.28ft per rollSK6812 RGBW/WWA 144LEDS/M DC5V 12MM-Wide Digital Intelligent Addressable LED Strip Lights - 1m/3.28ft per rollSK6812 RGBW/WWA 144LEDS/M DC5V 12MM-Wide Digital Intelligent Addressable LED Strip Lights - 1m/3.28ft per rollSK6812 RGBW/WWA 144LEDS/M DC5V 12MM-Wide Digital Intelligent Addressable LED Strip Lights - 1m/3.28ft per rollSK6812 RGBW/WWA 144LEDS/M DC5V 12MM-Wide Digital Intelligent Addressable LED Strip Lights - 1m/3.28ft per roll

LED Strip Light Guide

Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.

Which controller does this LED strip light need?
Addressable LED strip lights take a data signal, so they need an SPI (pixel) controller that supports this IC — an ordinary RGB controller will not drive them. Data flows one way: connect the controller to the input end marked with the arrow. Wiring addressable LED strip lights
Do I need power injection?
5 V addressable LED strip lights lose voltage fastest, so longer runs need power fed in at both ends and at intervals along the run; 12 V and 24 V versions carry further. Keep the data line short between controller and first pixel. Choosing an addressable LED strip light
Which waterproof rating should I choose?
Available on this model: Underwater IP68 - Adhesive Back · Outdoor Silicone Tube IP67 - With Brackets · Outdoor Silicone Tube IP67 - Adhesive Back · Surface Glued IP65 - Adhesive Back · Non-Waterproof IP20 - Adhesive Back. IP20 is for dry indoor use, IP65 handles splashes, IP67 suits outdoor and wet areas, IP68 is for continuous submersion. Choosing a waterproof rating
Can I cut it to length?
Yes. Cut only on the marked cut lines between the copper pads — the cut interval for this model is on its spec sheet. Rejoin with solder or a solderless connector. Cutting LED strip lights · we can also cut to length and fit your connector before shipping: custom LED strip light assembly.
What size power supply do I need?
Take the watts per metre from the specification above, multiply by the length you are running, then add about 25% headroom. Power calculation guide · Choosing a power supply
Complete your setup
Picked for this model from items in stock.

Customers who bought this product also purchased...

Scroll for more →