Related Products
Tick the accessories you need and add them in one go
€49.43
€36.19€92.7261% off
€52.96€59.1410% off
€55.61€66.2116% off
€63.56€68.868% off
€117.42
€34.42€44.1322% off
Product Information
This 24V addressable DMX RGB LED strip light delivers dynamic color changing using native DMX512 protocol, eliminating the need for intermediary decoders. Built with 60 SMD5050 RGB LEDs per meter inside an extrusion of solid silicone, this IP68 submersible LED strip light provides ingress protection for underwater fountains, pool perimeters, and harsh outdoor architectural facades. Each 100mm section contains 6 LEDs governed by an integrated DMX IC, consuming 3 DMX channels per addressable segment (10 pixels per meter). Discover our broader range of RGB DMX LED tape and integrate this model with our DMX control systems and an outdoor-rated 24V waterproof power supply for synchronized lighting displays.
Key Features
Solid Silicone IP68 Ingress Protection
Full solid silicone encapsulation protects against continuous submersion in water, chlorine exposure, and outdoor UV degradation.
Direct DMX512 Protocol Support
Communicates directly with standard DMX consoles and controllers without requiring separate external DMX signal decoders.
Segmented Pixel Control
Configured with 10 addressable pixel segments per meter, where each 100mm cut section operates across 3 discrete DMX channels (R, G, B).
24V DC Operating Voltage
Operates on 24V direct current to reduce electrical line resistance and minimize voltage drop over 5m and 10m continuous runs.
Multiple Connector Options
Supplied standard with a 5-pin JST-SM connector, with factory options for 5-core bare wire pigtails or threaded waterproof connectors.
Technical Highlights
- Solid silicone encapsulation forms a solid barrier without hollow air cavities, preventing internal condensation during thermal cycling.
- Equipped with self-adhesive backing along the 14mm base for immediate positioning prior to mechanical clip mounting in underwater environments.
- Compatible with programmable stage consoles, architectural DMX master controllers, and Madrix software setups.
- Provides 10 individual DMX control zones per meter (30 DMX addresses per meter) for smooth color chasers, sweeps, and video mapping.
Product Specifications
| Parameter | Details |
|---|---|
| Product SKU | DMXRGB-IP68-24V5050X60 |
| Working Voltage | DC 24V |
| Power Consumption | 14.4W per meter |
| LED Type | SMD5050 Tri-color RGB |
| LED Density | 60 LEDs per meter |
| Control Protocol | Standard DMX512 (differential signal) |
| Pixel Pitch / Resolution | 10 pixels per meter (1 IC per 6 LEDs) |
| DMX Channel Footprint | 3 channels per pixel (30 channels per meter) |
| Cut Interval | 100mm (3.94 inches) along designated solder pads |
| Ingress Protection Rating | IP68 (submersible in fresh and chlorinated water) |
| Encapsulation Material | Optical-grade solid silicone (UV-resistant) |
| Physical Dimensions | 14mm wide x 5mm high (0.55 in x 0.20 in) |
| Reel Lengths Available | 5 meters (16.4 ft) / 10 meters (32.8 ft) |
| Mounting Method | Integrated adhesive backing |
| Default Termination | 5-pin JST-SM connector (waterproof connector/wire optional) |
Application Scenarios
How to Install & Use This LED Strip
- Inspect the LED strip light and test color switching with your DMX512 controller and 24V DC power supply prior to field mounting.
- Cut only along the marked 100mm copper line intervals if sizing is required, and reseal all exposed cuts with neutral-cure silicone and end caps to retain the IP68 rating.
- Connect the 5-pin wiring: 24V DC (+), Ground (-), DMX Data+ (A), DMX Data- (B), and Signal Ground/Addressing line to your DMX driver terminal.
- Set starting DMX addresses via your hardware programmer or software patch list to assign channel universes correctly.
⚠ Precautions
- Do not exceed a continuous 10-meter single-ended power feed.
- Calculate total power demand and provide at least 20 percent spare driver wattage capacity (load should not exceed 80 percent of power supply rating).
Power Consumption Reference
| Length | Power | Recommended Driver |
|---|---|---|
| 1m (3.3 ft) | 14.4W | 24V 20W DC power supply |
| 5m (16.4 ft) | 72.0W | 24V 100W DC power supply |
| 10m (32.8 ft) | 144.0W | 24V 180W or 200W DC power supply (dual-end injection) |
What's in the Box
- ✓1 x Reel 24V DMX512 RGB LED strip light IP68 waterproof (5m or 10m based on selection)
- ✓1 x Factory-attached 5-pin input connector/wire
- ✓1 x Factory-attached 5-pin output connector/wire
Reviews
Customer Experience
Your feedback is important to us! Share your thoughts and photos with other customers.
Downloads
Files for DMXRGB-IP68-24V5050X60Images
These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!
LED Strip Light Guide
Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.
