Related Products
Tick the accessories you need and add them in one go- €29.12
- €57.38€70.6419% off
- €20.29
- €23.82
- €40.60€44.158% off
- €46.78€52.9612% off
- €28.25
Product Information
This long RGBW 24V LED tape uses onboard constant current ICs to deliver uniform illumination across continuous runs up to 15 meters (49.2ft) from a single 24V DC power feed with no visible voltage drop or color shift. Engineered with 60 SMD5050 4-in-1 chips per meter on a 12mm 2oz copper PCB, each meter consumes 15W while providing full color mixing and dedicated white output.
Designed for continuous perimeter accents, large architectural coves, and exterior facades, this LED strip avoids intermediate power injection points. Connect with an external RF RGB+CCT control system and pair with an indoor 24V Mean Well power supply or an outdoor-rated unit to maintain steady output across large installations.
Key Features
Constant Current Regulation
Onboard IC drivers maintain identical milliamp delivery to every diode across 15 meters without end-to-end brightness loss.
SMD5050 4-in-1 Diodes
Integrates red, green, blue, and true white diodes inside a single LED package for uniform color blending without multi-color shadowing.
15-Meter Single-Feed Run
Powers an entire 15m reel from one end, eliminating complex mid-circuit power feeds and messy parallel cabling.
2oz Pure Copper PCB
Features a 12mm wide flexible circuit board with double-thickness copper traces for reduced resistance and efficient thermal spread.
Dual-Ended 5-Wire Pigtails
Comes pre-wired with 5-conductor bare wire leads on both reel ends for streamlined electrical connection.
Four IP Protection Grades
Available in IP20 non-waterproof, IP65 spray-coated, IP67 hollow silicone tube, and IP68 solid silicone potting.
Technical Highlights
- Single-feed 15-meter run capability: Standard 24V LED strip lights show noticeable color shifting and lumen attenuation beyond 5 to 10 meters. Integrated constant current driver ICs regulate the operating current per cut segment, eliminating human-visible voltage drop from 0m to 15m.
- 2oz flexible copper circuitry: Double-layer 2-ounce electrolytic copper prevents overheating, limits circuit resistance, and increases structural durability when handling long linear installations.
- Precision white integration: Dedicated white emitter allows true neutral or warm white architectural illumination alongside saturated multi-color dynamic scenes.
Product Specifications
| Parameter | Details |
|---|---|
| Model SKU | FSLCCRGBW-24V-5050X60 |
| Working Voltage | DC 24V |
| Circuit Architecture | Constant Current IC Regulation |
| Power Consumption | 15W per meter (4.57W per foot) |
| LED Type | SMD5050 4-in-1 RGBW |
| LED Density | 60 LEDs per meter (18 LEDs per foot) |
| Reel Length Options | 5 meters (16.4ft), 10 meters (32.8ft), 15 meters (49.2ft) |
| Maximum Run Length | 15 meters (single end feed) |
| PCB Width | 12mm (0.47 in) |
| PCB Copper Thickness | 2oz flexible double-sided copper |
| PCB Color | White |
| Ingress Protection Options | IP20 / IP65 / IP67 / IP68 |
| Cut Interval | 100mm (3.94 in) / 6 LEDs per cut section |
| Connection Type | 5-conductor bare wire pigtails on both ends |
| Beam Angle | 120 degrees |
| Color Rendering Index (White) | CRI ≥ 90 |
| Operating Temperature | -20°C to +50°C (-4°F to 122°F) |
Application Scenarios
How to Install & Use This LED Strip
- Unroll the LED strip from the spool and connect the 5-conductor leads (+24V Black, R Red, G Green, B Blue, W White) to your controller to test full-color operation before final adherence.
- Measure the designated run length. If cutting is necessary, cut only along the marked copper solder lines spaced every 100mm.
- Peel back the adhesive liner gradually and press the LED strip firmly along the mounting surface, applying steady pressure for at least 30 seconds per section.
- Connect the 24V DC output terminals of your power supply to the RGBW controller, ensuring correct polarity and driver capacity.
⚠ Precautions
- Do not power this LED strip while coiled on the plastic reel for longer than 30 seconds; heat buildup will damage the PCB and components.
- Mounting inside an aluminum channel is required for 15W/m power loads to ensure sufficient heat dissipation.
- Always calculate power requirements with a minimum 20% safety margin when selecting a DC 24V power supply.
Power Consumption Reference
| Length | Power | Driver |
|---|---|---|
| 5 meters (16.4ft) | 75W | 24V 100W driver (e.g., LRS-100-24 or XLG-100-24) |
| 10 meters (32.8ft) | 150W | 24V 200W driver (e.g., LRS-200-24 or XLG-200-24) |
| 15 meters (49.2ft) | 225W | 24V 300W to 320W driver (e.g., LRS-350-24 or XLG-320-24) |
What's in the Box
- ✓1 × Selected Length Reel of 24V Constant Current RGBW LED Strip
- ✓Pre-attached 5-conductor bare wire pigtails on both ends of the reel
Frequently Asked Questions
Q: How does rgbw led strip light work?
A: An RGBW LED strip incorporates four individual color dies (Red, Green, Blue, and White) inside each SMD5050 package. By controlling the voltage level on each color channel, you can produce millions of mixed colors or run pure white illumination independently.
Q: How long can you run an rgbw 12v led strip vs this 24v constant current LED strip?
A: A standard 12V RGBW LED strip typically suffers visible voltage drop beyond 5 meters. This 24V LED strip uses constant current ICs to support uninterrupted single-feed runs up to 15 meters with zero lumen decay.
Reviews
Customer Experience
Your feedback is important to us! Share your thoughts and photos with other customers.
Downloads
Files for FSLCCRGBW-24V-5050X60Images
These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!



LED Strip Light Guide
Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.


















