Max 25m 82ft Long 36V Dual Data UCS1903 5050 Addressable RGB LED Strip Light

DC36V up to 25 meters long run distance single signal UCS1903 and dual data signal MT16703 high density 72 lights per meter 5050 addressable RGB led strip. 12mm wide 4 oz PCB board with UCS1903 or MT16703 IC chips external to the SMD LEDs. The 4 ounces of copper foil allows for good heat dissipation on the PCB board, helping to maintain a stable operating temperature for the pixel RGB LEDs.

The 36V voltage makes the UCS1903 or MT16703 RGB digital 5050 led strip more stable over long runs, reduces the possibility of voltage drops and signal degradation, and reduces wiring and circuit layout in light strip lighting projects.

This addressable single/dual signal UCS1903/MT16703 36V led strip has very good color illumination consistency, with virtually no voltage drop over 25 meters with power injected at one end, very good white light consistency at the first and last ends. 

Note: If ordering less than 100 meters in total, there is an additional $33 sample fee.

One UCS1903/MT16703 IC to control 9 LEDs (125mm), 8 pixels per meter.

Dual data signals, the spare data line can continue to transmit signals from the damaged LED to the LEDs behind it, adding security to the LED operation.

Runs up to 25 meters with power injected at one end, virtually no color inconsistency, minimal voltage drop.

Color changes directly from a 36V controller that outputs SPI signal WiFi-SPI-UFO (controller in the kit), or use a 5-24V UCS1903 controller to output the SPI signal and use separate power supplies for the light strip and the controller.

UCS1903 Datasheet 

Product Specifications

How to Control: 

1. Use 36V SPI LED controller WiFi-SPI-UFO:

The strip and controller can share the same 36V power supply.

2. Use DC5-24V SPI LED controller:

The strip and controller must be powered separately, the controller with DC5-24V power supply and the strip with DC36V power supply, and the controller must not have a power output! Below is the wiring diagram: