SMD 5050 Tri-chip LED Far Red 730nm Light Strip 300 Diodes 5m

Model: FSLSR-60-5050-730NM Review stars 5.0 (1 Reviews) Various options in stock
Starting at: $99.98 $43.9856% off
Qty Discounts Off Price
1-9
$43.98
10-49
$43.10
50-99
$41.78
100+
$40.90
* Discounts may vary based on options below
Select Specifications:
Select Length:
Qty: -+
Free shipping over $299Ships via DHL / UPSWarranty covered

Accept the project customization, please contact us for commercial offers and technical support.

  • Product Information
  • Reviews
  • Downloads
  • Images
  • LED Strip Light Guide

Product Information

LED 5050 SMD tri-chip 730nm far red led light strip is an efficient lighting solution designed for plant growing and customized home health red light therapy.

Each 730nm LED contains three chips, which can provide high brightness and stable light. 300 730nm far red led diodes are evenly distributed on the 5-meter long strip, 16.66mm/0.66in LED spacing to ensure light uniformity and continuity. 

The strip's 730nm light LED source is especially suitable for plant growth rooms, greenhouses, vertical farms, home gardening, etc. Each plant receives sufficient 730 nm wavelength light and avoids contrasting strengths and weaknesses caused by uneven illumination. Also, the light strip can be cut to size as needed, easily bent and adhered, allowing you to DIY your own customized red light therapy panel or red light yoga corner. 

Our LED 730nm light tape comes with IP20 to IP68 waterproof ratings, suitable for use in a variety of environments, including wet greenhouses, outdoor growing environments and red light sauna houses. 

Designed with a low voltage input of 12 or 24 volts to increase the safety of the plant supplemental lighting system and the at home light therapy LED system, also reduces energy consumption for long time operation. Equip a 96W power adapter or LRS-100 series power supply in the kit. Dimmable via external LED dimmer

Please note that the PCB design shown in the image is for the 7-day version. The PCB design for the 1-3 days differs slightly.

730nm Far Red Light Strips | SuperLightingLED

 

730 nm LED Strip Applications

730nm far-red led light strip translates cutting-edge photobiomodulation technology into flexible designs for daily integration: 

- Customizable light therapy pods, red light saunas

- Daily routine phototherapy beauty, personalized daily care stations

- Custom targeted phototherapy

- Plant growth and indoor gardening optimization

 

Peak wavelength at 731.5nm, genuine 730nm LED far-red light. View test report: PDF

 

Product Specification

CEFCCRoHSISASGSISOLIFETIMEwarranty

LED Strip Type: LED Far Red 730nm Light Strip
LED Chip: SMD5050
Input Voltage: 12/24V DC
Light Wavelength:  730 nm
Light Color: Red
Dimension: 5-meter roll, 10mm width for IP20/65, 12mm width for IP67/68
LED Quantity: 60 LEDs/m
Outlet Cable:  2-pin power wires (red-V+, black-V-)
Working Power: 60W roll max
Cut Unit:  3-LED, 6-LED
Cut Length:  50mm/1.97", 100mm/3.94"
IP Rating: Non-Waterproof IP20, Waterproof IP65/67/68
Beam Pattern: 120 degree

 

 

Reviews

Customer Experience

Your feedback is important to us! Share your thoughts and photos with other customers.

S
02/02/2026
5 or 5 stars

Essential for flower induction and the Emerson Effect

I integrated these 730nm Far-Red strips into my supplemental greenhouse lighting to trigger faster flowering cycles, and the results have been remarkable. The 730nm wavelength is critical for manipulating the phytochrome state in plants, and these chips hit the target spectrum perfectly. By running these for 10-15 minutes at the end of the day cycle, I have seen a noticeable decrease in the time it takes for crops to transition to the generative phase. The build quality of the 5050 SMD chips is excellent, and the 5-meter length is the perfect size for mounting along the underside of my existing LED panels. The light intensity is consistent throughout the entire strip, and the heat dissipation is well-managed for such a specialized wavelength. If you are a professional grower looking to optimize your photoperiod control, this is a high-quality, reliable tool for your facility.

Downloads

Files for FSLSR-60-5050-730NM
Need this page for a project file or an engineering check? Click Open PDF, then save or print it from your browser. For CAD drawings, IES files or a signed test report, contact our engineers and quote the model number.

Images

These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

SMD 5050 Tri-chip LED Far Red 730nm Light Strip 300 Diodes 5mSMD 5050 Tri-chip LED Far Red 730nm Light Strip 300 Diodes 5mSMD 5050 Tri-chip LED Far Red 730nm Light Strip 300 Diodes 5mSMD 5050 Tri-chip LED Far Red 730nm Light Strip 300 Diodes 5mSMD 5050 Tri-chip LED Far Red 730nm Light Strip 300 Diodes 5m

LED Strip Light Guide

Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.

What voltage does this LED strip light run on?
This model is offered in 24VDC · 12VDC. Lower voltage means a shorter run per feed: at 12 V feed power roughly every 5 m, at 24 V roughly every 10 m. Longer runs get power injected at both ends. Connecting to the power supply
Which waterproof rating should I choose?
Available on this model: Underwater IP68 - Adhesive Back · Waterproof IP67 - Adhesive Back · Surface Glued IP65 - Adhesive Back · Non-Waterproof IP20 - Adhesive Back. IP20 is for dry indoor use, IP65 handles splashes, IP67 suits outdoor and wet areas, IP68 is for continuous submersion. Choosing a waterproof rating
Can I cut it to length?
Yes. Cut only on the marked cut lines between the copper pads — the cut interval for this model is on its spec sheet. Rejoin with solder or a solderless connector. Cutting LED strip lights · we can also cut to length and fit your connector before shipping: custom LED strip light assembly.
What size power supply do I need?
Take the watts per metre from the specification above, multiply by the length you are running, then add about 25% headroom. Power calculation guide · Choosing a power supply
Complete your setup
Picked for this model from items in stock.

Customers who bought this product also purchased...

Scroll for more →