12V 10mm 400LEDs 5050 Addressable White TM1814 LED Strip

Model: TM1814-WHITE-80W10B Review stars 0.0 (0 Reviews) Various options in stock
Starting at: A$50.27
Qty Discounts Off Price
1-19
A$50.27
20-49
A$49.26
50-99
A$48.26
100+
A$47.25
* Discounts may vary based on options below
Select Specifications:
Qty: -+
Free shipping over $299Ships via DHL / UPSWarranty covered

Accept the project customization, please contact us for commercial offers and technical support.

  • Product Information
  • Reviews
  • Downloads
  • Images
  • LED Strip Light Guide

Product Information

If you are looking to add some dynamic ambiance to simple warm white lighting or daylight lighting, addressable white led strip lights are a good choice. Check our high density 80LEDs/m 5050 TM1814 led addressable white strip, the white light with the black PCB board creates a high contrast.

Addressable white led strip provides adjustable white light so you can adjust the light brightness and pattern as needed. Switching different light modes such as running water, fading, blinking, breathing through programming or an SPI Bluetooth music controller SP107E (controller in the kit), this TM1814 white led strip will bring a rich and dynamic atmosphere to your space.

20 pixels per meter, one TM1814 IC chip controls four 5050 LEDs, 50mm cut segment. 

 

Note: SP636E, SP108E, and SP105E are not compatible with TM1814 white IC chip. 

 

TM1814 Datasheet Download PDF

 

Product Specifications

Item Type:  TM1814 Addressable White LED Strip
LED Chip:  TM1814 + SMD5050
Input Voltage:  DC12V
Power:  18W/m, 90W/Roll
LED Color Temperature:  Addressable Daylight 6000K
PCB Width:  10mm/0.4in
LED Quantity:  80LEDs/m, 400LEDs/Roll
Cut Segment:  4 LEDs (50mm/2in)
IC Pixel:  20 ICs/m, 100 ICs/Roll
Waterproof Rating:  Non-waterproof IP20 / Waterproof IP65 IP67 IP68
Lumen:  20-22 lm/LED
Beam Angle:  120°
Strip Length:  5m/16.4ft

 

How to Wire TM1814 White LED Strip?

addressable led strip wiring diagram

Reviews

Customer Experience

Your feedback is important to us! Share your thoughts and photos with other customers.

Downloads

Files for TM1814-WHITE-80W10B
Need this page for a project file or an engineering check? Click Open PDF, then save or print it from your browser. For CAD drawings, IES files or a signed test report, contact our engineers and quote the model number.

Images

These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

12V 10mm 400LEDs 5050 Addressable White TM1814 LED Strip12V 10mm 400LEDs 5050 Addressable White TM1814 LED Strip12V 10mm 400LEDs 5050 Addressable White TM1814 LED Strip12V 10mm 400LEDs 5050 Addressable White TM1814 LED Strip12V 10mm 400LEDs 5050 Addressable White TM1814 LED Strip

LED Strip Light Guide

Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.

Which controller does this LED strip light need?
Addressable LED strip lights take a data signal, so they need an SPI (pixel) controller that supports this IC — an ordinary RGB controller will not drive them. Data flows one way: connect the controller to the input end marked with the arrow. Wiring addressable LED strip lights
Do I need power injection?
5 V addressable LED strip lights lose voltage fastest, so longer runs need power fed in at both ends and at intervals along the run; 12 V and 24 V versions carry further. Keep the data line short between controller and first pixel. Choosing an addressable LED strip light
Which waterproof rating should I choose?
Available on this model: Underwater IP68 - Adhesive Back · Outdoor Silicone Tube IP67 - With Brackets · Surface Glued IP65 - Adhesive Back · Non-Waterproof IP20 - Adhesive Back. IP20 is for dry indoor use, IP65 handles splashes, IP67 suits outdoor and wet areas, IP68 is for continuous submersion. Choosing a waterproof rating
Can I cut it to length?
Yes. Cut only on the marked cut lines between the copper pads — the cut interval for this model is on its spec sheet. Rejoin with solder or a solderless connector. Cutting LED strip lights · we can also cut to length and fit your connector before shipping: custom LED strip light assembly.
What size power supply do I need?
Take the watts per metre from the specification above, multiply by the length you are running, then add about 25% headroom. Power calculation guide · Choosing a power supply
Complete your setup
Picked for this model from items in stock.

Customers who bought this product also purchased...

Scroll for more →