12V TM1903 Digital White Light LED Strip Highest Density 234 Per Meter

Model: TM1903-WHITE-12V-1170W12 Review stars 0.0 (0 Reviews) Various options in stock
Starting at: £17.44
Qty Discounts Off Price
1-19
£17.44
20-49
£17.09
50-99
£16.74
100+
£16.39
* Discounts may vary based on options below
Select Specifications:
Select PCB Width:
Select LED Color:
 Sold Out 
Free shipping over $299Ships via DHL / UPSWarranty covered

Accept the project customization, please contact us for commercial offers and technical support.

  • Product Information
  • Reviews
  • Downloads
  • Images
  • LED Strip Light Guide

Product Information

A 234 LEDs/m highest density TM1903 IC controlled brightest white digital led strip. TM1903 is similar to WS2811, with 12V+, DAT, and GND 3 pin wires. The programmable white led strip is 12mm wide, with 1170 LEDs evenly distributed over the 5-meter strip length, providing an extremely uniform lighting effect.

A TM1903 IC controls 9 SMD2835 white LEDs, with one IC control area every 38.4 mm (1.5"). 26 pixels per meter, 130 pixels per roll. Through the built-in program of the running water led controller or self-programming, the white led pixel tape can present various dynamic effects, such as flowing, breathing, bouncing, and so on.

No connector available. Soldering is recommended to connect the cut led white strip.

Kit: addressable white led controller CONFULL-SP636E. 

 

Product Specifications

Item Type:  Highest Density Digital White Light LED Strip
LED Chip:  External TM1903 IC + SMD2835 LED
Input Voltage:  DC12V
Power:  23.4W/m max, 117W/Roll
Working Temperature:  -20℃~+45℃
Storage Temperature:  -20℃~+60℃
LED Color Temperature:  Addressable daylight 6000K
Dimension:  L5000mm*W12mm*H2mm
LED Quantity:  234 LEDs/m, 71/ft
Cut Segment:  9 LEDs (38.4mm/1.5in)
IC Pixel:  26 ICs/m, 130 ICs/Roll
Waterproof Rating:  Non-waterproof IP20 / Waterproof IP67
Beam Angle:  120°

 

3 Pin Addressable LED White Strip Wiring Diagram: 

addressable led strip wiring diagram

12V TM1903 Digital White Light LED Strip Highest Density 234 Per Meter

Reviews

Customer Experience

Your feedback is important to us! Share your thoughts and photos with other customers.

Downloads

Files for TM1903-WHITE-12V-1170W12
Need this page for a project file or an engineering check? Click Open PDF, then save or print it from your browser. For CAD drawings, IES files or a signed test report, contact our engineers and quote the model number.

Images

These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

12V TM1903 Digital White Light LED Strip Highest Density 234 Per Meter12V TM1903 Digital White Light LED Strip Highest Density 234 Per Meter12V TM1903 Digital White Light LED Strip Highest Density 234 Per Meter12V TM1903 Digital White Light LED Strip Highest Density 234 Per Meter12V TM1903 Digital White Light LED Strip Highest Density 234 Per Meter12V TM1903 Digital White Light LED Strip Highest Density 234 Per Meter

LED Strip Light Guide

Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.

Which controller does this LED strip light need?
Addressable LED strip lights take a data signal, so they need an SPI (pixel) controller that supports this IC — an ordinary RGB controller will not drive them. Data flows one way: connect the controller to the input end marked with the arrow. Wiring addressable LED strip lights
Do I need power injection?
5 V addressable LED strip lights lose voltage fastest, so longer runs need power fed in at both ends and at intervals along the run; 12 V and 24 V versions carry further. Keep the data line short between controller and first pixel. Choosing an addressable LED strip light
Which waterproof rating should I choose?
Available on this model: Outdoor Silicone Tube IP67 - With Brackets · Non-Waterproof IP20 - Adhesive Back. IP20 is for dry indoor use, IP65 handles splashes, IP67 suits outdoor and wet areas, IP68 is for continuous submersion. Choosing a waterproof rating
Can I cut it to length?
Yes. Cut only on the marked cut lines between the copper pads — the cut interval for this model is on its spec sheet. Rejoin with solder or a solderless connector. Cutting LED strip lights · we can also cut to length and fit your connector before shipping: custom LED strip light assembly.
What size power supply do I need?
Take the watts per metre from the specification above, multiply by the length you are running, then add about 25% headroom. Power calculation guide · Choosing a power supply
Will it fit an aluminium profile, and how dense are the LEDs?
PCB width 12mm (0.47in). Choose a profile whose inner width is at least the PCB width; denser LEDs give a smoother line close to a diffuser. LED aluminium profiles
Complete your setup
Picked for this model from items in stock.

Customers who bought this product also purchased...

Scroll for more →