660nm Red + 810nm IR + 450nm Blue 3-in-1 Multi Wavelength LED Strip

Model: FSLSR-IR-3IN1-450-660-810 Review stars 0.0 (0 Reviews) Various options in stock
Starting at: $33.98
Qty Discounts Off Price
1-9
$33.98
10-49
$33.30
50-99
$32.62
100+
$31.60
* Discounts may vary based on options below
Select Specifications:
Select Length:
Qty: -+
Free shipping over $299Ships via DHL / UPSWarranty covered

Accept the project customization, please contact us for commercial offers and technical support.

  • Product Information
  • Reviews
  • Downloads
  • Images
  • LED Strip Light Guide

Product Information

Super Lighting LED's 660nm + 810nm + 450nm red IR blue multi spectrum led strip light can simultaneously address skin problems (anti-inflammatory, restorative) and deep tissue repair (analgesic, hair regrowth) through the synergistic action of different wavelengths in human phototherapy applications and pet physiotherapy applications, and for plant replenishment for plant growth.

660nm red light, 810nm near infrared light, 450nm blue light all three wavelengths are integrated into the same SMD5050, which provides a more even and uniform illumination than the individual LEDs of the wavelrngths. This 3-in-1 wavelength design allows intelligent control of ir red led light wavelengths and modes through programmable cell phone software WLED control, if you choose our kit, you will get a triple band light strip, a WLED programmable controller, and a LRS-100 Meanwell power supply.

 

• SMD5050 three-in-one blue IR red

• 450nm+810nm+660nm, 450nm+730nm+660nm, 450nm+850nm+660nm light therapy options (we also offer an ultra-bright triple-row version)

• 12V or 24VDC input, 14.4 watts per meter, 4.4 watts per foot

• 10mm wide flexible PCB with yellow double-sided adhesive tape backing

• 5 meters 16.4 feet per roll, 72 watts per roll

• With bilateral 4-pin wires, black-V+, green-810nm, red-660nm, blue-450nm

• IP20, IP65, IP67, IP68 protection ratings available

660nm Red + 810nm IR + 450nm Blue 3-in-1 Multi Wavelength LED Strip

 

3-in-1 Infrared Red Blue LED Spectrum Download PDF

 

DC12V, IP20 Version Available in US Amazon Platform

Buy on Amazon

 

Product Specification

LED Strip Type:  Tri-Band Red IR Blue LED Strip Light
LED Type:  SMD5050
Input Voltage:  DC12V, DC24V
Power:  72W/Reel, 14.4W/m, 4.4W/ft
Light Wavelength 660 nanometer (red wire) + 810 nanometer (green wire) + 450 nanometer (blue wire)
Width:  10mm/0.4" for IP20 and IP65, 12mm/0.47" for IP67 and IP68
Length:  5m, 16.4-ft reel
Height 2.2mm
LED Color:  Red + IR red glow + Blue
LED Quantity:  60 LEDs/m, 300 LEDs reel
Cuttable: 

DC12V - 3 LEDs, 50mm/2"

DC24V - 6 LEDs, 100mm/4"

Connector:  4-pin power cord at both sides
Connector Length:  10-15cm (4"-6")
Waterproof Rating:  Non-waterproof IP20, Waterproof IP65 IP67 IP68
Beam Angle:  120°
Lifespan:  50,000 hours +

 

Reviews

Customer Experience

Your feedback is important to us! Share your thoughts and photos with other customers.

Downloads

Files for FSLSR-IR-3IN1-450-660-810
Need this page for a project file or an engineering check? Click Open PDF, then save or print it from your browser. For CAD drawings, IES files or a signed test report, contact our engineers and quote the model number.

Images

These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

660nm Red + 810nm IR + 450nm Blue 3-in-1 Multi Wavelength LED Strip660nm Red + 810nm IR + 450nm Blue 3-in-1 Multi Wavelength LED Strip660nm Red + 810nm IR + 450nm Blue 3-in-1 Multi Wavelength LED Strip

LED Strip Light Guide

Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.

What voltage does this LED strip light run on?
This model is offered in DC24V · DC12V. Lower voltage means a shorter run per feed: at 12 V feed power roughly every 5 m, at 24 V roughly every 10 m. Longer runs get power injected at both ends. Connecting to the power supply
Which waterproof rating should I choose?
Available on this model: Underwater IP68 - Adhesive Back · Outdoor Silicone Tube IP67 - Adhesive Back · Surface Glued IP65 - Adhesive Back · Non-Waterproof IP20 - Adhesive Back. IP20 is for dry indoor use, IP65 handles splashes, IP67 suits outdoor and wet areas, IP68 is for continuous submersion. Choosing a waterproof rating
Can I cut it to length?
Yes. Cut only on the marked cut lines between the copper pads — the cut interval for this model is on its spec sheet. Rejoin with solder or a solderless connector. Cutting LED strip lights · we can also cut to length and fit your connector before shipping: custom LED strip light assembly.
What size power supply do I need?
Take the watts per metre from the specification above, multiply by the length you are running, then add about 25% headroom. Power calculation guide · Choosing a power supply
Complete your setup
Picked for this model from items in stock.

Customers who bought this product also purchased...

Scroll for more →