GS8206 RGB Auto LED Color Changing Strip Built In 36 Patterns

Model: DCFLS-GS8206-AUTO Review stars 0.0 (0 Reviews) Various options in stock
Starting at: A$50.27
Qty Discounts Off Price
1-9
A$50.27
10-19
A$49.51
20-49
A$49.26
50+
A$48.26
* Discounts may vary based on options below
Select Specifications:
Select PCB Width:
Select Length:
Select Light Type:
Qty: -+
Free shipping over $299Ships via DHL / UPSWarranty covered

Accept the project customization, please contact us for commercial offers and technical support.

  • Product Information
  • Reviews
  • Downloads
  • Images
  • LED Strip Light Guide

Product Information

12V S Type Zig-Zag LED Strip, 48LEDs/m 10mm 10W/m, 16 ICs per meter, 3-LED/62.5mm cuttable. 

Discover our GS8206 RGB Auto LED Color-Changing Strip Light – engineered to deliver captivating, addressable-style lighting effects without the complexity of a digital controller. Simply connect to a standard 12V low-voltage LED power supply, and the GS8206 IC instantly activates 36 dynamic auto-chasing patterns, including mesmerizing flowing colors, dreamlike gradients, and seamless RGB transitions. For full creative control, pair with an external digital controller to unlock static colors, custom sequences, and synchronized light shows tailored to your vision.

 

Key Highlights:

• S-Shaped (Zig-Zag/Cobra): Ultra-flexible with 90° bends for curved installs like channel letters, neon signs, and intricate signage.

• Effortless Auto Mode: Powers up to automatically cycle through vibrant chases and color waves – no extra controllers needed!

• Pro Control Option: Pair with an external digital controller for custom static colors, gradients, or synchronized shows tailored to your vision.

 

Specifications

Strip Type:  Auto RGB LED Color Changing Cobra Light Strip
LED Chip:  SMD5050 + GS8206 IC
Input Voltage:  DC12V
PCB Width: 10mm/0.4"
LED Color:  RGB
LED Quantity:  48 LEDs/m
Strip Length:  5m/16.4ft
IC Pixel:  16 ICs/m, 80 ICs/roll
Cut Segment:  62.5mm/2.46"
Waterproof Rating:  Non-waterproof IP20, Splash-proof IP65
Power: 10W/m, 50W/roll
Beam Angle:  120°
Lumen:  20-22 lm/LED

 

Reviews

Customer Experience

Your feedback is important to us! Share your thoughts and photos with other customers.

Downloads

Files for DCFLS-GS8206-AUTO
Need this page for a project file or an engineering check? Click Open PDF, then save or print it from your browser. For CAD drawings, IES files or a signed test report, contact our engineers and quote the model number.

Images

These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

GS8206 RGB Auto LED Color Changing Strip Built In 36 PatternsGS8206 RGB Auto LED Color Changing Strip Built In 36 PatternsGS8206 RGB Auto LED Color Changing Strip Built In 36 PatternsGS8206 RGB Auto LED Color Changing Strip Built In 36 PatternsGS8206 RGB Auto LED Color Changing Strip Built In 36 Patterns

LED Strip Light Guide

Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.

Which controller does this LED strip light need?
Addressable LED strip lights take a data signal, so they need an SPI (pixel) controller that supports this IC — an ordinary RGB controller will not drive them. Data flows one way: connect the controller to the input end marked with the arrow. Wiring addressable LED strip lights
Do I need power injection?
5 V addressable LED strip lights lose voltage fastest, so longer runs need power fed in at both ends and at intervals along the run; 12 V and 24 V versions carry further. Keep the data line short between controller and first pixel. Choosing an addressable LED strip light
Which waterproof rating should I choose?
Available on this model: Surface Glued IP65 - Adhesive Back · Non-Waterproof IP20 - Adhesive Back. IP20 is for dry indoor use, IP65 handles splashes, IP67 suits outdoor and wet areas, IP68 is for continuous submersion. Choosing a waterproof rating
Can I cut it to length?
Yes. Cut only on the marked cut lines between the copper pads — the cut interval for this model is on its spec sheet. Rejoin with solder or a solderless connector. Cutting LED strip lights · we can also cut to length and fit your connector before shipping: custom LED strip light assembly.
What size power supply do I need?
Take the watts per metre from the specification above, multiply by the length you are running, then add about 25% headroom. Power calculation guide · Choosing a power supply
Will it fit an aluminium profile, and how dense are the LEDs?
PCB width 10mm (0.39in). Choose a profile whose inner width is at least the PCB width; denser LEDs give a smoother line close to a diffuser. LED aluminium profiles
Complete your setup
Picked for this model from items in stock.

Customers who bought this product also purchased...

Scroll for more →