DC5V Multi Color RGB LED Light Strip 5mm COB 576 High Density Ambient Glow

Model: FSLCOB-5VRGB-576W5 Review stars 0.0 (0 Reviews) Various options in stock
Starting at: $21.98
Qty Discounts Off Price
1-20
$21.98
21-50
$21.32
51-99
$20.66
100+
$19.78
* Discounts may vary based on options below
Select Specifications:
Select Length:
Qty: -+
❓ Ask a question about this item — an engineer replies within 12 hours
Free shipping over $299Ships via DHL / UPSWarranty covered

Accept the project customization, please contact us for commercial offers and technical support.

  • Product Information
  • Reviews
  • Downloads
  • Images
  • LED Strip Light Guide

Product Information

This DC 5V COB RGB LED strip light delivers continuous, dot-free color mixing across an ultra-narrow 5mm PCB with a low profile height of 2.3mm. Engineered with a dense 576 LEDs per meter configuration, this multi color rgb light strip eliminates visible diode spots even when installed without a diffuser lens. Operating at 10W per meter on safe 5V direct current, it runs directly from portable power banks, USB sources, or dedicated 5V DC power adapters. 

Each 5-meter reel comes equipped with dual-ended 4-pin connectors for immediate integration with standard RGB controllers. Direct compatibility with RF RGB controllers and compact IR remote RGB control boxes for 3-channel dynamic color adjustment.

Key Features

576 LEDs/m COB Density

Continuous coating produces unbroken, dotless multi color illumination without dark spots.

5mm Ultra-Narrow PCB

Slim 5mm width and 2.3mm profile fit into miniature aluminum profiles, tight gaps, and compact enclosures.

DC 5V Low-Voltage Operation

Safe operating voltage allows direct power from rechargeable battery packs, 5V power adapters, and USB ports.

Pre-Soldered 4-Pin Terminations

Both ends feature 4-pin male and female plug-in connectors that interface with standard RGB controllers.

Selectable Ingress Protection

Supplied standard in IP20 for indoor dry areas with an optional IP67 silicone sleeve version for moisture resistance.

Product Specifications

ParameterDetails
Product SKUFSLCOB-5VRGB-576W5
Working VoltageDC 5V
Rated Power10W/m (approx. 50W per full 5m reel)
LED Density576 LEDs/m
LED Packaging TypeCOB (Chip on Board)
Color FormatRGB Multi-Color (Red, Green, Blue)
PCB Width5mm (0.20 in)
Strip Height2.3mm (0.09 in)
Standard Reel Length5 meters (16.4 feet)
Max Continuous Run (Single Feed)1.0m to 1.5m (requires parallel injection for longer runs)
Connection Interface4-pin plug-in connector pre-installed on both ends
Control ProtocolCommon Anode (+5V, R-, G-, B-) PWM dimming
Ingress Protection RatingIP20 indoor dry (IP67 silicone jacket optional)
Strip ColorWhite
Adhesive BackingSelf-adhesive double-sided mounting tape
Beam Angle180 degrees
Cut Unit20.83mm (0.82in)

Application Scenarios

Battery-Powered and Wearable Cosplay LightingOperating on DC 5V, this led strip cob light connects directly to compact 5V power banks for wearable costumes, convention props, and portable theatrical rigs.
PC Case Mods and Desktop Peripheral BacklightingIntegrate this strip cob led into custom computer cases and monitor surrounds. Connecting to internal 5V headers or external 4-pin RGB LED strip connectors delivers uniform color blending without reflective LED hotspots.
Automotive Interior and Portable Equipment AccentsLow-voltage 5V operation enables safe installation in vehicle cabins, glove boxes, and customized instrumentation panels requiring low-heat, short-run multi color rgb led lights.

How to Install & Use This LED Strip

  1. Measure your required run length and cut only along the designated copper solder cut lines marked on the 5mm PCB.
  2. Connect the pre-fitted 4-pin connector to your 5V RGB controller, ensuring the +5V polarity arrow aligns with the controller power channel.
  3. Perform a dry test by powering the system with a compatible 5V power supply before removing the adhesive liner.
  4. Peel back the adhesive release paper and press the LED strip firmly onto the target surface, holding pressure along the run.
  5. For runs exceeding 1.5 meters, wire additional 5V power feed wires in parallel to prevent voltage drop and color shifting.

⚠ Precautions

  • Do not power this LED strip with 12V or 24V power supplies; applying more than 5V DC will permanently damage the COB diodes.
  • Single-ended power feeds should not exceed 1.0 to 1.5 meters due to low-voltage resistance; longer runs require dual-end feeds or power injection.

What's in the Box

  • ✓1 x 5-meter reel of 5V 5mm COB RGB LED Strip Light (576 LEDs/m)
  • ✓2 x Pre-attached 4-pin male/female plug-in connectors (one on each reel end)

 

Reviews

Customer Experience

Your feedback is important to us! Share your thoughts and photos with other customers.

Downloads

Files for FSLCOB-5VRGB-576W5
Need CAD drawings, IES files or a signed test report? Contact our engineers and quote the model number.

Images

These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

 DC5V Multi Color RGB LED Light Strip 5mm COB 576 High Density Ambient Glow DC5V Multi Color RGB LED Light Strip 5mm COB 576 High Density Ambient Glow DC5V Multi Color RGB LED Light Strip 5mm COB 576 High Density Ambient Glow DC5V Multi Color RGB LED Light Strip 5mm COB 576 High Density Ambient Glow

LED Strip Light Guide

Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.

Which waterproof rating should I choose?
Available on this model: Outdoor Silicone Tube IP67 - Adhesive Back · Transparent Heat Shrink Tube IP67 · Non-Waterproof IP20 - Adhesive Back. IP20 is for dry indoor use, IP65 handles splashes, IP67 suits outdoor and wet areas, IP68 is for continuous submersion. Choosing a waterproof rating
Can I cut it to length?
Yes. Cut only on the marked cut lines between the copper pads — the cut interval for this model is on its spec sheet. Rejoin with solder or a solderless connector. Connector options on this model: Waterproof Wires · 4-Pin Plug Connectors. Cutting LED strip lights · we can also cut to length and fit your connector before shipping: custom LED strip light assembly.
What size power supply do I need?
Take the watts per metre from the specification above, multiply by the length you are running, then add about 25% headroom. Power calculation guide · Choosing a power supply
Complete your setup
Picked for this model from items in stock.