Related Products
Tick the accessories you need and add them in one go
$18.98
$20.98.jpg "Male Female Screwless 2Pin Single Color LED Strip Lighting Fast Power Supply 5.5*2.1mm DC Connector Accesories")
$0.99
$2.99
$0.99
$1.29
$19.98
Product Information
Introducing the narrowest COB LED strip available on the market. With an unprecedented PCB width of just 2mm, this ultra-slim LED strip opens up new possibilities for lighting in confined spaces where standard strips cannot fit. It utilizes advanced Chip-on-Board (COB) technology to produce a completely uniform, dot-free line of light, perfect for high-end aesthetic applications. The high density of 480 LEDs per meter ensures brilliant and consistent illumination. Operating on a safe, low-voltage DC 5V, this 2mm COB LED strip is the ultimate solution for intricate DIY projects, scale models, detailed backlighting, and any application demanding a discreet yet powerful light source. Its flexibility and slim profile allow for seamless integration into the most challenging designs.
Key Features
Unprecedented 2mm Width
At only 2mm wide, this strip is designed for edge-lighting, fine-detail backlighting, and micro-channel applications previously impossible with standard LED strips.
Perfectly Uniform & Dotless Light
COB technology eliminates LED hotspots, creating a single, continuous line of smooth, beautiful light.
High-Density Illumination
Features 480 LEDs per meter for a bright, consistent, and powerful light output suitable for accent and task lighting.
Low Voltage 5V DC Input
Safe to handle and ideal for DIY electronics, battery-powered projects, wearables, and USB-powered applications.
Flexible and Cuttable
Highly flexible to bend around curves and can be cut every 12.5mm (0.49in) for precise, custom-length installations.
Product Specifications
| Parameter | Details |
|---|---|
| Product Model | FSLCOB-2MM-480-5V |
| Input Voltage | DC 5V |
| Power Consumption | 5 Watts per meter |
| LED Type | Chip-on-Board (COB) |
| LED Density | 480 LEDs per meter |
| Dimensions | W2mm*H1.7mm (bare strip) |
| Luminous Flux | 40-60 lm/W |
| Color Rendering Index (CRI) | Ra > 90 |
| Color Temperature Options | 3000K / 4000K / 6500K (white) |
| Beam Angle | 180° |
| Cutting Increment | Every 12.5mm (0.49 inch) |
| Reel Length | 5 meters (16.4 feet) |
| IP Rating | IP20, IP67 |
| Operating Temperature | -20°C to +50°C |
| Recommended Max Run Length | 2 meters (to avoid voltage drop) |
Application Scenarios
Frequently Asked Questions
Q: Can this 2mm LED strip be cut to a custom length?
A: Yes, this strip can be cut at the designated solder pads, which are located every 12.5mm along the strip.
Q: What is the maximum length I can run in a single piece?
A: Due to its low 5V input voltage, we strongly recommend a maximum continuous run of 2 meters (6.5 feet) to avoid voltage drop and ensure even brightness. For longer installations, you must supply power at multiple points.
Q: What kind of power supply do I need for this 2mm COB strip?
A: You need a regulated DC 5V power supply. To calculate the required wattage, multiply the length of your strip in meters by 5W/m, then add 20% headroom. For a 2-meter section, you would need (2m * 5W/m) * 1.2 = 12W, so a 5V 2.5A power supply or greater is recommended.
Q: Is this micro LED strip dimmable?
A: Yes, it is fully dimmable. You can control the brightness using a compatible 5V single-color PWM LED dimmer or controller.
Q: What makes COB technology better than traditional SMD LED strips?
A: COB (Chip-on-Board) technology places LED chips directly on the circuit board and covers them with a continuous layer of phosphor. This creates a completely seamless and dot-free line of light, eliminating the hotspots seen with individual SMD LEDs.
Q: How do I connect wires to a strip this narrow?
A: Due to the 2mm width, careful soldering is the most reliable connection method. Ensure you use a fine-tipped soldering iron and thin gauge wire. No available 2mm LED connectors.
Reviews
Customer Experience
Your feedback is important to us! Share your thoughts and photos with other customers.
Downloads
Files for FSLCOB-2MM-480-5VImages
These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!
LED Strip Light Guide
Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.
Customers who bought this product also purchased...
Scroll for more →
