WS2812 Straight Neopixel 8*5050 RGB Addressable LED With Integrated Drivers

Model: NPS-WS2812-RGBX8 Review stars 0.0 (0 Reviews) Various options in stock
Starting at: $1.99
Qty Discounts Off Price
1-4
$1.99
5-9
$1.95
10-14
$1.89
15+
$1.81
* Discounts may vary based on options below
Select Specifications:
Qty: -+
Free shipping over $299Ships via DHL / UPSWarranty covered

Accept the project customization, please contact us for commercial offers and technical support.

  • Product Information
  • Reviews
  • Downloads
  • Images
  • LED Strip Light Guide

Product Information

Main Feature:
  • Adafruit neopixel with intelligent reverse connection protection, power reverse connection will not damage the IC

  • Neopixels's IC control circuit and LED point light source share a power supply

  • The control circuit and the RGB chip are integrated in a 5050 packaged component to form a complete external control pixel

  • Built-in signal shaping circuit, any pixel will receive the signal after waveform shaping and then output to ensure that the line waveform distortion will not accumulate

  • Built-in power-on reset and power-down reset circuit

  • The three primary colors of each pixel can achieve 256 levels of brightness display, complete the full true color display of 16,777,216 colors, and the scanning frequency is not less than 400Hz/s

  • RGB lights can be simply cascaded from one output pin to another input pin

  • Serial cascade interface, can complete data receiving and decoding through a signal line

  • No need to add any circuit when the transmission distance of any two points is less than 5 meters

  • When the refresh rate is 30 frames per second, the number of cascades is not less than 1024 points

  • Data transmission speed can reach 800Kbps

  • The driving current of each lamp is the same, so the color of each lamp is highly consistent, even if the voltage changes, it will not affect the brightness of the lamp beads.

 

Main application areas:

LED full-color luminous character string light, LED full-colour module, LED full-colour flexible light bar, hard light bar, LED guardrail tube.

LED point light source, LED pixel screen, LED special-shaped screen, various electronic products, electrical equipment marquee.

 

Standards and Certifications

12VDC CE FCC RoHS ISA SGS ISO LIFETIME warranty led factory

 

Specifications

Shell Shape: Straight

LED Quantity: 8leds

PCB Color: Black/White

Color: RGB

IC Chip: WS2811

LED Model: 5050

 

 

Reviews

Customer Experience

Your feedback is important to us! Share your thoughts and photos with other customers.

Downloads

Files for NPS-WS2812-RGBX8
Need this page for a project file or an engineering check? Click Open PDF, then save or print it from your browser. For CAD drawings, IES files or a signed test report, contact our engineers and quote the model number.

Images

These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

WS2812 Straight Neopixel 8*5050 RGB Addressable LED With Integrated DriversWS2812 Straight Neopixel 8*5050 RGB Addressable LED With Integrated Drivers

LED Strip Light Guide

Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.

Which controller does this LED strip light need?
Addressable LED strip lights take a data signal, so they need an SPI (pixel) controller that supports this IC — an ordinary RGB controller will not drive them. Data flows one way: connect the controller to the input end marked with the arrow. Wiring addressable LED strip lights
Do I need power injection?
5 V addressable LED strip lights lose voltage fastest, so longer runs need power fed in at both ends and at intervals along the run; 12 V and 24 V versions carry further. Keep the data line short between controller and first pixel. Choosing an addressable LED strip light
Can I cut it to length?
Yes. Cut only on the marked cut lines between the copper pads — the cut interval for this model is on its spec sheet. Rejoin with solder or a solderless connector. Cutting LED strip lights · we can also cut to length and fit your connector before shipping: custom LED strip light assembly.
What size power supply do I need?
Take the watts per metre from the specification above, multiply by the length you are running, then add about 25% headroom. Power calculation guide · Choosing a power supply
Complete your setup
Picked for this model from items in stock.

Customers who bought this product also purchased...

Scroll for more →