Raspberry Pi & FastLED Programming WS2812 5V Individual Pixel COB LED Band

Model: FSLCOB-5V-WS2812BX160W10 Review stars 0.0 (0 Reviews) Various options in stock
Starting at: $41.98
Qty Discounts Off Price
1-19
$41.98
20-49
$41.14
50-99
$40.30
100+
$39.46
* Discounts may vary based on options below
Select Specifications:
Select PCB Width:
Select Length:
Select LED Quantity:
Qty: -+
Free shipping over $299Ships via DHL / UPSWarranty covered

Accept the project customization, please contact us for commercial offers and technical support.

  • Product Information
  • Reviews
  • Downloads
  • Images
  • LED Strip Light Guide

Product Information

Super Lighting LED's addressable cob led strip series 10mm WS2812 5V 160-led/m chip-on board product, adapts digital SPI WS2812 protocol control, compatible with Arduino, raspberry pi, fastLED, WLED and other platforms or library control. 

This ws2812 individually addressable rgb digital cob led strip has very small cutting distance, every 12.5mm contains two on-board LED chips can be cut, flexible to adapt to various lengths of DIY projects.

The 10mm flexible circuit board has stable performance, and the high quality milky white diffusion adhesive layer gives this cob tape light excellent color performance. 

Each LED is independently controllable to precisely customize your light script - from dynamic fading to pixel animation, 800 led diode lights are programmed and defined by you. 

Adopting 3-pin JST male connector (signal input) + 2-pin power cable design, plug-and-play, convenient for long-distance use of supplementary power.

Programming WS2812 5V Individual Pixel COB LED Band

 

We also offer the ultimate slim 2.7mm and 5mm cob WS2812-like led strips for stealth-level installation, with dynamic colors outlining every detail.

 

Package Recommendation

X7 controller: powerful central control, support a variety of special effects mode, wireless remote control / APP control, easy to realize intelligent light switching;

• LRS-150F-5 power supply (5V/30A): industrial-grade stable power supply, for high-density LED strip to provide long-lasting surging power.

 

Product Specification

CEFCCRoHSISASGSISOLIFETIMEled factory

LED Strip Type:  Individually-addressable WS2812 COB LED Strip
IC Chip:  WS2812
Input Voltage:  DC 5V
PCB Width:  10mm for IP20, 12mm for IP67 and IP68
Power: 
12W/m, 3.66W/ft, 60W/Reel
LED Color:  RGB
LED Quantity:  160 LEDs/m, 800 LEDs a reel
IC Quantity:  160/m, 800/reel
Length:  5m 16.4ft
Connector:  3-pin JST male connector at one side and 2-pin wires at the other
Cut Length:  12.5mm (0.5")
Beam Angle:  180°
Lumen: 110lm
Waterproof Rating:  IP20 Non-waterproof, IP67 IP68 Outdoor Waterproof

 

Reviews

Customer Experience

Your feedback is important to us! Share your thoughts and photos with other customers.

Downloads

Files for FSLCOB-5V-WS2812BX160W10
Need this page for a project file or an engineering check? Click Open PDF, then save or print it from your browser. For CAD drawings, IES files or a signed test report, contact our engineers and quote the model number.

Images

These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

Raspberry Pi & FastLED Programming WS2812 5V Individual Pixel COB LED BandRaspberry Pi & FastLED Programming WS2812 5V Individual Pixel COB LED BandRaspberry Pi & FastLED Programming WS2812 5V Individual Pixel COB LED BandRaspberry Pi & FastLED Programming WS2812 5V Individual Pixel COB LED BandRaspberry Pi & FastLED Programming WS2812 5V Individual Pixel COB LED Band

LED Strip Light Guide

Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.

Which waterproof rating should I choose?
Available on this model: Underwater IP68 - Adhesive Back · Outdoor Silicone Tube IP67 - Adhesive Back · Non-Waterproof IP20 - Adhesive Back. IP20 is for dry indoor use, IP65 handles splashes, IP67 suits outdoor and wet areas, IP68 is for continuous submersion. Choosing a waterproof rating
Can I cut it to length?
Yes. Cut only on the marked cut lines between the copper pads — the cut interval for this model is on its spec sheet. Rejoin with solder or a solderless connector. Cutting LED strip lights · we can also cut to length and fit your connector before shipping: custom LED strip light assembly.
What size power supply do I need?
Take the watts per metre from the specification above, multiply by the length you are running, then add about 25% headroom. Power calculation guide · Choosing a power supply
Will it fit an aluminium profile, and how dense are the LEDs?
PCB width 10mm (0.39in) · LED density 160 LEDs/m. Choose a profile whose inner width is at least the PCB width; denser LEDs give a smoother line close to a diffuser. LED aluminium profiles
Complete your setup
Picked for this model from items in stock.

Customers who bought this product also purchased...

Scroll for more →