RGB+CCT LED Strip Lights

Think of it as two lighting systems in one. Standard RGB light strips mix red, green, and blue to make a crude, often bluish or pinkish white. An RGB+CCT LED strip light has those same three color chips, but it *also* has two dedicated white chips: one warm white (like 2700K) and one cool white (like 6500K). This means you get vibrant, saturated colors *and* a pure, high-quality white light you can tune to any temperature in between. It's the difference between a novelty light and a professional lighting tool.

For that job, RGB+CCT LED strip lights are the definitive choice. You get the full color spectrum from the RGB chips for accent and mood lighting, plus the ability to produce a clean, high-CRI white light that's perfect for tasks. In places like kitchens, retail displays, or art studios where you need to see colors accurately, the tunable white channel is non-negotiable. These are the best LED lights when you can't compromise on either color or function.

It's all about fighting voltage drop. A 24V LED strip lets you run roughly double the length of a 12V strip from a single power feed before the lights at the far end start to look dim or shift color. For a typical strip, that means you can go about 10 meters (32.8 ft) on a 24V system versus just 5 meters (16.4 ft) on 12V. Using a 24V LED strip also means less current for the same power, which can let you use slightly smaller wiring. If you have even longer runs, we also stock 48V LED strips.

You can't power 50 ft of 24V LED strip lights from just one end—the voltage drop would be too severe by the end of the run. The best practice is to run power to the center of the 50 ft length and let the strip run 25 ft in each direction. Another solid method is to power both ends of the run from the same power supply. This ensures the entire strip gets the voltage it needs for consistent brightness and color. Don't try to daisy-chain multiple reels together without adding a new power feed.

No, that won't work correctly. An RGB+CCT strip needs six conductors: one for red, green, blue, warm white, cool white, and a common positive (V+). An RGBW controller only has five outputs. You'd be leaving one of the white channels completely disconnected and wouldn't be able to tune your white color temperature. You have to use a controller specifically designed for RGB+CCT, which will have all six terminals.

First, always mount the strip in an aluminum channel, not directly onto a wood or plaster surface. The channel acts as a heat sink and dramatically extends the LED's lifespan. Second, clean the mounting surface thoroughly with isopropyl alcohol before sticking the strip down. Third, avoid sharp 90-degree bends; use solderless connectors or a gentle curve instead. And finally, always connect your strip to the controller and driver *before* connecting the driver to mains power.

This is a really common and easy-to-fix wiring mistake. It just means the R, G, and B wires from your strip are landed on the wrong R, G, and B terminals on your controller. There's no universal color code for the wires, so it happens all the time. Just disconnect the power and swap the wires around at the controller until selecting red makes the strip red, green makes it green, and so on. You haven't damaged anything.

Yes, absolutely. A huge portion of the strips we ship are built to custom drawings. You can specify the exact length down to the millimeter, what type of connectors you need, and the length of the lead wires. Just send us a sketch—a CAD file, a photo of a napkin drawing, it doesn't matter. One of our engineers will spec out the parts list, create a wiring diagram, and send a quote back, usually within 12 hours. There's no fee for this service and no obligation to place an order.

It depends on the IP rating you choose. An IP20 strip is bare and only for dry indoor locations. For a bathroom ceiling or splashback, you need at least an IP65-rated strip, which has a silicone coating to protect against splashes. For direct exposure to rain or inside a shower, you need to step up to an IP67 (in a silicone tube) or IP68 (fully potted) strip. We offer our RGB+CCT strips in all these ratings, including fully submersible options with IP68 connectors.

Color temperature, measured in Kelvin (K), describes how warm or cool the white light appears. 2700K is very warm and cozy, like a classic incandescent bulb, which is great for living rooms and bedrooms. 4000K is a neutral, clean white often used in offices and kitchens. 6500K is a crisp, cool daylight color that's excellent for task lighting and workshops. The power of an RGB+CCT strip is that you can blend its warm and cool chips to create any white you want, which can dramatically change the feel of a room, as explained in our guide to light color effects.

COB stands for 'Chip on Board,' and it's a newer technology that produces a completely seamless, dot-free line of light. Instead of seeing individual bright spots from each LED chip, you get one continuous glow. This makes a huge difference anywhere the strip itself might be visible, or where it's reflecting off a glossy surface like a polished stone countertop or high-gloss floor. For a perfectly uniform look, COB is the best choice. Our flexible COB RGB+CCT strip is ideal for these kinds of applications.