24V 2835 CCT Color Tuning Sawtooth Shape LED Strip Light S

Model: FSLCCTSS-24V-2835X196 Review stars 0.0 (0 Reviews) Various options in stock
Starting at: $18.98
Qty Discounts Off Price
1-19
$18.98
20-49
$18.60
50-99
$18.22
100+
$17.84
* Discounts may vary based on options below
Select Specifications:
Select PCB Width:
Select Length:
Select Installation:
Qty: -+
Free shipping over $299Ships via DHL / UPSWarranty covered

Accept the project customization, please contact us for commercial offers and technical support.

  • Product Information
  • Reviews
  • Downloads
  • Images
  • LED Strip Light Guide

Product Information

CCT Color Tuning Sawtooth Shape LED Strip Light S with 8mm wide micro-sawtooth printed circuit board, every two LEDs are 5mm apart, very high LED density. Color temperature 2700K CCT LEDs and 6500K CCT LEDs are independent.

When adjusted to 2700K single warm white or 6500K single daylight, 98 LEDs per meter are lit; when adjusted to any color temperature between them, 196 LEDs per meter (all lights on the sawtooth strip) are lit. The ability to adjust the CCT color temperature is done through external tunable white control.

The bending ability of the micro-serrated led strip is slightly weaker than a full S led strip for applications where a little bending is required, but is still stronger than a normal strip light. The benefit is that the micro serrated shape led strip light design can accommodate more LEDs and provide greater brightness and lumens for your place.

 

  • DC 24-volt power input

  • Micro sawtooth printed circuit board design, 8mm thin strip width

  • 2700K to 6500K CCT color tuning, warm white LEDs and daylight white LEDs evenly distributed on the light strip

  • High LED density of 196 lights per meter (98 warm lights + 98 daylight lights)

  • Flexible bending properties

 

 

Product Specifications

LED Strip Type: CCT Color Tuning Sawtooth Shape LED Strip Light S
LED Chip: SMD2835
Input Voltage: 24V DC
PCB Width: 8mm / 0.3"
Light Color: CCT tunable white, 2700K-6500K
Dimension: 16.4ft/roll
LED Quantity: 196 LEDs per meter (98 warm white LEDs + 98 daylight LEDs), 5.1mm/0.2" LED interval
Working Power: 18W/m, 5.5W/ft, 90W/roll
Cut Unit: 14 LEDs, 71.42mm/2.8"
Lumen:  5-10lm/LED, 292lm/ft-585lm/ft (full lights on)
Beam Pattern: 120 degrees
Lifespan:  50,000+hours
Waterproof Rating:  Non-waterproof IP20

 

CCT LED Strip Light S Wiring Diagram (just for referrence): 

CCT led strip wiring diagram

24V 2835 CCT Color Tuning Sawtooth Shape LED Strip Light S

Reviews

Customer Experience

Your feedback is important to us! Share your thoughts and photos with other customers.

Downloads

Files for FSLCCTSS-24V-2835X196
Need this page for a project file or an engineering check? Click Open PDF, then save or print it from your browser. For CAD drawings, IES files or a signed test report, contact our engineers and quote the model number.

Images

These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

24V 2835 CCT Color Tuning Sawtooth Shape LED Strip Light S24V 2835 CCT Color Tuning Sawtooth Shape LED Strip Light S24V 2835 CCT Color Tuning Sawtooth Shape LED Strip Light S24V 2835 CCT Color Tuning Sawtooth Shape LED Strip Light S24V 2835 CCT Color Tuning Sawtooth Shape LED Strip Light S24V 2835 CCT Color Tuning Sawtooth Shape LED Strip Light S

LED Strip Light Guide

Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.

Which waterproof rating should I choose?
Available on this model: IP54 For Damp Environments · IP20 Non-Waterproof. IP20 is for dry indoor use, IP65 handles splashes, IP67 suits outdoor and wet areas, IP68 is for continuous submersion. Choosing a waterproof rating
Can I cut it to length?
Yes. Cut only on the marked cut lines between the copper pads — the cut interval for this model is on its spec sheet. Rejoin with solder or a solderless connector. Cutting LED strip lights · we can also cut to length and fit your connector before shipping: custom LED strip light assembly.
What size power supply do I need?
Take the watts per metre from the specification above, multiply by the length you are running, then add about 25% headroom. Power calculation guide · Choosing a power supply
Will it fit an aluminium profile, and how dense are the LEDs?
PCB width 8mm (0.31in). Choose a profile whose inner width is at least the PCB width; denser LEDs give a smoother line close to a diffuser. LED aluminium profiles
Complete your setup
Picked for this model from items in stock.

Customers who bought this product also purchased...

Scroll for more →