Ultra Narrow 3mm 200LEDs WS2812C 2020 Thinnest ARGB LED Strip 1m Roll

Model: WS2812C-2020-200W3 Review stars 0.0 (0 Reviews) Various options in stock
Starting at: €27.36
Qty Discounts Off Price
1-19
€27.36
20-49
€26.95
50-99
€26.26
100+
€25.71
* Discounts may vary based on options below
Select Specifications:
Select Input Voltage:
Select Length:
Qty: -+
Free shipping over $299Ships via DHL / UPSWarranty covered

Accept the project customization, please contact us for commercial offers and technical support.

  • Product Information
  • Reviews
  • Downloads
  • Images
  • LED Strip Light Guide

Product Information

This is our narrowest and densest WS2812C-2020 LED strip, with 200 LEDs per meter evenly distributed on a 3mm narrow PCB. The high-density LED design provides brighter illumination and higher resolution. And the 3mm width allows it to be installed in narrow spaces, providing a flexible layout and mounting options. 

The 3mm thinnest 200LEDs/m 2020 LED strip integrates WS2812C IC chips with programmable features. Each 2020 LED can be controlled independently, allowing users to create a variety of colors, brightness, and dynamic effects. Provide unlimited creative possibilities for LED screen displays and art decorations.

Note: Due to the ultra slim 3mm PCB width restricting the placement of resistors, there will be two LEDs in one cut unit. Each LED remains individually addressable.

Signal arrows are printed on the back of the strip, you can peel off the adhesive backing to view.

Ultra Narrow 3mm 200LEDs WS2812C 2020 Thinnest ARGB LED Strip

 

WS2812C 2020 Datasheet Download PDF  

 

Product Specification

Light Strip Type:  3mm 200LEDs/m WS2812C-2020 LED Strip
LED Chip:  SMD2020 + Built-in WS2812C IC
Input Voltage:  DC5V
Power:  20W/m
Working Temperature:  -20℃~+45℃
Storage Temperature:  -20℃~+60℃
LED Color:  Addressable RGB
PCB Width:  3mm
LED Quantity:  200 LEDs/m
IC Quantity: 
200 ICs/m
Cut Unit: 
1 LED can be cut (5mm)
Waterproof Rating:  Non-waterproof IP20, Outdoor Waterproof IP67
Strip Length:  1m/3.3ft

 

How To Wire WS2812C-2020 LED Strip?

3-wire (VCC, DAT, GND) WS2812C-2020 ARGB led strip requires a digital led controller and DC5V power supply to work properly. 

addressable led strip wiring diagram

Ultra Narrow 3mm 200LEDs WS2812C 2020 Thinnest ARGB LED Strip 1m Roll

Reviews

Customer Experience

Your feedback is important to us! Share your thoughts and photos with other customers.

Downloads

Files for WS2812C-2020-200W3
Need this page for a project file or an engineering check? Click Open PDF, then save or print it from your browser. For CAD drawings, IES files or a signed test report, contact our engineers and quote the model number.

Images

These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

Ultra Narrow 3mm 200LEDs WS2812C 2020 Thinnest ARGB LED Strip 1m RollUltra Narrow 3mm 200LEDs WS2812C 2020 Thinnest ARGB LED Strip 1m RollUltra Narrow 3mm 200LEDs WS2812C 2020 Thinnest ARGB LED Strip 1m RollUltra Narrow 3mm 200LEDs WS2812C 2020 Thinnest ARGB LED Strip 1m RollUltra Narrow 3mm 200LEDs WS2812C 2020 Thinnest ARGB LED Strip 1m RollUltra Narrow 3mm 200LEDs WS2812C 2020 Thinnest ARGB LED Strip 1m Roll

LED Strip Light Guide

Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.

Which controller does this LED strip light need?
Addressable LED strip lights take a data signal, so they need an SPI (pixel) controller that supports this IC — an ordinary RGB controller will not drive them. Data flows one way: connect the controller to the input end marked with the arrow. Wiring addressable LED strip lights
Do I need power injection?
This model runs on DC5V. 5 V addressable LED strip lights lose voltage fastest, so longer runs need power fed in at both ends and at intervals along the run; 12 V and 24 V versions carry further. Keep the data line short between controller and first pixel. Choosing an addressable LED strip light
Which waterproof rating should I choose?
Available on this model: Transparent Heat Shrink Tube IP67 · Non-Waterproof IP20 - Adhesive Back. IP20 is for dry indoor use, IP65 handles splashes, IP67 suits outdoor and wet areas, IP68 is for continuous submersion. Choosing a waterproof rating
Can I cut it to length?
Yes. Cut only on the marked cut lines between the copper pads — the cut interval for this model is on its spec sheet. Rejoin with solder or a solderless connector. Cutting LED strip lights · we can also cut to length and fit your connector before shipping: custom LED strip light assembly.
What size power supply do I need?
Take the watts per metre from the specification above, multiply by the length you are running, then add about 25% headroom. Power calculation guide · Choosing a power supply
Will it fit an aluminium profile, and how dense are the LEDs?
LED density 160 LEDs/m · 200LEDs/m. Choose a profile whose inner width is at least the PCB width; denser LEDs give a smoother line close to a diffuser. LED aluminium profiles
Complete your setup
Picked for this model from items in stock.

Customers who bought this product also purchased...

Scroll for more →