Related Products
Tick the accessories you need and add them in one go- €21.17
- €33.55
- €30.90
- €33.55
- €64.44
- €40.60€44.158% off
Product Information
The BinColor BC-R4M is a 4-channel constant voltage LED wireless receiver engineered to drive low-voltage flexible lighting loads with smooth, flicker-free dimming across 4096 grayscale levels. Operating on DC 12V to DC 24V inputs, this compact unit delivers up to 5A per channel (20A combined capacity), supporting up to 240W at 12V or 480W at 24V. Whether you configure it for four independent single-color circuits, two tunable white CCT runs, one RGB group, or one four-color RGBW LED strip setup, the BC-R4M interprets wireless RF commands from up to 40m to 50m away in unobstructed spaces. As part of a synchronized multi-zone control series, it communicates exclusively with BinColor T series wireless remotes (T1, T2, T3, T4, T5, T6, T7, and T8) to orchestrate responsive multi-room or multi-fixture architectural schemes across residential and commercial properties.
Core Capabilities and Engineering Highlights
Flexible 4-Channel Multi-Mode Architecture
Supports wiring for 4 single-color channels, 2 tunable white circuits, 1 RGB circuit, or 1 RGBW circuit on a single unit.
20A Combined Output Capacity
Supplies 5A per channel continuously, driving 240W of total LED load at 12V DC or 480W at 24V DC.
4096-Level Precision Grayscale Dimming
Smooth logarithmic light level shifts eliminate visible stepping and camera-detected strobe across all color modes.
Long-Range RF Reception
Maintains dependable wireless signal acquisition at distances of 40m to 50m from paired transmitters.
BinColor T-Series Remote Compatibility
Pairs directly with handheld and wall-mounted BinColor transmitters including T1, T2, T3, T4, T5, T6, T7, and T8.
Broad Industrial Operating Temperature
Functions reliably in ambient operational conditions ranging from -30 deg C to +55 deg C.
Technical Performance and System Integration
- Delivers 4096 grayscale steps per channel for smooth color mixing without abrupt brightness transitions.
- Accepts standard constant voltage DC 12V to DC 24V inputs from an external LED power supply.
- Accommodates up to 4 zones of architectural dimming when integrated into commercial or residential layouts.
- Houses heavy-gauge screw terminal blocks inside a 176 mm x 46 mm x 30 mm enclosure for clean raceway mounting.
- Features persistent memory retention to restore the previous lighting state automatically following power interruptions.
Technical Specifications
| Parameter | Details |
|---|---|
| Model / SKU | BC-R4M |
| Manufacturer Brand | BinColor |
| Product Classification | Constant Voltage LED Wireless Receiver |
| Input Voltage Range | DC 12V - DC 24V |
| Output Channels | 4 Channels |
| Current Output Per Channel | 5A / Channel |
| Total Maximum Current | 20A (Combined across active channels) |
| Maximum Load Capacity (12V) | 240W (60W per channel x 4 CH) |
| Maximum Load Capacity (24V) | 480W (120W per channel x 4 CH) |
| Dimming Resolution | 4096 Grayscale Levels |
| Supported LED Configurations | 4x Single Color, 2x CCT Tunable White, 1x RGB, 1x RGBW |
| Wireless Operating Range | 40m to 50m (Open line-of-sight) |
| Compatible Transmitters | BinColor T Series Only (T1, T2, T3, T4, T5, T6, T7, T8) |
| Wiring Connection Method | Screw Down Terminals (Common Anode V+) |
| Housing Dimensions | 176 mm (L) x 46 mm (W) x 30 mm (H) |
| Operating Temperature Range | -30 deg C to +55 deg C |
| Power Loss Memory | Yes (Stores state on power cut) |
Application Scenarios
How to Control & Use This Controller
- 1. Disconnect the main AC power source before mounting the hardware or touching any electrical terminals.
- 2. Connect your DC 12V or DC 24V power supply leads to the receiver INPUT screw terminals, matching positive (V+) and negative (V-) polarity.
- 3. Connect your LED strip light leads to the OUTPUT terminals: attach the common positive wire to V+ and the individual negative lines to channels 1, 2, 3, or 4 based on your strip type (Single color, CCT, RGB, or RGBW).
- 4. Restore power to the DC power supply; verify the power indicator LED illuminates on the BC-R4M housing.
- 5. Press the learning key (ID match button) on the BC-R4M receiver, then press the zone or power button on your compatible BinColor T-series remote (T1 through T8) within 5 seconds to complete wireless pairing.
- 6. Test dimming, dynamic color shifting, and zone on/off controls across your paired fixtures.
- Match voltage strictly: the DC power supply voltage must match the voltage requirement of the connected LED strip light (DC 12V in = DC 12V strip; DC 24V in = DC 24V strip).
- Do not exceed the maximum current limit of 5A on any single channel or 20A across all combined channels.
- This receiver is intended for dry indoor installations only; do not expose to moisture or rain.
- This model is exclusively compatible with BinColor T series remotes (T1, T2, T3, T4, T5, T6, T7, T8) and does not pair with remotes from other product families.
- Always verify wiring polarity (Common Anode V+) before energizing the system to avoid damaging the internal MOSFETs.
What's in the Box
- ✓1 x BinColor BC-R4M 4-Channel LED Strip Light Receiver
- ✓1 x User Instruction Manual
Frequently Asked Questions
Q: What LED strip light types can I connect to the BC-R4M receiver?
A: The BC-R4M features 4 output channels that can be configured to operate 4 single-color LED strip runs, 2 tunable white CCT runs, 1 RGB run, or 1 RGBW LED strip run.
Q: What is the maximum electrical load this receiver can drive?
A: Each channel supports up to 5A, with a maximum combined capacity of 20A across all channels. That equates to 240W total at 12V DC or 480W total at 24V DC.
Q: Which wireless remotes are compatible with the BC-R4M?
A: The BC-R4M works exclusively with BinColor T-series wireless controllers, including model numbers T1, T2, T3, T4, T5, T6, T7, and T8. It is not compatible with remotes from other brands or series.
Q: What is the effective wireless reception range of this receiver?
A: The BC-R4M detects remote signals up to 40m to 50m away in unobstructed environments. Physical walls, metal studs, and enclosed metal cabinets may reduce this operational distance.
Q: Does the BC-R4M remember its lighting settings after a power failure?
A: Yes, the receiver incorporates an internal non-volatile memory function that restores the last selected color, brightness level, and state once power is re-applied.
Q: How do I expand my installation if my total LED strip power exceeds 20A?
A: When your LED load exceeds 20A or 480W at 24V, install a compatible constant voltage power repeater/data amplifier downstream from the BC-R4M to power additional LED strip runs safely.
Reviews
Customer Experience
Your feedback is important to us! Share your thoughts and photos with other customers.
Downloads
Files for BC-R4MImages
These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

LED Strip Lights Guide
Here you can learn anything about LED strip lights — pick the topic you are interested in to go deeper. We cover LED strip lights, power supplies, controllers, accessories, and how to connect LED strip lights. You can also watch our demo videos.
Led strip lights
►Everything you need to know before you buying led strip lights
| Top 6 Considerations Before Buying LED Strip Lights 1. Where do I want to place the LED strip lights? Indoor or outdoor? • What are waterproof led strip lights? • How to cut and connect waterproof led strip lights? 2. How much LED brightness do I need? 3. The working voltage is available? • 5V VS 12V VS 24V led strips • AC VS DC 4. How long is the LED strip light suitable for my project? 5. Do I need an LED light controller to adjust the LED color and brightness? 6. How to power the LED strip lights? 1. How do led strip lights work? 2. How long can you run an LED strip? 3. How long do LED strip lights last? Is it worth getting led strip lights? 1. Do LED strip lights use a lot of electricity? 2. Why are LED lights energy efficient? 3. Are LED Strip Lights sustainable? 4. What are the pron and cons of led strip lights? 5. Precautions for led strip lights 1. Do LED strip lights overheat? 2. How do you stop LED strips from overheating? 3. Can LED strips catch fire? 4. Is it safe to sleep with LED strip lights on? What are the types of led strip lights? Flexible led strip lights VS rigid led strip lights - 1. What are flexible led strip lights? 2. What are rigid led strip lights? 3. What happens if you bend LED strip lights? 4. What is the difference between flexible led strips and rigid led strips? 1. Can you cut led light strips? 2. What happens if you cut an led strip? 3. How to cut led strip lights? 4. How to connect RGB color changing led strip lights with a connector? 5. How to know what your led strip light is? How to choose the correct SMD led for your strip? Which is the brightest SMD LED? What does SMD 5050 mean? How many lumens is a 5050 SMD LED? How to know what type of LED strip? What is the difference between 2835 and 5050 LED? |
►COB led strip light
| 1. What is COB? 2. What is the COB production process? 3. Different types of COB strip lights 4. What is the difference between COB and SMD led strip lights? 5. What is the difference between COB and LED? 6. Are COB led strips better? 7. How to cut and connect COB led strips? 8. How to install COB led strip lights? 9. Can COB light strips use aluminum channels? 10. Why choose superlightingled? |
►Led neon lights
| 1. What is led neon light? 2. What are neon led lights used for? 3. Are led neon lights good? 4. How to choose led neon rope lights? 5. Are led neon ropes use DC or AC? 6. Can you change the light-emitting angle or the luminous way of neon led strip? 1. How to cut led neon lights 2. Can led neon lights be connected? 3. Easy 7 steps to make led neon lights 4. How to install led neon rope? |
►Addressable led strip
| Ultimate Guide to Choosing the Right Addressable LED Strip What is an addressable LED strip? Can you cut addressable LED strips? How to judge if an LED strip is individually addressable? How to choose the best DC12V addressable led strips? How to choose the best DC5V digital led strips? How to choose the right IC for your project? Which IC is most commonly used? How do I know my IC type? How do I know if my IC is good or bad? How many types of IC are there? |
►Color, color temperature, and CRI
| The Color Difference Between Warm White 2700K, 3000K, 4000K, 6000K Pure White and 7000K Cool White 1. What is color temperature? 2. What color temperature is right for me? • 2700K VS 3000K • How obvious is the difference between 2700K and 3000K? • Warm White 3000K VS Natural White 4000K VS Daylight White 6000K • Warm White VS Cool White 3. Enjoy 2700K, 4000K, 6000K 4. Further Reading: How to install Warm White LED light strip? How to choose the right color for your led strip lights? - 1. How many colors are in LED strip lights? 2. What do LED light colors mean? 3. Why do white LED light turns to yellow? 4. Why are your led strip lights not the same color? 5. What is the most relaxing color for LED lights? 6. What color led lights is best for sleeping? 7. Are led lights bad for your eyes? 8. Is cool white or warm white better for eyes? 1. What is the best color temperature? 2. Does color temperature keep the same as time goes by? 3. What color temperature is best for night? 4. Led strip lights about color temperature,CCT VS RGBW VS RGBCCT; What is color rendering index? 1. What is CRI in led lights? 2. How to choose the right CRI when buying led strip lights? 3. What is the relationship between CRI and brightness? 4. Is higher CRI better? High CRI VS Low CRI; 5. How to find CRI value? |
Led strip light connection
| How to connect led strip lights? 1. How to connect led strip lights together? 2. How to connect LED light strips without connectors? 3. How to solder wires to LED strips? 4. How to connect LED strips without soldering? 5. Which one is better between soldering and using a connector? 6. How to connect mutiple led strip lights? 7. How many LED strip lights can you connect? How to connect led strip to the power supply? 1. Ensuring the working voltage and power first 2. How to hardwire led strip lights? 3. Can I connect multiple LED strips to the same LED power supply? How to wire led strip lights? How to wire single color led strip lights? How to wire tunable white/CCT led strip lights? How to wire RGB color changing led strip lights? |
Controller for led strip lights
| How to choose led strip light controllers? 1. WIFI controller 2. RF controller 3. IR controller 4. Bluetooth controller 5. Remote control and panel control 6. Single color controller and multi-color controller 7. DMX512 controller 8. SPI controller 9. DALI controller 10. 0/1-10V dimmer 11. Triac series 12. Sonsor series |
Led power supply
| How to calculate power for led strip lights? 4 steps to calculate the power you need Performance And Reasons Of LED Voltage Drop How to choose led strip light power supply? 1. Alternating current power supply VS Direct current power supply 2. Constant current power supply VS Constant voltage power supply 3. How to choose the best led power supply for your led strip light? |
Led strip light installlation
| How to install led strip lights? What accessories will be needed? 1. Adhesive installation for IP20 and IP65 led strip lights 2. How to choose the right led tape? 3. Can IP20 and IP65 led strip lights use aluminum profiles? 4. How to use aluminum profiles? 5. Mounted clip installation for IP67 and IP68 light strips How to install LED sensor stair lights? Lighting Up Your Stairs With LED Strip Lights Ideas How to install led strip lights on TV? How to install led strip lights outdoor? |
Accessories
| How to choose led strip light connectors? 1. Are all LED light strip connectors the same? 2. How do LED strip lights connectors work? 3. What connectors do you need for LED strip lights? 4. What are the different kinds of LED connectors? 5. How to choose the right connector for your led strip lights? Ultimate Guide on Aluminum Profile for LED Strip Lighting 1. What are aluminium profiles used for? 2. Why choose aluminum profiles? 3. Different types of LED aluminum profiles 4. LED aluminum profile VS COB LED strips 5. How to install LED aluminum channels? 6. How To Get Ideal Light Diffuser For Your LED Strip? 7. Add Black Aluminum LED Light Diffusers For Your Home Lighting 8. How To Find The Right Aluminum LED Light Strip Diffuser Channel? |




