Related Products
Tick the accessories you need and add them in one go
$44.98
$58.98$64.989% off
$22.99
$7.98
$44.98$49.9810% off
$14.98
Product Information
This DC24V WS2814 RGBW addressable LED strip light delivers 84 LEDs per meter using SMD5050 4-in-1 chips driven by dedicated SOP8 WS2814A ICs. Each roll contains 5 meters of 10mm wide flexible PCB engineered to run on constant 24V DC power, drawing 19.2W per meter (96W total per 5m roll). Operating with 1 IC controlling 7 LEDs per segment, the LED strip can be cut every 83.33mm along designated solder pads. It delivers a color rendering index of CRI 90 and comes in either RGB + 3000K Warm White or RGB + 6000K Daylight White configurations.
Key Features
WS2814A IC Pixel Architecture
Each external SOP8 WS2814A IC manages a bank of 7 SMD5050 LEDs across 83.33mm increments, creating 12 addressable control zones per meter.
Four-in-One SMD5050 Emitters
Combines red, green, blue, and dedicated white diode dies within a single SMD5050 package to eliminate uneven color fringing.
24V DC Low-Drop Operation
Engineered for 24V DC input to lower operating current, reducing thermal output and line voltage drop across full 5-meter runs.
Addressable RGBW Controller Pairing
Works with SPI single-data-line addressable RGBW controller transmitting WS2814 protocols.
Smart Home Wireless Control
Pairs seamlessly with an external WiFi Alexa LED controller for integration into home automation setups.
Dynamic Audio Synchronization
Connect a dedicated music LED controller to achieve real-time audio rhythm chasing effects across 12 zones per meter.
Product Specifications
| Parameter | Details |
|---|---|
| Product Model (SKU) | WS2814-RGBW-24V-84W10 |
| Input Voltage | 24V DC |
| LED Type | SMD5050 4-in-1 RGBW |
| LED Density | 84 LEDs/m (420 LEDs per 5m roll) |
| IC Type | WS2814A (SOP8 Package) |
| Control Pixel Density | 12 pixels/m (1 IC controls 7 LEDs) |
| Power Consumption | 19.2W/m (96W per 5m roll) |
| Operating Current | 0.8A/m (4.0A per 5m roll) |
| Color Temperature Options | RGB + 3000K Warm White / RGB + 6000K Daylight White |
| Color Rendering Index (CRI) | CRI 90 (White Channel) |
| Cut Interval | 83.33mm (every 7 LEDs) |
| PCB Width | 10mm |
| Roll Length | 5 meters (16.4 ft) |
| IP Ingress Rating | IP20 (Indoor) / IP67 (Water-Resistant) |
Application Scenarios
What's in the Box
- ✓1 x 5-meter (16.4ft) Reel of DC24V WS2814 RGBW Addressable LED Strip Light
- ✓2 x Pre-soldered 3-pin JST-SM Connection Lead
Frequently Asked Questions
Q: Can this WS2814 RGBW LED strip light be cut to length?
A:Yes, you can cut this LED strip every 83.33mm at the labeled copper cut pads, which correspond to groups of 7 LEDs controlled by one WS2814A IC.
Q: What power supply is required for a single 5m roll?
A:A 5-meter roll consumes 19.2W per meter (96W total at 24V DC). We recommend a 24V DC constant voltage power supply rated for at least 120W to maintain a 20% safety margin.
Q: How is the WS2814 protocol controlled?
A:The WS2814 IC uses a single-line NRZ serial data protocol compatible with addressable controllers that support WS2814 RGBW signal timing.
Q: Is this LED strip suitable for outdoor installations?
A:This LED strip is offered in an IP67 water-resistant version for wet areas, while the IP20 non-waterproof version is strictly for dry indoor enclosures.
Q: How many addressable control pixels are there per meter?
A:With 84 LEDs per meter and 1 WS2814A IC controlling every 7 LEDs, there are 12 individually controllable pixel segments per meter (60 pixels per 5m roll).
Q: Can I connect multiple 5m rolls in a single continuous line?
A:To prevent voltage drop, do not power runs longer than 5 meters from one end. You must inject 24V DC power every 5 meters while continuing the data line.
Q: What warranty is provided with this product?
A:This WS2814 RGBW LED strip comes with a standard 2-year factory warranty covering component performance and manufacturing defects.
Reviews
Customer Experience
Your feedback is important to us! Share your thoughts and photos with other customers.
Downloads
Files for WS2814-RGBW-24V-84W10Images
These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!
LED Strip Light Guide
Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.
