Related Products
Tick the accessories you need and add them in one go
Can.$25.39
Can.$31.04Can.$49.4037% off
Can.$35.28
Can.$40.93Can.$46.5712% off
Can.$25.39Can.$32.4522% off
Can.$43.75
Can.$26.80
Product Information
4mm wide super slim led strip light uses SMD4020 LEDs as the light source to emit light from the side, precisely controlling the direction of the beam through its directional illumination properties. The SK6812 (similar to the WS2812) control circuitry is integrated within the light emitting devices, and each 4020 RGB LED is a pixel, with the brightness and color of the 144 LEDs individually controlled via adafruit neopixel or other addressable controller.
This side firing led strip focuses on its extremely thin 4mm wide FPCB design, allowing the LED strip to be installed in tight or specially shaped spaces while the 144 lights are arranged in a density to provide a uniform dream color light effect. Requires 5 volts of low voltage power.
How do I connect this LED strip to the controller and power supply?
The slim side led strip features male JST quick connector on one end and female JST quick connector on the other. A connecting cable is included. Use the arrow markings on the strip board to identify which end should connect to the controller. The connection cable has three wires:
- Red wire (positive) connects to the controller's VCC pin.
- Green wire (data signal) connects to the controller's DAT pin.
- White wire (negative) connects to the controller's GND pin.
The controller must be connected to the power supply with correct polarity (positive to positive, negative to negative).
Product Specification
| LED Strip Type: | Super Slim Addressable RGB Side Fire LED Strip |
| LED Chip: | SMD4020 + SK6812 (WS2812) |
| Input Voltage: | 5V |
| LED Color: | RGB |
| LED Quantity: | 144 |
| IC Pixel: | 144, individually addressable |
| Length: | 1m 3.28ft roll |
| Cut: | 1 LED, 6.94mm/0.27" |
| FPCB Wdith: | 4mm |
| Connector: | 3-pin JST female + male |
| Connector Length: | 10-15cm (4-6") |
| Working Power: | 14.4W/m, 0.1W/LED, 4.4W/ft |
| Grey Scale: | 256 |
| Waterproof Rating: | Non-waterproof IP20 (Bare strip), IP67 waterproof (Sealed in silicon tube) |
| Beam Pattern: | 120 degrees |
Reviews
Customer Experience
Your feedback is important to us! Share your thoughts and photos with other customers.
Downloads
Files for SK6812-4020SIDE-144W4Images
These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!
LED Strip Light Guide
Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.
60W5A DC12V Constant Voltage Outdoor Waterproof IP67 Switching LED Dri…Can.$28.23
MeanWell DC12V 8.5A 102W GST120A12 AC To DC Reliable Green Industrial …Can.$80.47
250W DC5/12/24V Rainproof Switching Enclosed LED Driver Transformer Po…Can.$63.52
MeanWell DC24V 1.5A 36W GST36EU24 AC To DC Reliable Green Industrial L…Can.$33.86Customers who bought this product also purchased...
Scroll for more →
