DC24V Flexible Dimmable White COB Dotless Side Lit LED Strip Lights

COB flexible side-emitting LED strips emit light along the side, making it suitable for installation in gaps where light needs to be diffused from the side. The side lit LED design allows for better integration into the decorative design, providing a soft light without exposing the light source (PCB board).

The density of this side emitting LED strip is 378 chips per meter, and the high-quality COB coating achieves a completely spotless illumination. Even when holding the LED side facing light strip close, you won't see any light spots. The light is very silky and aesthetically pleasing. No need for an extra diffuser cover to disperse light.

With a CRI of 90+, this COB dotless LED strip provides a healthy white light source. It is available in multiple color temperatures. A controller is required if you want to adjust brightness. The dimmable COB LED strip is very flexible and can be easily bent to fit cabinets, display cases, stairs, and bedside.

The length of the LED edge-lit strip is 5m/16.4ft and the width is 10mm/0.39in. For extra physical protection, consider an aluminum channel with an inner size larger than 10mm to install the FCOB spotless LED tape. The back side is pre-applied with an upgraded version of strong adhesive backing. Peel off and stick it to the surface takes only a few minutes. The installation is solid, not easy to fall off.

Each 55mm/2.16in is an individual cut unit. Use scissors to customize your length. Designed with a hard wiring connection, the LED side emitting tape light has red and black wires coming out from both ends, easy to connect with a 24V power supply. Here to find addressable RGB version.

Features

1. Side lit LED design, seamlessly blend lighting system into your decoration.

2. Chip on board technology, high density of 378 chips across each meter.

3. Complete dotless illumination, no need for extra diffuser.

4. Dimmable white light, CRI 90+, with multiple color temperatures to choose from.

5. 24V power input, flexible and bendable for various shapes.

6. Cuttable every 55mm/2.16in for length customization.

7. Stronger adhesive backing for stable installation.

8.Available in IP20 non-waterproof and IP67 waterproof.

If you choose the COB led strip light kit, you will receive a dual row COB LED strip, a SP530E single color controller, and a LRS-150-24 power supply with an AC plug.

If you need water-resistant version, please check our 24V waterproof power transformer category and waterproof controller category.

Standards and Certifications

Product Specification