SMD5050 150LEDs 10mm Invisible IR 850nm Led Strip

Model: FSLSR-30-5050-850NM Review stars 0.0 (0 Reviews) Various options in stock
Starting at: $25.98 $15.9838% off
Qty Discounts Off Price
1-19
$15.98
20-49
$15.66
50-99
$15.34
100+
$14.86
* Discounts may vary based on options below
Select Specifications:
Select Length:
Qty: -+
Free shipping over $299Ships via DHL / UPSWarranty covered

Accept the project customization, please contact us for commercial offers and technical support.

  • Product Information
  • Reviews
  • Downloads
  • Images
  • LED Strip Light Guide

Product Information

The cost-effective Invisible IR 850nm Led Strip integrates 150 SMD5050 LED chips on a 10mm-wide flexible printed circuit board with a total length of 5 meters/16.4ft. With a compact design for easy installation in a variety of spaces. The back of the 850nm IR led strip comes with a strong adhesive backing that allows it to be easily attached to a variety of surfaces for both temporary and permanent installations. 

Each 5050 SMD LED chip emits near infrared light at a wavelength of 850nm, which is invisible to the human eye but can be observed as a faint pink glow through a cell phone camera. The power consumption of the whole roll of 300leds 850nm led strip lights is only 20 watts, which is energy-saving and environmentally friendly.

The invisibility of 850nm near-infrared light makes it ideal for applications requiring covert illumination, while its strong penetrating ability makes it more effective than visible light in some specific situations. Applications for 850nm IR led tape: Security monitoring, industrial inspection, beauty therapy, plant growth, pet care. 

Please note that the PCB design shown in the image is for the 1-3 day version. The PCB design for the 7-day version differs slightly.

 

• Comes with red/black power wires or DC female connectors at both ends

• Can be easily bent and cut to fit different application needs and space layouts

• 10mm strip width (IP67 and IP68 wider by 2-3mm)

• Multiple protection levels

• 48W wall plug power adapter in the kit

 

850nm Red Light IR LED Spectrum Download PDF

 

Product Specification

LED Strip Type:  Invisible IR 850nm Led Strip
LED Type:  SMD5050
Input Voltage:  DC12V, DC24V
Power:  20W/Roll
Light Wavelength 850nm
Dimensions L500cm(196.8 in ) x W1.0cm(0.4 in ) x H0.25cm(0.1 in )
LED Color:  Red glow
LED Quantity:  30 LEDs/m, 150 LEDs/16.4ft
Cuttable: 

DC12V - 3 LEDs, 100mm/4"

DC24V - 6 LEDs, 200mm/8"

Waterproof Rating:  Non-waterproof IP20 / Waterproof IP65 IP67 IP68
Beam Angle:  120°

 

SMD5050 IR 850nm Led Strip Working

Reviews

Customer Experience

Your feedback is important to us! Share your thoughts and photos with other customers.

Downloads

Files for FSLSR-30-5050-850NM
Need this page for a project file or an engineering check? Click Open PDF, then save or print it from your browser. For CAD drawings, IES files or a signed test report, contact our engineers and quote the model number.

Images

These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

SMD5050 150LEDs 10mm Invisible IR 850nm Led StripSMD5050 150LEDs 10mm Invisible IR 850nm Led StripSMD5050 150LEDs 10mm Invisible IR 850nm Led Strip

LED Strip Light Guide

Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.

What voltage does this LED strip light run on?
This model is offered in 24VDC · 12VDC. Lower voltage means a shorter run per feed: at 12 V feed power roughly every 5 m, at 24 V roughly every 10 m. Longer runs get power injected at both ends. Connecting to the power supply
Which waterproof rating should I choose?
Available on this model: Underwater IP68 - Adhesive Back · Waterproof IP67 - Adhesive Back · Surface Glued IP65 - Adhesive Back · Non-Waterproof IP20 - Adhesive Back. IP20 is for dry indoor use, IP65 handles splashes, IP67 suits outdoor and wet areas, IP68 is for continuous submersion. Choosing a waterproof rating
Can I cut it to length?
Yes. Cut only on the marked cut lines between the copper pads — the cut interval for this model is on its spec sheet. Rejoin with solder or a solderless connector. Connector options on this model: DC Female Connector (Black) · 2-Pin (V+, GND). Cutting LED strip lights · we can also cut to length and fit your connector before shipping: custom LED strip light assembly.
What size power supply do I need?
Take the watts per metre from the specification above, multiply by the length you are running, then add about 25% headroom. Power calculation guide · Choosing a power supply
Complete your setup
Picked for this model from items in stock.

Customers who bought this product also purchased...

Scroll for more →