2-Conductor Waterproof LED Strip Corner Connector

Model: WPACC-SC-2P-L Review stars 0.0 (0 Reviews) Various options in stock
PriceA$2.86
Qty Discounts Off Price
1-20
A$2.86
21-50
A$2.77
51-99
A$2.69
100+
A$2.57
* Discounts may vary based on options below
Select Specifications:
Qty: -+
❓ Ask a question about this item — an engineer replies within 12 hours
Free shipping over $299Ships via DHL / UPSWarranty covered

Accept the project customization, please contact us for commercial offers and technical support.

  • Product Information
  • Reviews
  • Downloads
  • Images
  • LED Strip Lights Guide

Product Information

This 2-pin L-shaped waterproof LED strip corner connector creates clean 90-degree turns for moisture-exposed installations without cutting traces or soldering wire jumpers. Built with a two-part piercing mechanism, the assembly pairs a rigid white terminal base with dual transparent locking brackets that position each LED strip firmly over solid copper contact pins. The downward-piercing design penetrates the underside of the flexible circuit board directly, establishing a reliable electrical bond with low-voltage LED systems while preserving continuous silicone jacket protection.

Available in dedicated 8mm and 10mm board widths, this corner connector accommodates single-color SMD tape along with dot-free white COB LED strip and colored COB LED strip options. Whether outfitting outdoor soffits, commercial kitchen counters, or shower niches, this fitting maintains continuous DC polarity around tight structural corners.

Key Features

Solderless Piercing Contact

Hardened copper alloy pins pierce directly through the underside of the LED strip PCB to make a vibration-resistant electrical bond without stripping silicone.

True 90-Degree L-Configuration

Pre-molded right-angle layout eliminates strip folding and stress cracking on interior corner joints.

Dual PCB Width Options

Available in 8mm and 10mm PCB width options to prevent lateral strip misalignment across single-color LED strip lights.

Transparent Locking Sleeves

Clear retention carriers allow direct visual verification of conductor alignment and pin seat depth before locking.

SMD and COB Compatibility

Engineered clearances seat traditional SMD chips as well as continuous phosphor-layer COB LED strip geometries.

6A Current Capacity

Supports up to 6A of continuous load, handling 72W runs at 12V DC and 144W runs at 24V DC.

Product Specifications

ParameterDetails
Model SKUWPACC-SC-2P-L
Connector TypeL-shaped strip-to-strip corner connector
Contact Pin Count2 Pins (+ / -)
Overall Dimensions (L x W x H)23.8mm x 23.8mm x 9mm
Compatible PCB Widths8mm or 10mm (selectable)
Compatible Strip ArchitectureSMD and COB single-color
Compatible Ingress ProtectionIP67 (silicone coated), IP68 (silicone tube)
Maximum Current Rating6A continuous
Carrier FrameHigh-transparency polycarbonate
Base Body MaterialFlame-retardant polycarbonate
Contact Pin MaterialTinned phosphor bronze

Application Scenarios

Under-Cabinet Kitchen ReturnsRoute continuous task lighting around 90-degree kitchen cabinetry corners without dead zones. The compact profile tucks into standard light valances while withstanding steam and moisture.
Architectural Outdoor Soffits and EavesTurn exterior fascia corners on residential rooflines. When combined with outdoor silicone sealant, the housing maintains electrical continuity without corrosion across seasonal humidity swings.
Bathroom Coves and Shower NichesNavigate perimeter tile angles in wet areas. For tips on choosing fittings for high-humidity areas, read our guide to selecting connectors.

How to Install the 2-Pin Waterproof LED Strip Corner Connector

  1. Trim your waterproof LED strip to the required cut line using sharp shears, ensuring an even, perpendicular cut across both copper contact pads.
  2. Take one transparent bracket carriage and slide the cut end of the waterproof LED strip into the channel with the aperture window facing downward toward the contact pads.
  3. Verify that the LED strip copper solder pads are fully centered within the transparent frame's bottom opening window.
  4. Seat the loaded carriage onto the corresponding arm of the white 90-degree pin base, matching polarity markings (+ and -) between both LED strip segments.
  5. Using parallel-jaw pliers or firm thumb pressure, press the transparent carriage down into the base until the bottom pins pierce the PCB board and the side latches click shut.
  6. Repeat the insertion and compression process for the second LED strip section on the adjacent 90-degree arm.
  7. Apply power to verify illumination. For exterior or wet-location use, inject neutral-cure silicone sealant into both cable entry openings.
⚠ Precautions
  • Always confirm your LED strip board width (8mm vs 10mm) prior to purchase; placing an 8mm board into a 10mm housing will cause off-center pin contact.
  • Observe polarity: ensure the positive trace line (+/V+) on the incoming LED strip routes to the positive trace line on the outgoing LED strip.
  • Never exceed the 6A maximum continuous load rating of this connector terminal.

What's in the Box

  • ✓1 x 2-Pin L-Shaped White Terminal Base
  • ✓2 x Transparent Retaining Bracket Sleeves

Frequently Asked Questions

Q: Will this corner connector fit both 8mm and 10mm LED strips?

A: The connector is manufactured in two dedicated width sizes: 8mm and 10mm. You must measure your LED strip's bare circuit board width and select the corresponding size from the product options.

Q: Is soldering required to join two waterproof LED strip lights at a 90-degree angle?

A: No soldering is required. The integrated piercing pins make solid electrical contact through the circuit board when pressed into place.

Q: Can I use this connector with continuous COB LED strip lights?

A: Yes, this connector is fully compatible with 2-pin single-color COB LED strip lights as long as the strip board width matches your selected connector width (8mm or 10mm).

 

Reviews

Customer Experience

Your feedback is important to us! Share your thoughts and photos with other customers.

Downloads

Files for WPACC-SC-2P-L
Need CAD drawings, IES files or a signed test report? Contact our engineers and quote the model number.

Images

These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

 2-Conductor Waterproof LED Strip Corner Connector 2-Conductor Waterproof LED Strip Corner Connector

LED Strip Lights Guide

Here you can learn anything about LED strip lights — pick the topic you are interested in to go deeper. We cover LED strip lights, power supplies, controllers, accessories, and how to connect LED strip lights.  You can also watch our demo videos.


Led strip lights

►Everything you need to know before you buying led strip lights

Top 6 Considerations Before Buying LED Strip Lights

1. Where do I want to place the LED strip lights? Indoor or outdoor?

• What are waterproof led strip lights?

• How to cut and connect waterproof led strip lights?

2. How much LED brightness do I need?

3. The working voltage is available?

• 5V VS 12V VS 24V led strips

• AC VS DC 

4. How long is the LED strip light suitable for my project?

5. Do I need an LED light controller to adjust the LED color and brightness?

6. How to power the LED strip lights?

What are led strip lights?

1. How do led strip lights work?

2. How long can you run an LED strip?

3. How long do LED strip lights last?

Is it worth getting led strip lights?  

1. Do LED strip lights use a lot of electricity?

2. Why are LED lights energy efficient?

3. Are LED Strip Lights sustainable?

4. What are the pron and cons of led strip lights?

5. Precautions for led strip lights

Are led strip lights safe?

1. Do LED strip lights overheat?

2. How do you stop LED strips from overheating?

3. Can LED strips catch fire?

4. Is it safe to sleep with LED strip lights on?  

What are the types of led strip lights? Flexible led strip lights VS rigid led strip lights -

1. What are flexible led strip lights?

2. What are rigid led strip lights?

3. What happens if you bend LED strip lights?

4. What is the difference between flexible led strips and rigid led strips?

How to cut led light strips? 

1. Can you cut led light strips? 

2. What happens if you cut an led strip?

3. How to cut led strip lights?

4. How to connect RGB color changing led strip lights with a connector?

5. How to know what your led strip light is?

How to choose the correct SMD led for your strip?

Which is the brightest SMD LED?

What does SMD 5050 mean?

How many lumens is a 5050 SMD LED?

How to know what type of LED strip?

What is the difference between 2835 and 5050 LED?

 

►COB led strip light

What is COB led strip light?

1. What is COB?

2. What is the COB production process? 

3. Different types of COB strip lights

4. What is the difference between COB and SMD led strip lights?

5. What is the difference between COB and LED?

6. Are COB led strips better?

7. How to cut and connect COB led strips?

8. How to install COB led strip lights?

9. Can COB light strips use aluminum channels?

10. Why choose superlightingled?

 

►Led neon lights

What are led neon lights?

1. What is led neon light?

2. What are neon led lights used for?

3. Are led neon lights good?

4. How to choose led neon rope lights?

5. Are led neon ropes use DC or AC?

6. Can you change the light-emitting angle or the luminous way of neon led strip?

7. Silicone Tube VS PVC Tube

How to make led neon lights?

1. How to cut led neon lights

2. Can led neon lights be connected?

3. Easy 7 steps to make led neon lights

4. How to install led neon rope?

 

►Addressable led strip

Ultimate Guide to Choosing the Right Addressable LED Strip

What is an addressable LED strip?

Can you cut addressable LED strips?

How to judge if an LED strip is individually addressable?

How to choose the best DC12V addressable led strips?

How to choose the best DC5V digital led strips?

How to choose the right IC for your project?

Which IC is most commonly used?

How do I know my IC type?

How do I know if my IC is good or bad?

How many types of IC are there?

How to wire addressable led strips?

 

►Color, color temperature, and CRI

The Color Difference Between Warm White 2700K, 3000K, 4000K, 6000K Pure White and 7000K Cool White

1. What is color temperature?

2. What color temperature is right for me?

• 2700K VS 3000K

• How obvious is the difference between 2700K and 3000K?

• Warm White 3000K VS Natural White 4000K VS Daylight White 6000K

• Warm White VS Cool White

3. Enjoy 2700K, 4000K, 6000K

4. Further Reading: How to install Warm White LED light strip?

How to choose the right color for your led strip lights? -

1. How many colors are in LED strip lights? 

2. What do LED light colors mean?

3. Why do white LED light turns to yellow? 

4. Why are your led strip lights not the same color?

5. What is the most relaxing color for LED lights? 

6. What color led lights is best for sleeping?

7. Are led lights bad for your eyes? 

8. Is cool white or warm white better for eyes?

What is color temperature?

1. What is the best color temperature?

2. Does color temperature keep the same as time goes by?

3. What color temperature is best for night?

4. Led strip lights about color temperature,CCT VS RGBW VS RGBCCT;

What is color rendering in​dex?

1. What is CRI in led lights?

2. How to choose the right CRI when buying led strip lights?

3. What is the relationship between CRI and brightness?

4. Is higher CRI better? High CRI VS Low CRI;

5. How to find CRI value? 

 


Led strip light connection

How to connect led strip lights?

1. How to connect led strip lights together?

2. How to connect LED light strips without connectors?

3. How to solder wires to LED strips?

4. How to connect LED strips without soldering?

5. Which one is better between soldering and using a connector?

6. How to connect mutiple led strip lights?

7. How many LED strip lights can you connect?

How to connect led strip to the power supply?

1. Ensuring the working voltage and power first

2. How to hardwire led strip lights?

3. Can I connect multiple LED strips to the same LED power supply?

How to wire led strip lights?

How to wire single color led strip lights?

How to wire tunable white/CCT led strip lights?

How to wire RGB color changing led strip lights?

How to wire RGBW led strips?

How to wire RGBCCT led strip lights?

How to wire addressable led strips?

 


Controller for led strip lights

How to choose led strip light controllers?

1. WIFI controller

2. RF controller

3. IR controller

4. Bluetooth controller

5. Remote control and panel control

6. Single color controller and multi-color controller

7. DMX512 controller

8. SPI controller

9. DALI controller

10. 0/1-10V dimmer

11. Triac series

12. Sonsor series

 


Led power supply

How to calculate power for led strip lights?

4 steps to calculate the power you need

Performance And Reasons Of LED Voltage Drop

How to choose led strip light power supply?

1. Alternating current power supply VS Direct current power supply

2. Constant current power supply VS Constant voltage power supply

3. How to choose the best led power supply for your led strip light?

 


Led strip light installlation

How to install led strip lights? What accessories will be needed?

1. Adhesive installation for IP20 and IP65 led strip lights

2. How to choose the right led tape?

3. Can IP20 and IP65 led strip lights use aluminum profiles?

4. How to use aluminum profiles?

5. Mounted clip installation for IP67 and IP68 light strips

How to install LED sensor stair lights?

Lighting Up Your Stairs With LED Strip Lights Ideas

How to install led strip lights on TV?

How to install led strip lights outdoor?

 


Accessories

How to choose led strip light connectors?

1. Are all LED light strip connectors the same?

2. How do LED strip lights connectors work?

3. What connectors do you need for LED strip lights?

4.  What are the different kinds of LED connectors?

5. How to choose the right connector for your led strip lights?

Ultimate Guide on Aluminum Profile for LED Strip Lighting

1. What are aluminium profiles used for?

2. Why choose aluminum profiles?

3. Different types of LED aluminum profiles

4. LED aluminum profile VS COB LED strips

5. How to install LED aluminum channels?

6. How To Get Ideal Light Diffuser For Your LED Strip?

7. Add Black Aluminum LED Light Diffusers For Your Home Lighting

8. How To Find The Right Aluminum LED Light Strip Diffuser Channel?

 

Customers who bought this product also purchased...

Scroll for more →