Arduino UNO Controllable Individually Addressable WS2812B COB LED Strips - DC5V Super Density 160Chips/m

WS2812B (WS2812) ture individually addressable COB (chip-on-board) RGB led strip light 5m/16.4ft reel, the entire PCB is covered by a silicone diffusion layer. LED light-emitting chips are directly packaged on the PCB, so it can integrate 60, 100, 160, 240 LEDs on the 2.7mm, 5mm, 10mm tape per meter. These Fcob RGB lights are controlled by WS2812 ICs, compatible with SPI LED controller to output 16 million color changes, dynamic color tracking and static arbitrary adjustment to control the color change speed and brightness of the LED light strip, to meet your most extreme demands. 

These addressable COB led strip supports DC5V and DC12V low voltage input, safe and efficient. For outdoor environmental lighting, we have developed an IP67 waterproof LED light strip that can withstand sprays and splashes from all directions. It cannot be immersed in water, but it can withstand various factors. You can purchase waterproof LED extension wire to complete your outdoor cob solutions. 

Various Options You Can Choose: 

Due to the low 5-volt supply, the LED will only function properly for lengths of 1 to 2 meters. Significant voltage drop will occur over 5-meter lengths—please take this into account. Carefully calculate the total required COB length and IC pixel count, then select an appropriate power supply and control system based on these specifications.

Product Specification

LED Strip Type: DreamColor COB RGB LED Strips

LED Chip: SMD1022 Epistar Chip

IC Type: WS2812B

LED Quantity: 5V Slim 5mm 160/m, 5V Slim 5mm 100/m, 12V Slim 5mm 160/m, 12V Slim 5mm 240/m

Strip Length: 5m 16.4ft

Strip Height: 2.5mm

Luminous Flux:   2-3 lumens/ LED

Beam Pattern: 180 degree

Water Proof: Non-Waterproof IP20, Waterproof IP67

Working Temperature:   -4°F (-20°C) ~ 122°F (50°C)

Storage Temperature:   -40°F (-40°C) ~ 176°F (80°C)