WS2812 24 x 5050 RGB Neopixel Ring With Integrated Drivers

Model: NPR-WS2812-RGBX24 Review stars 0.0 (0 Reviews) Various options in stock
Starting at: $9.99
Qty Discounts Off Price
1-4
$9.99
5-9
$9.79
10-14
$9.49
15+
$9.09
* Discounts may vary based on options below
Select Specifications:
Qty: -+
Free shipping over $299Ships via DHL / UPSWarranty covered

Accept the project customization, please contact us for commercial offers and technical support.

  • Product Information
  • Reviews
  • Downloads
  • Images
  • LED Strip Light Guide

Product Information

24 ultra-bright smart LED NeoPixels are arranged on a circular PCB with an outer diameter of 2.6ft (66mm). These neopixel ring shaped RGB lights can be simply cascaded through the output pins to connect one to the other input pins (DI-DO). By cascading this way, you can control as much as possible with only one single-chip microcomputer pin. LED lights. Each LED integrates a WS2812 driver chip inside, which makes our LEDs smart and addressable. The driving current of each LED lamp is the same, so the colour of each LED lamp is highly consistent, even if the voltage changes, it will not affect the brightness of the lamp beads. Neopixels has a built-in signal shaping circuit. After receiving the signal, any pixel will undergo waveform shaping and then output it to ensure that the line waveform distortion will not accumulate. The circular design of the ring-shaped lamp makes the whole product look simple and clean.

Single-wire communication can minimize the pressure on the I/O port of the single-chip microcomputer. In addition, this addressable RGB LED light uses the WS2812 driver chip so that the peripheral circuit only needs a capacitor to meet the circuit needs, and the circuit can be made simple and beautiful. Enjoy beauty. The three primary colours of each pixel circle maker can achieve 256 levels of brightness display, complete the full true colour display of 16,777,216 colours, and the scanning frequency is not less than 400Hz/s.

 

Standards and Certifications

12VDC CE FCC RoHS ISA SGS ISO LIFETIME warranty led factory

 

Specifications

Work Voltage: DC5V

Current: 18mA/led

LED Quantity: 24 LEDs

IC Chip: WS2812

Color: RGB

Dimensions: 

* Outer Diameter: 86 mm

* Inner Diameter: 72 mm

 

Reviews

Customer Experience

Your feedback is important to us! Share your thoughts and photos with other customers.

Downloads

Files for NPR-WS2812-RGBX24
Need this page for a project file or an engineering check? Click Open PDF, then save or print it from your browser. For CAD drawings, IES files or a signed test report, contact our engineers and quote the model number.

Images

These images were taken with Canon EOS 5D Mark IV and the studio light source is provided by Ra 98's full spectrum LED strip to realistically reproduce the colors of the item itself. All copyrights are created by the superlightingled team, please feel free to browse and download if you are a registered user!

WS2812 24 x 5050 RGB Neopixel Ring With Integrated DriversWS2812 24 x 5050 RGB Neopixel Ring With Integrated DriversWS2812 24 x 5050 RGB Neopixel Ring With Integrated DriversWS2812 24 x 5050 RGB Neopixel Ring With Integrated Drivers

LED Strip Light Guide

Common questions about this type of product, answered against this model’s own options. For full figures see the specification above or the spec sheet for this model.

Which controller does this LED strip light need?
Addressable LED strip lights take a data signal, so they need an SPI (pixel) controller that supports this IC — an ordinary RGB controller will not drive them. Data flows one way: connect the controller to the input end marked with the arrow. Wiring addressable LED strip lights
Do I need power injection?
5 V addressable LED strip lights lose voltage fastest, so longer runs need power fed in at both ends and at intervals along the run; 12 V and 24 V versions carry further. Keep the data line short between controller and first pixel. Choosing an addressable LED strip light
Can I cut it to length?
Yes. Cut only on the marked cut lines between the copper pads — the cut interval for this model is on its spec sheet. Rejoin with solder or a solderless connector. Connector options on this model: 3 Pin JST Connector · No. Cutting LED strip lights · we can also cut to length and fit your connector before shipping: custom LED strip light assembly.
What size power supply do I need?
Take the watts per metre from the specification above, multiply by the length you are running, then add about 25% headroom. Power calculation guide · Choosing a power supply
Complete your setup
Picked for this model from items in stock.

Customers who bought this product also purchased...

Scroll for more →