Single row side emititng series DC12/24V 335SMD 600LEDs Flexible LED Strip - Waterproof IP67 - 16.4ft/Roll

High-Density Side-Emitting Beam

Features 600 LEDs per 5-meter roll (120/m) that emit light from the edge of the strip, creating a bright, uniform glow ideal for edge-lighting acrylic, cove lighting, and signage.

Flexible IP67 Waterproofing

Encased in a hollow silicone tube, this strip offers excellent IP67 protection for outdoor use without sacrificing the flexibility needed for curved installations.

Bright & Efficient 335 SMDs

Utilizes compact 335 SMD LEDs to deliver high brightness from a slim profile, ensuring powerful illumination for accent and task lighting applications.

Customizable Options

Choose between 12VDC or 24VDC operation and select from Daylight White (6000K), Natural White (4000K), or Warm White (3000K) to match your project's ambiance. Solid colors are also available.

Easy to Customize

The strip can be cut every 3/6 LEDs, allowing you to tailor the length precisely for your needs. Optional waterproof connectors simplify installation.

• Always use a power supply rated for the correct voltage (12V or 24V) and with at least 20% more wattage capacity than the strip's total power draw (minimum 60W for a full roll).

• The IP67 rating applies to the strip itself. All connections must be properly sealed with waterproof connectors or methods to be suitable for outdoor use.
• For runs longer than 16.4ft, power must be supplied from both ends to avoid voltage drop and ensure consistent brightness.

Q: How is this IP67 strip different from an IP68 one?

A:This IP67 strip uses a hollow silicone tube, making it highly flexible and resistant to water jets and temporary immersion. IP68 strips are typically solid-filled (potted) and are suitable for continuous submersion, but are much more rigid.

Q: Can I cut this waterproof strip and reconnect it?

A:Yes, you can cut the strip on the designated cut lines. To maintain the waterproof rating, you must seal the cut end with a silicone end cap and adhesive, and use IP67-rated waterproof connectors for any joins.

Q: What is the difference between the 12V and 24V versions?

A:The 24V version is more efficient for longer runs as it suffers from less voltage drop, meaning brightness will stay more consistent over the length of the strip. For a single 5m roll, both perform similarly.

Q: What power supply do I need for one full 16.4ft roll?

A:The strip consumes 48 watts. We recommend a 12V or 24V power supply (matching your strip's voltage) with a rating of at least 60 watts to provide a safe 20% power buffer.

Q: How can I tell which wire is the positive side of the LED strip?

A:The PCB of the strip is typically marked with a '+' symbol for the positive connection and a '-' symbol for the negative connection near the solder pads or connector.